Remove the feature to configure the CLKR/FSR mux on McBSP port with 6pin
configuration.
When moving to devicetree these callback can no longer be used in a clean
way anymore.
If a board require to change the 6pin port to work in 4pin setup it needs
to set up the mux in the board file.
For OMAP2/3:
u32 devconf0;
/* McBSP1 CLKR/FSR signal to be connected to CLKX/FSX pin */
devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
devconf0 |= OMAP2_MCBSP1_CLKR_MASK | OMAP2_MCBSP1_FSR_MASK;
omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0);
For OMAP4:
u32 mcbsp_pad;
/* McBSP4 CLKR/FSR signal to be connected to CLKX/FSX pin */
mcbsp_pad = omap4_ctrl_pad_readl(OMAP2_CONTROL_DEVCONF0);
mcbsp_pad |= ((1 << 31) | (1 << 30));
omap4_ctrl_pad_writel(mcbsp_pad, OMAP2_CONTROL_DEVCONF0);
In case when the kernel is booted with DT blob the pinctrl-single will be
provided as soon as it is enabled on the platform.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
---
arch/arm/mach-omap2/mcbsp.c | 77 -------------------------------
arch/arm/plat-omap/include/plat/mcbsp.h | 1 -
sound/soc/omap/mcbsp.c | 31 ------------
sound/soc/omap/mcbsp.h | 3 -
sound/soc/omap/omap-mcbsp.c | 32 +------------
sound/soc/omap/omap-mcbsp.h | 4 --
6 files changed, 3 insertions(+), 145 deletions(-)
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 43899b6..d57a357 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -26,8 +26,6 @@
#include <plat/omap_device.h>
#include <linux/pm_runtime.h>
-#include "control.h"
-
/*
* FIXME: Find a mechanism to enable/disable runtime the McBSP ICLK autoidle.
* Sidetone needs non-gated ICLK and sidetone autoidle is broken.
@@ -35,73 +33,6 @@
#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
-/* McBSP1 internal signal muxing function for OMAP2/3 */
-static int omap2_mcbsp1_mux_rx_clk(struct device *dev, const char *signal,
- const char *src)
-{
- u32 v;
-
- v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-
- if (!strcmp(signal, "clkr")) {
- if (!strcmp(src, "clkr"))
- v &= ~OMAP2_MCBSP1_CLKR_MASK;
- else if (!strcmp(src, "clkx"))
- v |= OMAP2_MCBSP1_CLKR_MASK;
- else
- return -EINVAL;
- } else if (!strcmp(signal, "fsr")) {
- if (!strcmp(src, "fsr"))
- v &= ~OMAP2_MCBSP1_FSR_MASK;
- else if (!strcmp(src, "fsx"))
- v |= OMAP2_MCBSP1_FSR_MASK;
- else
- return -EINVAL;
- } else {
- return -EINVAL;
- }
-
- omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
-
- return 0;
-}
-
-/* McBSP4 internal signal muxing function for OMAP4 */
-#define OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX (1 << 31)
-#define OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX (1 << 30)
-static int omap4_mcbsp4_mux_rx_clk(struct device *dev, const char *signal,
- const char *src)
-{
- u32 v;
-
- /*
- * In CONTROL_MCBSPLP register only bit 30 (CLKR mux), and bit 31 (FSR
- * mux) is used */
- v = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP);
-
- if (!strcmp(signal, "clkr")) {
- if (!strcmp(src, "clkr"))
- v &= ~OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX;
- else if (!strcmp(src, "clkx"))
- v |= OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX;
- else
- return -EINVAL;
- } else if (!strcmp(signal, "fsr")) {
- if (!strcmp(src, "fsr"))
- v &= ~OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX;
- else if (!strcmp(src, "fsx"))
- v |= OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX;
- else
- return -EINVAL;
- } else {
- return -EINVAL;
- }
-
- omap4_ctrl_pad_writel(v, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP);
-
- return 0;
-}
-
static int omap3_enable_st_clock(unsigned int id, bool enable)
{
unsigned int w;
@@ -144,14 +75,6 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
pdata->has_ccr = true;
}
- /* On OMAP2/3 the McBSP1 port has 6 pin configuration */
- if (id == 1 && oh->class->rev < MCBSP_CONFIG_TYPE4)
- pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
-
- /* On OMAP4 the McBSP4 port has 6 pin configuration */
- if (id == 4 && oh->class->rev == MCBSP_CONFIG_TYPE4)
- pdata->mux_signal = omap4_mcbsp4_mux_rx_clk;
-
if (oh->class->rev == MCBSP_CONFIG_TYPE2) {
/* The FIFO has 128 locations */
pdata->buffer_size = 0x80;
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
index 0a7d5ca..c78d90b 100644
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -47,7 +47,6 @@ struct omap_mcbsp_platform_data {
bool has_wakeup; /* Wakeup capability */
bool has_ccr; /* Transceiver has configuration control registers */
int (*enable_st_clock)(unsigned int, bool);
- int (*mux_signal)(struct device *dev, const char *signal, const char *src);
};
/**
diff --git a/sound/soc/omap/mcbsp.c b/sound/soc/omap/mcbsp.c
index d901fc0..c870023 100644
--- a/sound/soc/omap/mcbsp.c
+++ b/sound/soc/omap/mcbsp.c
@@ -762,37 +762,6 @@ int omap2_mcbsp_set_clks_src(struct omap_mcbsp *mcbsp, u8 fck_src_id)
}
-int omap_mcbsp_6pin_src_mux(struct omap_mcbsp *mcbsp, u8 mux)
-{
- const char *signal, *src;
-
- if (!mcbsp->pdata->mux_signal)
- return -EINVAL;
-
- switch (mux) {
- case CLKR_SRC_CLKR:
- signal = "clkr";
- src = "clkr";
- break;
- case CLKR_SRC_CLKX:
- signal = "clkr";
- src = "clkx";
- break;
- case FSR_SRC_FSR:
- signal = "fsr";
- src = "fsr";
- break;
- case FSR_SRC_FSX:
- signal = "fsr";
- src = "fsx";
- break;
- default:
- return -EINVAL;
- }
-
- return mcbsp->pdata->mux_signal(mcbsp->dev, signal, src);
-}
-
#define max_thres(m) (mcbsp->pdata->buffer_size)
#define valid_threshold(m, val) ((val) <= max_thres(m))
#define THRESHOLD_PROP_BUILDER(prop) \
diff --git a/sound/soc/omap/mcbsp.h b/sound/soc/omap/mcbsp.h
index 262a615..49a6725 100644
--- a/sound/soc/omap/mcbsp.h
+++ b/sound/soc/omap/mcbsp.h
@@ -334,9 +334,6 @@ void omap_mcbsp_stop(struct omap_mcbsp *mcbsp, int tx, int rx);
/* McBSP functional clock source changing function */
int omap2_mcbsp_set_clks_src(struct omap_mcbsp *mcbsp, u8 fck_src_id);
-/* McBSP signal muxing API */
-int omap_mcbsp_6pin_src_mux(struct omap_mcbsp *mcbsp, u8 mux);
-
/* Sidetone specific API */
int omap_st_set_chgain(struct omap_mcbsp *mcbsp, int channel, s16 chgain);
int omap_st_get_chgain(struct omap_mcbsp *mcbsp, int channel, s16 *chgain);
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index 1046083..5061594 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -516,21 +516,9 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
return -EBUSY;
}
- if (clk_id == OMAP_MCBSP_SYSCLK_CLK ||
- clk_id == OMAP_MCBSP_SYSCLK_CLKS_FCLK ||
- clk_id == OMAP_MCBSP_SYSCLK_CLKS_EXT ||
- clk_id == OMAP_MCBSP_SYSCLK_CLKX_EXT ||
- clk_id == OMAP_MCBSP_SYSCLK_CLKR_EXT) {
- mcbsp->in_freq = freq;
- regs->srgr2 &= ~CLKSM;
- regs->pcr0 &= ~SCLKME;
- } else if (cpu_class_is_omap1()) {
- /*
- * McBSP CLKR/FSR signal muxing functions are only available on
- * OMAP2 or newer versions
- */
- return -EINVAL;
- }
+ mcbsp->in_freq = freq;
+ regs->srgr2 &= ~CLKSM;
+ regs->pcr0 &= ~SCLKME;
switch (clk_id) {
case OMAP_MCBSP_SYSCLK_CLK:
@@ -558,20 +546,6 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
case OMAP_MCBSP_SYSCLK_CLKR_EXT:
regs->pcr0 |= SCLKME;
break;
-
-
- case OMAP_MCBSP_CLKR_SRC_CLKR:
- err = omap_mcbsp_6pin_src_mux(mcbsp, CLKR_SRC_CLKR);
- break;
- case OMAP_MCBSP_CLKR_SRC_CLKX:
- err = omap_mcbsp_6pin_src_mux(mcbsp, CLKR_SRC_CLKX);
- break;
- case OMAP_MCBSP_FSR_SRC_FSR:
- err = omap_mcbsp_6pin_src_mux(mcbsp, FSR_SRC_FSR);
- break;
- case OMAP_MCBSP_FSR_SRC_FSX:
- err = omap_mcbsp_6pin_src_mux(mcbsp, FSR_SRC_FSX);
- break;
default:
err = -ENODEV;
}
diff --git a/sound/soc/omap/omap-mcbsp.h b/sound/soc/omap/omap-mcbsp.h
index f877b16..baebcee 100644
--- a/sound/soc/omap/omap-mcbsp.h
+++ b/sound/soc/omap/omap-mcbsp.h
@@ -32,10 +32,6 @@ enum omap_mcbsp_clksrg_clk {
OMAP_MCBSP_SYSCLK_CLK, /* Internal ICLK */
OMAP_MCBSP_SYSCLK_CLKX_EXT, /* External CLKX pin */
OMAP_MCBSP_SYSCLK_CLKR_EXT, /* External CLKR pin */
- OMAP_MCBSP_CLKR_SRC_CLKR, /* CLKR from CLKR pin */
- OMAP_MCBSP_CLKR_SRC_CLKX, /* CLKR from CLKX pin */
- OMAP_MCBSP_FSR_SRC_FSR, /* FSR from FSR pin */
- OMAP_MCBSP_FSR_SRC_FSX, /* FSR from FSX pin */
};
/* McBSP dividers */
--
1.7.8.6
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
