* Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx> [120926 10:23]:
>
> Op 26 sep. 2012, om 18:15 heeft Matt Porter <mporter@xxxxxx> het volgende geschreven:
>
> > On Wed, Sep 26, 2012 at 03:03:27PM +0200, Linus Walleij wrote:
> >> On Wed, Sep 26, 2012 at 2:56 PM, Matt Porter <mporter@xxxxxx> wrote:
> >>> Adding Linus W. and lkml.
> >>> On Wed, Sep 26, 2012 at 01:46:45PM +0200, Koen Kooi wrote:
> >>>> Hi,
> >>>>
> >>>> With a patched 3.6rc7 on my beaglebone I can set the pinmux for pins using pinctrl and that seems to work. On the 3.2 vendor tree there was the omap_mux driver with an awesome debugfs interface:
> >>>>
> >>>> # cat /sys/kernel/debug/omap_mux/lcd_data0
> >>>> name: lcd_data0.ehrpwm2A (0x44e108a0/0x8a0 = 0x0003), b NA, t NA
> >>>> mode: OMAP_PIN_OUTPUT | OMAP_MUX_MODE3
> >>>> signals: lcd_data0 | gpmc_a0 | pr1_mii_mt0_clk | ehrpwm2A | NA | pr1_pru1_pru_r30_0 | pr1_pru1_pru_r31_0 | gpio2_6
> >>>>
> >>>> Notice how it tells me that it's muxed the PWM in 2 ways: signal name (ehrpwm2A) and register content (0x0003). Compare to pinctrl:
> >>>>
> >>>> root@bone-mainline:/sys/kernel/debug/pinctrl/44e10800.pinmux# grep 8a0 *
> >>>> pinconf-pins:pin 40 (44e108a0):
> >>>> pingroups:pin 40 (44e108a0)
> >>>> pinmux-pins:pin 40 (44e108a0): 4a300000.pruss (GPIO UNCLAIMED) function pinmux_pruss_led_pins group pinmux_pruss_led_pins
> >>>> pins:pin 40 (44e108a0) pinctrl-single
> >>>>
> >>>> What is that pin muxed to? It is part of the 'pinmux_pruss_led_pins' in the DT, but debugfs remains mute on how pin 40 is muxed.
> >>>
> >>> It does seem like a pretty big gap in the pinctrl/pinmux debugfs
> >>> interface when viewed from an OMAP perspective. Ideally there would
> >>> be a pinctrl/pinmux hook to the pinmux driver to provide the detailed
> >>> h/w specific pin state info.
> >>
> >> So add the hooks you need?
> >
> > Ok. :)
> >
> >> I assume you are using Tony's pinctrl-single driver, so Tony is the one to ask.
> >
> > Yes, so roughly for pinctrl-single I have the following...likely broken
> > for arbitrary register sizes but a starting point. Tony, any thoughts
> > about this?
> >
> > Koen: you just need a userspace tool that groks the raw data for human
> > consumption. The nice thing is that the old omap_mux implementation had
> > plenty of OMAP-isms in the parser that didn't apply to AM33xx. A
> > userspace tool can do a better job of parsing on a per-part basis.
> >
> > --- a/drivers/pinctrl/pinctrl-single.c
> > +++ b/drivers/pinctrl/pinctrl-single.c
> > @@ -246,7 +246,15 @@ static void pcs_pin_dbg_show(struct pinctrl_dev *pctldev,
> > struct seq_file *s,
> > unsigned offset)
> > {
> > - seq_printf(s, " " DRIVER_NAME);
> > + struct pcs_device *pcs;
> > + unsigned val;
> > +
> > + pcs = pinctrl_dev_get_drvdata(pctldev);
> > +
> > + val = pcs->read(pcs->base + offset);
> > + val &= pcs->fmask;
> > +
> > + seq_printf(s, "%08x %s " , val, DRIVER_NAME);
> > }
> >
> > static void pcs_dt_free_map(struct pinctrl_dev *pctldev,
>
> Much better already:
>
> root@bone-mainline:/sys/kernel/debug/pinctrl/44e10800.pinmux# grep 8a0 pins
> pin 40 (44e108a0) 00000027 pinctrl-single
Cool :) For the proper patch feel free to add:
Acked-by: Tony Lindgren <tony@xxxxxxxxxxx>
> Now I can write a userspace tool do list the current muxes without resorting to devmem2!
Yeah maybe add support to omapconf for that? I can generate
the data for balls etc from old omap mux if you let me know the
format you need.
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
