On Thu, Oct 18, 2012 at 07:20:05PM -0700, Tony Lindgren wrote:
> Let's move what we can from plat/usb.h to the local usb.h
> for ARM common zImage support.
>
> This is needed so we can remove plat/usb.h for ARM common
> zImage support.
>
> Cc: Felipe Balbi <balbi@xxxxxx>
Acked-by: Felipe Balbi <balbi@xxxxxx>
> Cc: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
> Cc: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> Cc: Partha Basak <parthab@xxxxxxxxxxxx>
> Cc: Keshava Munegowda <keshava_mgowda@xxxxxx>
> Cc: linux-usb@xxxxxxxxxxxxxxx
> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
> ---
> arch/arm/mach-omap1/clock.c | 1
> arch/arm/mach-omap2/board-2430sdp.c | 1
> arch/arm/mach-omap2/board-3430sdp.c | 1
> arch/arm/mach-omap2/board-3630sdp.c | 1
> arch/arm/mach-omap2/board-4430sdp.c | 1
> arch/arm/mach-omap2/board-am3517crane.c | 1
> arch/arm/mach-omap2/board-am3517evm.c | 1
> arch/arm/mach-omap2/board-cm-t35.c | 1
> arch/arm/mach-omap2/board-cm-t3517.c | 1
> arch/arm/mach-omap2/board-devkit8000.c | 1
> arch/arm/mach-omap2/board-igep0020.c | 1
> arch/arm/mach-omap2/board-ldp.c | 1
> arch/arm/mach-omap2/board-omap3beagle.c | 1
> arch/arm/mach-omap2/board-omap3evm.c | 1
> arch/arm/mach-omap2/board-omap3logic.c | 1
> arch/arm/mach-omap2/board-omap3pandora.c | 1
> arch/arm/mach-omap2/board-omap3stalker.c | 1
> arch/arm/mach-omap2/board-omap3touchbook.c | 1
> arch/arm/mach-omap2/board-omap4panda.c | 1
> arch/arm/mach-omap2/board-overo.c | 1
> arch/arm/mach-omap2/board-rm680.c | 1
> arch/arm/mach-omap2/board-rx51.c | 1
> arch/arm/mach-omap2/board-ti8168evm.c | 1
> arch/arm/mach-omap2/board-zoom-peripherals.c | 1
> arch/arm/mach-omap2/board-zoom.c | 1
> arch/arm/mach-omap2/common.h | 2
> arch/arm/mach-omap2/omap_phy_internal.c | 4 -
> arch/arm/mach-omap2/twl-common.c | 1
> arch/arm/mach-omap2/usb-host.c | 2
> arch/arm/mach-omap2/usb-musb.c | 2
> arch/arm/mach-omap2/usb.h | 82 ++++++++++++++++++++
> arch/arm/plat-omap/include/plat/usb.h | 106 --------------------------
> 32 files changed, 88 insertions(+), 136 deletions(-)
> create mode 100644 arch/arm/mach-omap2/usb.h
>
> diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
> index 638f407..1e49eda 100644
> --- a/arch/arm/mach-omap1/clock.c
> +++ b/arch/arm/mach-omap1/clock.c
> @@ -22,7 +22,6 @@
> #include <asm/mach-types.h>
>
> #include <plat/cpu.h>
> -#include <plat/usb.h>
> #include <plat/clock.h>
> #include <plat/sram.h>
> #include <plat/clkdev_omap.h>
> diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
> index 95b384d..df561ad 100644
> --- a/arch/arm/mach-omap2/board-2430sdp.c
> +++ b/arch/arm/mach-omap2/board-2430sdp.c
> @@ -35,7 +35,6 @@
>
> #include "common.h"
> #include <plat/gpmc.h>
> -#include <plat/usb.h>
> #include "gpmc-smc91x.h"
>
> #include <video/omapdss.h>
> diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
> index 96cd369..14c07ee 100644
> --- a/arch/arm/mach-omap2/board-3430sdp.c
> +++ b/arch/arm/mach-omap2/board-3430sdp.c
> @@ -30,7 +30,6 @@
> #include <asm/mach/arch.h>
> #include <asm/mach/map.h>
>
> -#include <plat/usb.h>
> #include "common.h"
> #include <plat/dma.h>
> #include <plat/gpmc.h>
> diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
> index fc224ad..f8e6288 100644
> --- a/arch/arm/mach-omap2/board-3630sdp.c
> +++ b/arch/arm/mach-omap2/board-3630sdp.c
> @@ -18,7 +18,6 @@
>
> #include "common.h"
> #include "gpmc-smc91x.h"
> -#include <plat/usb.h>
>
> #include <mach/board-zoom.h>
>
> diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
> index 3669c12..5700fc5 100644
> --- a/arch/arm/mach-omap2/board-4430sdp.c
> +++ b/arch/arm/mach-omap2/board-4430sdp.c
> @@ -34,7 +34,6 @@
> #include <asm/mach/map.h>
>
> #include "common.h"
> -#include <plat/usb.h>
> #include <plat/mmc.h>
> #include "omap4-keypad.h"
> #include <video/omapdss.h>
> diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
> index 318fead..603503c 100644
> --- a/arch/arm/mach-omap2/board-am3517crane.c
> +++ b/arch/arm/mach-omap2/board-am3517crane.c
> @@ -26,7 +26,6 @@
> #include <asm/mach/map.h>
>
> #include "common.h"
> -#include <plat/usb.h>
>
> #include "am35xx-emac.h"
> #include "mux.h"
> diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
> index e162897..0dbeb77 100644
> --- a/arch/arm/mach-omap2/board-am3517evm.c
> +++ b/arch/arm/mach-omap2/board-am3517evm.c
> @@ -33,7 +33,6 @@
> #include <asm/mach/map.h>
>
> #include "common.h"
> -#include <plat/usb.h>
> #include <video/omapdss.h>
> #include <video/omap-panel-generic-dpi.h>
> #include <video/omap-panel-tfp410.h>
> diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
> index 376d26e..435c7be 100644
> --- a/arch/arm/mach-omap2/board-cm-t35.c
> +++ b/arch/arm/mach-omap2/board-cm-t35.c
> @@ -41,7 +41,6 @@
> #include "common.h"
> #include <linux/platform_data/mtd-nand-omap2.h>
> #include <plat/gpmc.h>
> -#include <plat/usb.h>
> #include <video/omapdss.h>
> #include <video/omap-panel-generic-dpi.h>
> #include <video/omap-panel-tfp410.h>
> diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
> index 59c0a45..db1e14c 100644
> --- a/arch/arm/mach-omap2/board-cm-t3517.c
> +++ b/arch/arm/mach-omap2/board-cm-t3517.c
> @@ -39,7 +39,6 @@
> #include <asm/mach/map.h>
>
> #include "common.h"
> -#include <plat/usb.h>
> #include <linux/platform_data/mtd-nand-omap2.h>
> #include <plat/gpmc.h>
>
> diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
> index 1fd161e..8df2720 100644
> --- a/arch/arm/mach-omap2/board-devkit8000.c
> +++ b/arch/arm/mach-omap2/board-devkit8000.c
> @@ -41,7 +41,6 @@
> #include "common.h"
> #include <plat/gpmc.h>
> #include <linux/platform_data/mtd-nand-omap2.h>
> -#include <plat/usb.h>
> #include <video/omapdss.h>
> #include <video/omap-panel-generic-dpi.h>
> #include <video/omap-panel-tfp410.h>
> diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
> index 48d5e41..62da89f 100644
> --- a/arch/arm/mach-omap2/board-igep0020.c
> +++ b/arch/arm/mach-omap2/board-igep0020.c
> @@ -31,7 +31,6 @@
>
> #include "common.h"
> #include <plat/gpmc.h>
> -#include <plat/usb.h>
>
> #include <video/omapdss.h>
> #include <video/omap-panel-tfp410.h>
> diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
> index ee8c3cf..8d9406b 100644
> --- a/arch/arm/mach-omap2/board-ldp.c
> +++ b/arch/arm/mach-omap2/board-ldp.c
> @@ -37,7 +37,6 @@
> #include "common.h"
> #include <plat/gpmc.h>
> #include <mach/board-zoom.h>
> -#include <plat/usb.h>
> #include "gpmc-smsc911x.h"
>
> #include <video/omapdss.h>
> diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
> index 388c431..33a5f58 100644
> --- a/arch/arm/mach-omap2/board-omap3beagle.c
> +++ b/arch/arm/mach-omap2/board-omap3beagle.c
> @@ -43,7 +43,6 @@
> #include <video/omap-panel-tfp410.h>
> #include <plat/gpmc.h>
> #include <linux/platform_data/mtd-nand-omap2.h>
> -#include <plat/usb.h>
> #include <plat/omap_device.h>
>
> #include "mux.h"
> diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
> index b9b776b..6e7e69b 100644
> --- a/arch/arm/mach-omap2/board-omap3evm.c
> +++ b/arch/arm/mach-omap2/board-omap3evm.c
> @@ -45,7 +45,6 @@
> #include <asm/mach/arch.h>
> #include <asm/mach/map.h>
>
> -#include <plat/usb.h>
> #include <linux/platform_data/mtd-nand-omap2.h>
> #include "common.h"
> #include <linux/platform_data/spi-omap2-mcspi.h>
> diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
> index 7bd8253..a0d8fe1 100644
> --- a/arch/arm/mach-omap2/board-omap3logic.c
> +++ b/arch/arm/mach-omap2/board-omap3logic.c
> @@ -37,7 +37,6 @@
> #include "gpmc-smsc911x.h"
> #include <plat/gpmc.h>
> #include <plat/sdrc.h>
> -#include <plat/usb.h>
>
> #include "common.h"
> #include "mux.h"
> diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
> index 00a1f4a..f2be51b 100644
> --- a/arch/arm/mach-omap2/board-omap3pandora.c
> +++ b/arch/arm/mach-omap2/board-omap3pandora.c
> @@ -42,7 +42,6 @@
> #include <asm/mach/map.h>
>
> #include "common.h"
> -#include <plat/usb.h>
> #include <video/omapdss.h>
> #include <linux/platform_data/mtd-nand-omap2.h>
>
> diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
> index 731235e..4343fb6 100644
> --- a/arch/arm/mach-omap2/board-omap3stalker.c
> +++ b/arch/arm/mach-omap2/board-omap3stalker.c
> @@ -42,7 +42,6 @@
> #include "common.h"
> #include <plat/gpmc.h>
> #include <linux/platform_data/mtd-nand-omap2.h>
> -#include <plat/usb.h>
> #include <video/omapdss.h>
> #include <video/omap-panel-generic-dpi.h>
> #include <video/omap-panel-tfp410.h>
> diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
> index 944ffc4..c26c958 100644
> --- a/arch/arm/mach-omap2/board-omap3touchbook.c
> +++ b/arch/arm/mach-omap2/board-omap3touchbook.c
> @@ -46,7 +46,6 @@
> #include "common.h"
> #include <plat/gpmc.h>
> #include <linux/platform_data/mtd-nand-omap2.h>
> -#include <plat/usb.h>
>
> #include "mux.h"
> #include "hsmmc.h"
> diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
> index bfcd397..74e39bb 100644
> --- a/arch/arm/mach-omap2/board-omap4panda.c
> +++ b/arch/arm/mach-omap2/board-omap4panda.c
> @@ -39,7 +39,6 @@
> #include <video/omapdss.h>
>
> #include "common.h"
> -#include <plat/usb.h>
> #include <plat/mmc.h>
> #include <video/omap-panel-tfp410.h>
>
> diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
> index b700685..0eed6da 100644
> --- a/arch/arm/mach-omap2/board-overo.c
> +++ b/arch/arm/mach-omap2/board-overo.c
> @@ -50,7 +50,6 @@
> #include <video/omap-panel-generic-dpi.h>
> #include <video/omap-panel-tfp410.h>
> #include <plat/gpmc.h>
> -#include <plat/usb.h>
>
> #include "mux.h"
> #include "sdram-micron-mt46h32m32lf-6.h"
> diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
> index 45997bf..d55a983 100644
> --- a/arch/arm/mach-omap2/board-rm680.c
> +++ b/arch/arm/mach-omap2/board-rm680.c
> @@ -24,7 +24,6 @@
>
> #include <plat/i2c.h>
> #include <plat/mmc.h>
> -#include <plat/usb.h>
> #include <plat/gpmc.h>
> #include "common.h"
> #include <plat/serial.h>
> diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
> index 7bbb05d..8c4d27e 100644
> --- a/arch/arm/mach-omap2/board-rx51.c
> +++ b/arch/arm/mach-omap2/board-rx51.c
> @@ -26,7 +26,6 @@
> #include "common.h"
> #include <plat/dma.h>
> #include <plat/gpmc.h>
> -#include <plat/usb.h>
>
> #include "mux.h"
> #include "pm.h"
> diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c
> index c4f8833..4977c77 100644
> --- a/arch/arm/mach-omap2/board-ti8168evm.c
> +++ b/arch/arm/mach-omap2/board-ti8168evm.c
> @@ -20,7 +20,6 @@
> #include <asm/mach/map.h>
>
> #include "common.h"
> -#include <plat/usb.h>
>
> static struct omap_musb_board_data musb_board_data = {
> .set_phy_power = ti81xx_musb_phy_power,
> diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
> index c166fe1..ce923b7 100644
> --- a/arch/arm/mach-omap2/board-zoom-peripherals.c
> +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
> @@ -26,7 +26,6 @@
> #include <asm/mach/map.h>
>
> #include "common.h"
> -#include <plat/usb.h>
>
> #include <mach/board-zoom.h>
>
> diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
> index 4994438..6e1afae 100644
> --- a/arch/arm/mach-omap2/board-zoom.c
> +++ b/arch/arm/mach-omap2/board-zoom.c
> @@ -22,7 +22,6 @@
> #include <asm/mach/arch.h>
>
> #include "common.h"
> -#include <plat/usb.h>
>
> #include <mach/board-zoom.h>
>
> diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
> index 7045e4d..fa2f4c9 100644
> --- a/arch/arm/mach-omap2/common.h
> +++ b/arch/arm/mach-omap2/common.h
> @@ -36,6 +36,8 @@
> #include <plat/serial.h>
> #include <plat/common.h>
>
> +#include "usb.h"
> +
> #define OMAP_INTC_START NR_IRQS
>
> #ifdef CONFIG_SOC_OMAP2420
> diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
> index d992db8..4d76a3c 100644
> --- a/arch/arm/mach-omap2/omap_phy_internal.c
> +++ b/arch/arm/mach-omap2/omap_phy_internal.c
> @@ -27,11 +27,11 @@
> #include <linux/io.h>
> #include <linux/err.h>
> #include <linux/usb.h>
> -
> -#include <plat/usb.h>
> +#include <linux/usb/musb.h>
>
> #include "soc.h"
> #include "control.h"
> +#include "usb.h"
>
> void am35x_musb_reset(void)
> {
> diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
> index 635e109..1131d47 100644
> --- a/arch/arm/mach-omap2/twl-common.c
> +++ b/arch/arm/mach-omap2/twl-common.c
> @@ -27,7 +27,6 @@
> #include <linux/regulator/fixed.h>
>
> #include <plat/i2c.h>
> -#include <plat/usb.h>
>
> #include "soc.h"
> #include "twl-common.h"
> diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
> index 3c43449..b1cf8c8 100644
> --- a/arch/arm/mach-omap2/usb-host.c
> +++ b/arch/arm/mach-omap2/usb-host.c
> @@ -25,10 +25,10 @@
>
> #include <asm/io.h>
>
> -#include <plat/usb.h>
> #include <plat/omap_device.h>
>
> #include "mux.h"
> +#include "usb.h"
>
> #ifdef CONFIG_MFD_OMAP_USB_HOST
>
> diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
> index 51da21c..faf473f 100644
> --- a/arch/arm/mach-omap2/usb-musb.c
> +++ b/arch/arm/mach-omap2/usb-musb.c
> @@ -25,12 +25,12 @@
> #include <linux/io.h>
> #include <linux/usb/musb.h>
>
> -#include <plat/usb.h>
> #include <plat/omap_device.h>
>
> #include "am35xx.h"
>
> #include "mux.h"
> +#include "usb.h"
>
> static struct musb_hdrc_config musb_config = {
> .multipoint = 1,
> diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h
> new file mode 100644
> index 0000000..b2c4ff1
> --- /dev/null
> +++ b/arch/arm/mach-omap2/usb.h
> @@ -0,0 +1,82 @@
> +#include <plat/usb.h>
> +
> +/* AM35x */
> +/* USB 2.0 PHY Control */
> +#define CONF2_PHY_GPIOMODE (1 << 23)
> +#define CONF2_OTGMODE (3 << 14)
> +#define CONF2_NO_OVERRIDE (0 << 14)
> +#define CONF2_FORCE_HOST (1 << 14)
> +#define CONF2_FORCE_DEVICE (2 << 14)
> +#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
> +#define CONF2_SESENDEN (1 << 13)
> +#define CONF2_VBDTCTEN (1 << 12)
> +#define CONF2_REFFREQ_24MHZ (2 << 8)
> +#define CONF2_REFFREQ_26MHZ (7 << 8)
> +#define CONF2_REFFREQ_13MHZ (6 << 8)
> +#define CONF2_REFFREQ (0xf << 8)
> +#define CONF2_PHYCLKGD (1 << 7)
> +#define CONF2_VBUSSENSE (1 << 6)
> +#define CONF2_PHY_PLLON (1 << 5)
> +#define CONF2_RESET (1 << 4)
> +#define CONF2_PHYPWRDN (1 << 3)
> +#define CONF2_OTGPWRDN (1 << 2)
> +#define CONF2_DATPOL (1 << 1)
> +
> +/* TI81XX specific definitions */
> +#define USBCTRL0 0x620
> +#define USBSTAT0 0x624
> +
> +/* TI816X PHY controls bits */
> +#define TI816X_USBPHY0_NORMAL_MODE (1 << 0)
> +#define TI816X_USBPHY_REFCLK_OSC (1 << 8)
> +
> +/* TI814X PHY controls bits */
> +#define USBPHY_CM_PWRDN (1 << 0)
> +#define USBPHY_OTG_PWRDN (1 << 1)
> +#define USBPHY_CHGDET_DIS (1 << 2)
> +#define USBPHY_CHGDET_RSTRT (1 << 3)
> +#define USBPHY_SRCONDM (1 << 4)
> +#define USBPHY_SINKONDP (1 << 5)
> +#define USBPHY_CHGISINK_EN (1 << 6)
> +#define USBPHY_CHGVSRC_EN (1 << 7)
> +#define USBPHY_DMPULLUP (1 << 8)
> +#define USBPHY_DPPULLUP (1 << 9)
> +#define USBPHY_CDET_EXTCTL (1 << 10)
> +#define USBPHY_GPIO_MODE (1 << 12)
> +#define USBPHY_DPOPBUFCTL (1 << 13)
> +#define USBPHY_DMOPBUFCTL (1 << 14)
> +#define USBPHY_DPINPUT (1 << 15)
> +#define USBPHY_DMINPUT (1 << 16)
> +#define USBPHY_DPGPIO_PD (1 << 17)
> +#define USBPHY_DMGPIO_PD (1 << 18)
> +#define USBPHY_OTGVDET_EN (1 << 19)
> +#define USBPHY_OTGSESSEND_EN (1 << 20)
> +#define USBPHY_DATA_POLARITY (1 << 23)
> +
> +struct usbhs_omap_board_data {
> + enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
> +
> + /* have to be valid if phy_reset is true and portx is in phy mode */
> + int reset_gpio_port[OMAP3_HS_USB_PORTS];
> +
> + /* Set this to true for ES2.x silicon */
> + unsigned es2_compatibility:1;
> +
> + unsigned phy_reset:1;
> +
> + /*
> + * Regulators for USB PHYs.
> + * Each PHY can have a separate regulator.
> + */
> + struct regulator *regulator[OMAP3_HS_USB_PORTS];
> +};
> +
> +extern void usb_musb_init(struct omap_musb_board_data *board_data);
> +extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
> +
> +extern void am35x_musb_reset(void);
> +extern void am35x_musb_phy_power(u8 on);
> +extern void am35x_musb_clear_irq(void);
> +extern void am35x_set_mode(u8 musb_mode);
> +extern void ti81xx_musb_phy_power(u8 on);
> +
> diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
> index 87ee140..1dd6522 100644
> --- a/arch/arm/plat-omap/include/plat/usb.h
> +++ b/arch/arm/plat-omap/include/plat/usb.h
> @@ -26,24 +26,6 @@ enum usbhs_omap_port_mode {
> OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM
> };
>
> -struct usbhs_omap_board_data {
> - enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
> -
> - /* have to be valid if phy_reset is true and portx is in phy mode */
> - int reset_gpio_port[OMAP3_HS_USB_PORTS];
> -
> - /* Set this to true for ES2.x silicon */
> - unsigned es2_compatibility:1;
> -
> - unsigned phy_reset:1;
> -
> - /*
> - * Regulators for USB PHYs.
> - * Each PHY can have a separate regulator.
> - */
> - struct regulator *regulator[OMAP3_HS_USB_PORTS];
> -};
> -
> #ifdef CONFIG_ARCH_OMAP2PLUS
>
> struct ehci_hcd_omap_platform_data {
> @@ -83,97 +65,9 @@ struct omap_musb_board_data {
>
> enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
>
> -extern void usb_musb_init(struct omap_musb_board_data *board_data);
> -
> -extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
> extern int omap_tll_enable(void);
> extern int omap_tll_disable(void);
>
> -extern int omap4430_phy_power(struct device *dev, int ID, int on);
> -extern int omap4430_phy_set_clk(struct device *dev, int on);
> -extern int omap4430_phy_init(struct device *dev);
> -extern int omap4430_phy_exit(struct device *dev);
> -extern int omap4430_phy_suspend(struct device *dev, int suspend);
> -
> -#endif
> -
> -extern void am35x_musb_reset(void);
> -extern void am35x_musb_phy_power(u8 on);
> -extern void am35x_musb_clear_irq(void);
> -extern void am35x_set_mode(u8 musb_mode);
> -extern void ti81xx_musb_phy_power(u8 on);
> -
> -/* AM35x */
> -/* USB 2.0 PHY Control */
> -#define CONF2_PHY_GPIOMODE (1 << 23)
> -#define CONF2_OTGMODE (3 << 14)
> -#define CONF2_NO_OVERRIDE (0 << 14)
> -#define CONF2_FORCE_HOST (1 << 14)
> -#define CONF2_FORCE_DEVICE (2 << 14)
> -#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
> -#define CONF2_SESENDEN (1 << 13)
> -#define CONF2_VBDTCTEN (1 << 12)
> -#define CONF2_REFFREQ_24MHZ (2 << 8)
> -#define CONF2_REFFREQ_26MHZ (7 << 8)
> -#define CONF2_REFFREQ_13MHZ (6 << 8)
> -#define CONF2_REFFREQ (0xf << 8)
> -#define CONF2_PHYCLKGD (1 << 7)
> -#define CONF2_VBUSSENSE (1 << 6)
> -#define CONF2_PHY_PLLON (1 << 5)
> -#define CONF2_RESET (1 << 4)
> -#define CONF2_PHYPWRDN (1 << 3)
> -#define CONF2_OTGPWRDN (1 << 2)
> -#define CONF2_DATPOL (1 << 1)
> -
> -/* TI81XX specific definitions */
> -#define USBCTRL0 0x620
> -#define USBSTAT0 0x624
> -
> -/* TI816X PHY controls bits */
> -#define TI816X_USBPHY0_NORMAL_MODE (1 << 0)
> -#define TI816X_USBPHY_REFCLK_OSC (1 << 8)
> -
> -/* TI814X PHY controls bits */
> -#define USBPHY_CM_PWRDN (1 << 0)
> -#define USBPHY_OTG_PWRDN (1 << 1)
> -#define USBPHY_CHGDET_DIS (1 << 2)
> -#define USBPHY_CHGDET_RSTRT (1 << 3)
> -#define USBPHY_SRCONDM (1 << 4)
> -#define USBPHY_SINKONDP (1 << 5)
> -#define USBPHY_CHGISINK_EN (1 << 6)
> -#define USBPHY_CHGVSRC_EN (1 << 7)
> -#define USBPHY_DMPULLUP (1 << 8)
> -#define USBPHY_DPPULLUP (1 << 9)
> -#define USBPHY_CDET_EXTCTL (1 << 10)
> -#define USBPHY_GPIO_MODE (1 << 12)
> -#define USBPHY_DPOPBUFCTL (1 << 13)
> -#define USBPHY_DMOPBUFCTL (1 << 14)
> -#define USBPHY_DPINPUT (1 << 15)
> -#define USBPHY_DMINPUT (1 << 16)
> -#define USBPHY_DPGPIO_PD (1 << 17)
> -#define USBPHY_DMGPIO_PD (1 << 18)
> -#define USBPHY_OTGVDET_EN (1 << 19)
> -#define USBPHY_OTGSESSEND_EN (1 << 20)
> -#define USBPHY_DATA_POLARITY (1 << 23)
> -
> -#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB)
> -u32 omap1_usb0_init(unsigned nwires, unsigned is_device);
> -u32 omap1_usb1_init(unsigned nwires);
> -u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup);
> -#else
> -static inline u32 omap1_usb0_init(unsigned nwires, unsigned is_device)
> -{
> - return 0;
> -}
> -static inline u32 omap1_usb1_init(unsigned nwires)
> -{
> - return 0;
> -
> -}
> -static inline u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
> -{
> - return 0;
> -}
> #endif
>
> #endif /* __ASM_ARCH_OMAP_USB_H */
>
--
balbi
Attachment:
signature.asc
Description: Digital signature
