The hdmi driver currently updates only the 'code' member of hdmi_config when
the op omapdss_hdmi_display_set_timing() is called by the hdmi panel driver.
The 'timing' field of hdmi_config is updated only when hdmi_power_on is called.
It makes more sense to configure the whole hdmi_config field in the set_timing
op called by the panel driver. This way, we don't need to call both functions
to ensure that our hdmi_config is configured correctly. Also, we don't need to
calculate hdmi_config during hdmi_power_on, or rely on the omap_video_timings
in the panel's omap_dss_device struct.
A default timing is now configured in hdmi's probe if the panel driver doesn't
set any timing, or doesn't set a valid timing before enabling the panel. Also,
when setting manager timings, use the omap_video_timing calculated by
hdmi_get_timings(), this returns the timings as specified in the CEA/VESA
tables, don't use the one provided by the panel driver directly.
Signed-off-by: Archit Taneja <archit@xxxxxx>
---
drivers/video/omap2/dss/dss.h | 3 ++-
drivers/video/omap2/dss/hdmi.c | 41 +++++++++++++++++-----------------
drivers/video/omap2/dss/hdmi_panel.c | 2 +-
3 files changed, 23 insertions(+), 23 deletions(-)
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 8a9630b..7e38ffd 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -485,7 +485,8 @@ static inline unsigned long hdmi_get_pixel_clock(void)
#endif
int omapdss_hdmi_display_enable(struct omap_dss_device *dssdev);
void omapdss_hdmi_display_disable(struct omap_dss_device *dssdev);
-void omapdss_hdmi_display_set_timing(struct omap_dss_device *dssdev);
+void omapdss_hdmi_display_set_timing(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings);
int omapdss_hdmi_display_check_timing(struct omap_dss_device *dssdev,
struct omap_video_timings *timings);
int omapdss_hdmi_read_edid(u8 *buf, int len);
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 6635b09..01665fa 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -462,7 +462,6 @@ static int hdmi_power_on(struct omap_dss_device *dssdev)
{
const struct omapdss_clock_config *clks;
int r;
- const struct hdmi_config *timing;
struct omap_video_timings *p;
unsigned long phy;
@@ -472,22 +471,10 @@ static int hdmi_power_on(struct omap_dss_device *dssdev)
dss_mgr_disable(dssdev->manager);
- p = &dssdev->panel.timings;
+ p = &hdmi.ip_data.cfg.timings;
- DSSDBG("hdmi_power_on x_res= %d y_res = %d\n",
- dssdev->panel.timings.x_res,
- dssdev->panel.timings.y_res);
+ DSSDBG("hdmi_power_on x_res= %d y_res = %d\n", p->x_res, p->y_res);
- timing = hdmi_get_timings();
- if (timing == NULL) {
- /* HDMI code 4 corresponds to 640 * 480 VGA */
- hdmi.ip_data.cfg.cm.code = 4;
- /* DVI mode 1 corresponds to HDMI 0 to DVI */
- hdmi.ip_data.cfg.cm.mode = HDMI_DVI;
- hdmi.ip_data.cfg = vesa_timings[0];
- } else {
- hdmi.ip_data.cfg = *timing;
- }
phy = p->pixel_clock;
hdmi_compute_pll(phy, &hdmi.ip_data.pll_data);
@@ -525,7 +512,7 @@ static int hdmi_power_on(struct omap_dss_device *dssdev)
dispc_enable_gamma_table(0);
/* tv size */
- dss_mgr_set_timings(dssdev->manager, &dssdev->panel.timings);
+ dss_mgr_set_timings(dssdev->manager, p);
r = hdmi.ip_data.ops->video_enable(&hdmi.ip_data);
if (r)
@@ -571,13 +558,18 @@ int omapdss_hdmi_display_check_timing(struct omap_dss_device *dssdev,
}
-void omapdss_hdmi_display_set_timing(struct omap_dss_device *dssdev)
+void omapdss_hdmi_display_set_timing(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
{
struct hdmi_cm cm;
+ const struct hdmi_config *timing;
+
+ cm = hdmi_get_code(timings);
+ hdmi.ip_data.cfg.cm = cm;
- cm = hdmi_get_code(&dssdev->panel.timings);
- hdmi.ip_data.cfg.cm.code = cm.code;
- hdmi.ip_data.cfg.cm.mode = cm.mode;
+ timing = hdmi_get_timings();
+ if (timing != NULL)
+ hdmi.ip_data.cfg = *timing;
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
int r;
@@ -588,7 +580,7 @@ void omapdss_hdmi_display_set_timing(struct omap_dss_device *dssdev)
if (r)
DSSERR("failed to power on device\n");
} else {
- dss_mgr_set_timings(dssdev->manager, &dssdev->panel.timings);
+ dss_mgr_set_timings(dssdev->manager, &timing->timings);
}
}
@@ -933,6 +925,13 @@ static int __init omapdss_hdmihw_probe(struct platform_device *pdev)
hdmi.ip_data.core_av_offset = HDMI_CORE_AV;
hdmi.ip_data.pll_offset = HDMI_PLLCTRL;
hdmi.ip_data.phy_offset = HDMI_PHY;
+
+ /*
+ * initialize hdmi timings to default value:
+ * HDMI code 4(VGA) and HDMI mode 1(DVI)
+ */
+ hdmi.ip_data.cfg = vesa_timings[0];
+
mutex_init(&hdmi.ip_data.lock);
hdmi_panel_init();
diff --git a/drivers/video/omap2/dss/hdmi_panel.c b/drivers/video/omap2/dss/hdmi_panel.c
index e10844f..8dce206 100644
--- a/drivers/video/omap2/dss/hdmi_panel.c
+++ b/drivers/video/omap2/dss/hdmi_panel.c
@@ -336,8 +336,8 @@ static void hdmi_set_timings(struct omap_dss_device *dssdev,
*/
hdmi_panel_audio_disable(dssdev);
+ omapdss_hdmi_display_set_timing(dssdev, timings);
dssdev->panel.timings = *timings;
- omapdss_hdmi_display_set_timing(dssdev);
mutex_unlock(&hdmi.lock);
}
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
