On Friday 31 August 2012 12:45 PM, Tomi Valkeinen wrote:
On Fri, 2012-08-31 at 11:53 +0530, Archit Taneja wrote:
The only little problem was that during bootup, when hwmods are setup,
only the 'parent' hwmod was able to get reset properly, all the other
'child' hwmods don't have modulemode bits tied to them, and hence
weren't able to reset. So we got some error prints.
Once DSS driver kicks in, the driver ensures the parent is enabled for
any child to be enabled, so we don't face the issue again.
So, if DSS driver is not built in, and if the bootloader left DSS in a
bad state, the DSS clocks might remain messed up all the time since
hwmod fwk wasn't able to reset them.
I think this is why we didn't proceed with remove "dss_fck" as a slave
clock. If this issue is minor, we could go ahead and remove it.
I wonder if we could handle this with a custom reset function. We
already have a reset func for dss core. If I remember right, the main
point for that is the fact that omap4 doesn't have a softreset for dss
core, so we manually write the default values to registers.
For omap2/3 this would be simple: skip the resets for all other dss
submodules, and dss core's reset would enable all the clocks and set the
softreset bit. This would reset all the submodules also.
Omap4 is more tricky. I guess we'd need to enable all the clocks, clear
manually dss core's registers, and then set softreset bits in all the
submodules. So in this case dss core would need to have information
about the other submodules.
The is a good idea. I don't clearly understand your approach though. Are
you saying we have a custom reset function for only dss core? And reset
the submodules in it manually?
An alternative approach would be to implement custom reset functions for
each submodule(or each hwmod), and in the beginning of every reset
function, add a hack to enable MODULEMODE bits(since we don't want hwmod
fwk to touch MODULEMODE for the DSS submodules), and then set the soft
reset bits.
Your approach would ensure that we get a clean reset of DSS, but it
would still give the annoying prints when each of the submodule tries to
reset itself.
Archit
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
