Re: [PATCH v2 2/7] ARM: virt: allow the kernel to be entered in HYP mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



* Nicolas Pitre <nicolas.pitre@xxxxxxxxxx> [121005 18:33]:
> On Fri, 5 Oct 2012, Tony Lindgren wrote:
> 
> > * Tony Lindgren <tony@xxxxxxxxxxx> [121005 16:27]:
> > > * Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx> [121005 16:10]:
> > > > On Fri, Oct 05, 2012 at 01:08:22PM -0700, Tony Lindgren wrote:
> > > > > Just bisected this down in linux-next for breaking booting of
> > > > > my omap2420 ARMv6 based n8x0..
> > > > > 
> > > > > > --- a/arch/arm/kernel/head.S
> > > > > > +++ b/arch/arm/kernel/head.S
> > > > > > @@ -83,8 +83,12 @@ ENTRY(stext)
> > > > > >   THUMB(	.thumb			)	@ switch to Thumb now.
> > > > > >   THUMB(1:			)
> > > > > >  
> > > > > > -	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
> > > > > > -						@ and irqs disabled
> > > > > > +#ifdef CONFIG_ARM_VIRT_EXT
> > > > > > +	bl	__hyp_stub_install
> > > > > > +#endif
> > > > > > +	@ ensure svc mode and all interrupts masked
> > > > > > +	safe_svcmode_maskall r9
> > > > > > +
> > > > > >  	mrc	p15, 0, r9, c0, c0		@ get processor id
> > > > > >  	bl	__lookup_processor_type		@ r5=procinfo r9=cpuid
> > > > > >  	movs	r10, r5				@ invalid processor (r5=0)?
> > > > > 
> > > > > ..and looks like undoing this part fixes it. Any ideas?
> > > > > 
> > > > > I quickly tried disabling ARCH_OMAP3 and ARCH_OMAP4 so it's
> > > > > ARMv6 but that does not help.
> > 
> > The same kernel boots on 2430sdp, which is the same ARMv6 core
> > as 2430 if I remember correctly. So this hints that it has something
> > to do with the bits set differently by the bootloader?
> 
> Possibly.
> 
> What if you apply this on top:
> 
> diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
> index 683a1e6b60..b276c26e19 100644
> --- a/arch/arm/include/asm/assembler.h
> +++ b/arch/arm/include/asm/assembler.h
> @@ -254,8 +254,7 @@
>  	mov	lr , \reg
>  	and	lr , lr , #MODE_MASK
>  	cmp	lr , #HYP_MODE
> -	orr	\reg , \reg , #PSR_A_BIT | PSR_I_BIT | PSR_F_BIT
> -	bic	\reg , \reg , #MODE_MASK
> +	mov	\reg , #PSR_A_BIT | PSR_I_BIT | PSR_F_BIT
>  	orr	\reg , \reg , #SVC_MODE
>  THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
>  	msr	spsr_cxsf, \reg
> 
> 
> 

Thanks but that does not seem to help.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux