I'm using a BeagleBone, and the linux kernel from Koen Kooi (https://github.com/koenkooi/linux.git). I have noticed there is a 0.5sec delay between OMAP UART0 being initialised and the console being enabled. I'll dig a bit deeper, but can anyone shed light on what the delay is ? Can this delay be removed ? My total boot time is only 1.3sec, so a 0.5sec delay is quite significant !?! Below is the first portion of my boot log. Thanks for any advice Mark JACKSON --- [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.28+ (mpfj@mpfj-nanobone) (gcc version 4.5.4 (Buildroot 2012.08-git-00388-g7019407) ) #20 Thu Sep 13 16:56:56 BST 2012 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: am335xevm [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] AM335X ES1.0 (sgx neon ) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/mmcblk0p2 ro rootfstype=ext2 rootwait ip=none [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 256MB = 256MB total [ 0.000000] Memory: 253868k/253868k available, 8276k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] modules : 0xbf800000 - 0xc0000000 ( 8 MB) [ 0.000000] .text : 0xc0008000 - 0xc04ddadc (4951 kB) [ 0.000000] .init : 0xc04de000 - 0xc0517000 ( 228 kB) [ 0.000000] .data : 0xc0518000 - 0xc056e3a8 ( 345 kB) [ 0.000000] .bss : 0xc056e3cc - 0xc05d8a54 ( 426 kB) [ 0.000000] NR_IRQS:410 nr_irqs:410 410 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] Total of 128 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: GPTIMER2 at 24000000 Hz [ 0.000000] OMAP clocksource: GPTIMER1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000183] Calibrating delay loop... 498.89 BogoMIPS (lpj=2494464) [ 0.058166] pid_max: default: 32768 minimum: 301 [ 0.058319] Security Framework initialized [ 0.058410] Mount-cache hash table entries: 512 [ 0.058837] Initializing cgroup subsys cpuacct [ 0.058898] Initializing cgroup subsys devices [ 0.058898] Initializing cgroup subsys freezer [ 0.058990] CPU: Testing write buffer coherency: ok [ 0.060180] devtmpfs: initialized [ 0.080780] omap_hwmod: gfx: failed to hardreset [ 0.097503] omap_hwmod: pruss: failed to hardreset [ 0.098114] print_constraints: dummy: [ 0.098419] NET: Registered protocol family 16 [ 0.099731] OMAP GPIO hardware version 0.1 [ 0.101043] omap_mux_init: Add partition: #1: core, flags: 0 [ 0.102661] omap_i2c.1: alias fck already exists [ 0.103057] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.103240] omap2_mcspi.1: alias fck already exists [ 0.103393] omap2_mcspi.2: alias fck already exists [ 0.103607] edma.0: alias fck already exists [ 0.103637] edma.0: alias fck already exists [ 0.103668] edma.0: alias fck already exists [ 0.103759] cape: pcm register [ 0.114685] bio: create slab <bio-0> at 0 [ 0.116027] SCSI subsystem initialized [ 0.117004] usbcore: registered new interface driver usbfs [ 0.117156] usbcore: registered new interface driver hub [ 0.117340] usbcore: registered new device driver usb [ 0.117523] musb-ti81xx musb-ti81xx: musb0, board_mode=0x13, plat_mode=0x3 [ 0.117675] musb-ti81xx musb-ti81xx: musb1, board_mode=0x13, plat_mode=0x1 [ 0.118316] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 100 kHz [ 0.119598] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.120239] Switching to clocksource gp timer [ 0.148681] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) [ 0.148895] musb-hdrc musb-hdrc.0: dma type: pio [ 0.149078] MUSB0 controller's USBSS revision = 4ea20800 [ 0.149627] musb-hdrc musb-hdrc.0: USB OTG mode controller at d081c000 using PIO, IRQ 18 [ 0.149932] musb-hdrc musb-hdrc.1: dma type: pio [ 0.150115] MUSB1 controller's USBSS revision = 4ea20800 [ 0.150268] musb-hdrc musb-hdrc.1: MUSB HDRC host driver [ 0.150451] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 [ 0.150604] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.150634] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.150665] usb usb1: Product: MUSB HDRC host driver [ 0.150665] usb usb1: Manufacturer: Linux 3.2.28+ musb-hcd [ 0.150695] usb usb1: SerialNumber: musb-hdrc.1 [ 0.151519] hub 1-0:1.0: USB hub found [ 0.151550] hub 1-0:1.0: 1 port detected [ 0.152099] musb-hdrc musb-hdrc.1: USB Host mode controller at d081e800 using PIO, IRQ 19 [ 0.152557] NET: Registered protocol family 2 [ 0.152801] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.153289] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.153503] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 0.153656] TCP: Hash tables configured (established 8192 bind 8192) [ 0.153656] TCP reno registered [ 0.153686] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.153717] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.154052] NET: Registered protocol family 1 [ 0.154449] RPC: Registered named UNIX socket transport module. [ 0.154479] RPC: Registered udp transport module. [ 0.154479] RPC: Registered tcp transport module. [ 0.154510] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.156555] audit: initializing netlink socket (disabled) [ 0.156616] type=2000 audit(0.150:1): initialized [ 0.158172] VFS: Disk quotas dquot_6.5.2 [ 0.158264] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.159545] msgmni has been set to 495 [ 0.161010] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.161041] io scheduler noop registered [ 0.161071] io scheduler deadline registered [ 0.161132] io scheduler cfq registered (default) [ 0.162231] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.163848] omap_uart.0: ttyO0 at MMIO 0x44e09000 (irq = 72) is a OMAP UART0 [ 0.757232] console [ttyO0] enabled [ 0.761535] omap_uart.1: ttyO1 at MMIO 0x48022000 (irq = 73) is a OMAP UART1 [ 0.769409] omap_uart.2: ttyO2 at MMIO 0x48024000 (irq = 74) is a OMAP UART2 [ 0.777282] omap_uart.3: ttyO3 at MMIO 0x481a6000 (irq = 44) is a OMAP UART3 [ 0.785156] omap_uart.4: ttyO4 at MMIO 0x481a8000 (irq = 45) is a OMAP UART4 [ 0.792999] omap_uart.5: ttyO5 at MMIO 0x481aa000 (irq = 46) is a OMAP UART5 ... -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
