Add device tree properties for twl4030/gpio, according to the
platform data of corresponding boards. This enables the led
connected to LEDB output for both boards, as well as
pullups/pulldowns on GPIO for the BeagleBoard.
Signed-off-by: Florian Vaussard <florian.vaussard@xxxxxxx>
Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Acked-by: Vaibhav Hiremath <hvaibhav@xxxxxx>
---
arch/arm/boot/dts/omap3-beagle.dts | 20 ++++++++++++++++++++
arch/arm/boot/dts/omap3-evm.dts | 13 +++++++++++++
2 files changed, 33 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index cdcb98c..c7256d5 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -17,6 +17,14 @@
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
};
+
+ leds {
+ compatible = "gpio-leds";
+ pmu_stat {
+ label = "beagleboard::pmu_stat";
+ gpios = <&twl_gpio 19 0>; /* LEDB */
+ };
+ };
};
&i2c1 {
@@ -67,3 +75,15 @@
&mmc3 {
status = "disabled";
};
+
+&twl_gpio {
+ ti,use-leds;
+ /* pullups: BIT(1) */
+ ti,pullups = <0x000002>;
+ /*
+ * pulldowns:
+ * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
+ * BIT(15), BIT(16), BIT(17)
+ */
+ ti,pulldowns = <0x03a1c4>;
+};
diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
index f349ee9..e8ba1c2 100644
--- a/arch/arm/boot/dts/omap3-evm.dts
+++ b/arch/arm/boot/dts/omap3-evm.dts
@@ -17,6 +17,15 @@
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
+
+ leds {
+ compatible = "gpio-leds";
+ ledb {
+ label = "omap3evm::ledb";
+ gpios = <&twl_gpio 19 0>; /* LEDB */
+ linux,default-trigger = "default-on";
+ };
+ };
};
&i2c1 {
@@ -46,3 +55,7 @@
reg = <0x5c>;
};
};
+
+&twl_gpio {
+ ti,use-leds;
+};
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
