On Mon, Sep 03, 2012 at 19:58:09, Cousson, Benoit wrote: > + Vaibhav for the omap3-evm > Reviewing and testing it now... Thanks, Vaibhav > Hi Florian, > > On 09/03/2012 03:54 PM, Florian Vaussard wrote: > > A number of platform data are missing when using twl4030/gpio from a > > device tree. > > Yeah, I know, I was too lazy when I did the DT conversion at that time :-) > > Many thanks for completing the work. > > > This patchset adds the missing properties, updates > > existing device trees and updates the documentation of bindings. > > It mainly enables LEDA and LEDB outputs, as well as pullups / > > pulldowns on GPIOs. > > > > The 1st patch changes the device driver. > > The 2nd patch updates the device trees for BeagleBoard and omap3-evm. > > The 3rd patch updates the documentation of bindings. > > OK, that's a nit, but in general, you'd better introduce the binding > before using it. > > The binding documentation could/should be updated along with the driver > change that does introduce the binding. You could just merged patch #1 > and #3. > > > Tested: > > - Boot tested on Gumstix Overo for "ti,use-leds". Corresponding > > patch is not provided, as the device tree is not yet merged. > > The support can be found in the git tree [1], branch > > omap3-devel-dt-overo. > > - Device trees for BeagleBoard and omap3-evm were compiled, but not > > tested on hardware. > > > > Would someone be willing to test on BeagleBoard / omap3-evm? > > I'll try to do it on Beagle. This is the least I can do since I did not > do the job myself :-) > > I added vaibhav as well since I do not have any omap3-evm board. > > > > > Regards, > > Florian > > > > [1] https://github.com/vaussard/linux.git (not safe for merge) > > > > > > Florian Vaussard (3): > > gpio-twl4030: get platform data from device tree > > gpio-twl4030: new dt properties for BeagleBoard and omap3-EVM > > Nit #2: the DTS file does not belong to the gpio subsystem. So you > should prefix them using the *convention* for ARM DTS patches: > > arm/dts: omap3: Add gpio-twl4030 properties for BeagleBoard and omap3-EVM > > Or maybe "ARM: dts: " because it looks like most people are using that > nowadays. > > The convention for the gpio directory is similar: > gpio/twl4030: get platform data from device tree > > > gpio-twl4030: updates the bindings for new dt properties > > > > .../devicetree/bindings/gpio/gpio-twl4030.txt | 6 ++ > > arch/arm/boot/dts/omap3-beagle.dts | 20 +++++ > > arch/arm/boot/dts/omap3-evm.dts | 13 +++ > > drivers/gpio/gpio-twl4030.c | 86 +++++++++++++------ > > 4 files changed, 98 insertions(+), 27 deletions(-) > > Thanks, > Benoit > > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
