* Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx> [121012 08:56]: > For those who don't bother looking at my kautobuild boot tests on the OMAP > boards I have, here's the errors which get spat out at boot time. Note > that some of these I've reported in the past, and one of them is missing > a newline character at the end of its string. Thanks, let's get those fixed ASAP. > twd: can't register interrupt 45 (-22) > twd_local_timer_register failed -22 Hmm I think this regression was caused by my sparse IRQ changes, looks like I have a typo using OMAP_INTC_START in stead of the GIC base. Will do a patch for this. > omap_hwmod: mcpdm: cannot be enabled for reset (3) Paul, Benoit, care to take a look at this? > omap-gpmc omap-gpmc: error: clk_get > omap-gpmc: probe of omap-gpmc failed with error -2 I think Afzal posted something about this already? Looks like this too could be sparse IRQ related regression.. > Error setting wl12xx data: -38 Hmm I wonder if wl12xx_set_platform_data() is really supposed to return -EBUSY if platform_data exists? Ohad, can you please take a look? > omap_hsmmc omap_hsmmc.1: Failed to get debounce clk > omap_hsmmc omap_hsmmc.0: Failed to get debounce clk > omap_hsmmc omap_hsmmc.4: Failed to get debounce clk These should be optional AFAIK, so no warning should be printed. > twl6040-codec twl6040-codec: ASoC: Failed to create Capture debugfs file Peter, can you take a look please? > omap_vc_i2c_init: I2C config for vdd_iva does not match other channels (0). > omap_vc_i2c_init: I2C config for vdd_mpu does not match other channels (0).Power Management for TI OMAP4. Kevin? > mmc1: host does not support reading read-only switch. assuming write-enable. This too should be optional. > As of today, I've rebased my serial changes as far forward as I dare at > the moment (to the commit before removal of DMA), and then merged it > into the latest trees from armsoc and myself, fixing up all the horrid > conflicts. I've finally got it to a stage where at least it compiles, > but unfortunately something has broken serial output from userspace > quite badly to the point that it doesn't work. > > I know that my serial changes were fine before I tried rebasing them (the > set I posted to the mailing list certainly did work) so I suspect that > it's down to incompatibilities between the fixes done by others (who didn't > really understand all issues involved) and those done by myself. Have you been able to locate the breaking patches, maybe those could be reverted? Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
