On 09/19/2012 07:07 PM, Pantelis Antoniou wrote: > Add support for pinctrl mux settings in the OMAP I2C driver. > If no such pinctl bindings are found a warning message is printed. > > Signed-off-by: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx> > --- > drivers/i2c/busses/i2c-omap.c | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c > index b149e32..f722478 100644 > --- a/drivers/i2c/busses/i2c-omap.c > +++ b/drivers/i2c/busses/i2c-omap.c > @@ -43,6 +43,8 @@ > #include <linux/slab.h> > #include <linux/i2c-omap.h> > #include <linux/pm_runtime.h> > +#include <linux/pinctrl/consumer.h> > +#include <linux/err.h> > > /* I2C controller revisions */ > #define OMAP_I2C_OMAP1_REV_2 0x20 > @@ -1057,6 +1059,7 @@ omap_i2c_probe(struct platform_device *pdev) > const struct of_device_id *match; > int irq; > int r; > + struct pinctrl *pinctrl; > > /* NOTE: driver uses the static register mapping */ > mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); > @@ -1197,6 +1200,10 @@ omap_i2c_probe(struct platform_device *pdev) > > of_i2c_register_devices(adap); > > + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); > + if (IS_ERR(pinctrl)) > + dev_warn(dev->dev, "pins are not configured from the driver\n"); Can you use &pdev->dev for the dev_warn() here? the dev->dev is quite confusing especially since you used &pdev->dev for the pinctrl call. > + > pm_runtime_mark_last_busy(dev->dev); > pm_runtime_put_autosuspend(dev->dev); > > -- Péter -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
