The message spit out when the i2c-omap driver load is printing the platform device's id as a bus number. However when booting from OF id is -1, which is not so nice. Fix it by printing the adapter number. [ 0.210467] omap_i2c 44e0b000.i2c: bus -1 rev2.4.0 at 400 kHz vs [ 0.210467] omap_i2c 44e0b000.i2c: bus 0 rev2.4.0 at 400 kHz Signed-off-by: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx> --- drivers/i2c/busses/i2c-omap.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index f722478..87bb705 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1178,9 +1178,6 @@ omap_i2c_probe(struct platform_device *pdev) goto err_unuse_clocks; } - dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", pdev->id, - dev->dtrev, dev->rev >> 4, dev->rev & 0xf, dev->speed); - adap = &dev->adapter; i2c_set_adapdata(adap, dev); adap->owner = THIS_MODULE; @@ -1204,6 +1201,9 @@ omap_i2c_probe(struct platform_device *pdev) if (IS_ERR(pinctrl)) dev_warn(dev->dev, "pins are not configured from the driver\n"); + dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", adap->nr, + dev->dtrev, dev->rev >> 4, dev->rev & 0xf, dev->speed); + pm_runtime_mark_last_busy(dev->dev); pm_runtime_put_autosuspend(dev->dev); -- 1.7.12 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
