Re: [PATCH 2/3] RTC: omap-rtc: enable pm_runtime

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 19.10.2012 12:58, Mohammed, Afzal wrote:
> Hi Daniel,
> 
> On Thu, Oct 18, 2012 at 22:03:13, Hiremath, Vaibhav wrote:
>> On Thu, Oct 18, 2012 at 21:49:44, Daniel Mack wrote:
>>> On 18.10.2012 18:12, Vaibhav Hiremath wrote:
> 
>>>> It would be really helpful if you could test these patches and ack them.
> 
>>> Ok, will do tomorrow. What's missing there is support for writing to the
>>> OMAP_RTC_OSC_REG (path 3/3 in my series). Would like me to rebase the
>>> functionality? I need thatkind of setup for my board ...
> 
>> This is bit tricky and required more discussion before merging it, 
>> let me reopen the old discussion which I had started some time back -
>>
>>
>> RTC OSC clock is required to configure clocksource systemtimer for the 
>> kernel, and it is important when you get into PM related features.
>>
>> Please refer the below commit for more reference,
>>
>> http://marc.info/?l=u-boot&m=135057734713796&w=2
> 
> Newer version (v4) of omap rtc patches for am335x has been
> posted, "rtc: omap dt support (for am33xx)".
> In case you can test, please do it over the new series.
> 
> You would need also need DT patch that adds DT node to
> test (it has been separated from the series as it is
> felt that it should not be part of same series),
> "arm/dts: am33xx rtc node"

Agreed. I tested your patches and they do basically the same thing than
mine. You can take my

  Tested-by: Daniel Mack <zonque@xxxxxxxxx>

on all patches in this series except for 2/5 which I didn't test as I
don't have any Davinci platform.

> If you are using mainline uboot, you would need the fix as
> mentioned by Vaibhav H (as in the link he provided above),
> expecting it to reach uboot mainline soon.
> 
> If the above is being attempted to achieve in Kernel it
> would cause 2-3 seconds delay in boot time (else it had
> to be made a module), please refer link provided by
> Vaibhav H for more details.
> 
> else you can do in current mainline uboot,
> 
> mw.l 0x44e3e06c 0x83e70b13
> mw.l 0x44e3e070 0x95a4f1e0
> mw.b 0x44e3e054 0x48
>
> and then boot kernel.

I'm surprised that survives the kernel boot, but I'll give it a try. In
case you want to add that logic to the kernel as well, please copy me in
the discussion :)


Thanks,
Daniel

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux