Hi Benoit, On Sep 18, 2012, at 10:24 PM, a0919096 wrote: > Hi Panto, > > That patch is good, but a similar one was already posted by Florian. > https://patchwork.kernel.org/patch/1392671/ > > Checking the email thread it seems that Wolfram pulled it. > > Regards, > Benoit > Great. One less thing to look after :) Regards -- Pantelis > On 9/19/2012 11:07 AM, Pantelis Antoniou wrote: >> The message spit out when the i2c-omap driver load is printing >> the platform device's id as a bus number. However when booting >> from OF id is -1, which is not so nice. >> >> Fix it by printing the adapter number. >> >> [ 0.210467] omap_i2c 44e0b000.i2c: bus -1 rev2.4.0 at 400 kHz >> vs >> [ 0.210467] omap_i2c 44e0b000.i2c: bus 0 rev2.4.0 at 400 kHz >> >> Signed-off-by: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx> >> --- >> drivers/i2c/busses/i2c-omap.c | 6 +++--- >> 1 file changed, 3 insertions(+), 3 deletions(-) >> >> diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c >> index f722478..87bb705 100644 >> --- a/drivers/i2c/busses/i2c-omap.c >> +++ b/drivers/i2c/busses/i2c-omap.c >> @@ -1178,9 +1178,6 @@ omap_i2c_probe(struct platform_device *pdev) >> goto err_unuse_clocks; >> } >> >> - dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", pdev->id, >> - dev->dtrev, dev->rev >> 4, dev->rev & 0xf, dev->speed); >> - >> adap = &dev->adapter; >> i2c_set_adapdata(adap, dev); >> adap->owner = THIS_MODULE; >> @@ -1204,6 +1201,9 @@ omap_i2c_probe(struct platform_device *pdev) >> if (IS_ERR(pinctrl)) >> dev_warn(dev->dev, "pins are not configured from the driver\n"); >> >> + dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", adap->nr, >> + dev->dtrev, dev->rev >> 4, dev->rev & 0xf, dev->speed); >> + >> pm_runtime_mark_last_busy(dev->dev); >> pm_runtime_put_autosuspend(dev->dev); >> >> > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
