Hi Avinash,
This look good to me except the: status = "disabled".
The "disabled" should be reserved for variant that does not contain the IP.
Is it the case here?
Regards,
Benoit
On 09/18/2012 07:30 AM, Philip, Avinash wrote:
> Add McSPI data node to AM33XX device tree file. The McSPI module (and so
> as the driver) is reused from OMAP4.
>
> Signed-off-by: Philip, Avinash <avinashphilip@xxxxxx>
> Tested-by: Matt Porter <mporter@xxxxxx>
> ---
> Changes since v1:
> - Corrected reg offset in reg DT entry.
>
> :100644 100644 ff3badb... 065fd54... M arch/arm/boot/dts/am33xx.dtsi
> arch/arm/boot/dts/am33xx.dtsi | 25 +++++++++++++++++++++++++
> 1 files changed, 25 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> index ff3badb..065fd54 100644
> --- a/arch/arm/boot/dts/am33xx.dtsi
> +++ b/arch/arm/boot/dts/am33xx.dtsi
> @@ -219,5 +219,30 @@
> interrupt-parent = <&intc>;
> interrupts = <91>;
> };
> +
> + spi0: spi@48030000 {
> + compatible = "ti,omap4-mcspi";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x48030000 0x400>;
> + interrupt-parent = <&intc>;
> + interrupt = <65>;
> + ti,spi-num-cs = <2>;
> + ti,hwmods = "spi0";
> + status = "disabled";
> +
> + };
> +
> + spi1: spi@481a0000 {
> + compatible = "ti,omap4-mcspi";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x481a0000 0x400>;
> + interrupt-parent = <&intc>;
> + interrupt = <125>;
> + ti,spi-num-cs = <2>;
> + ti,hwmods = "spi1";
> + status = "disabled";
> + };
> };
> };
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
