Hi > > On 17-07-2012 13:13, Ajay Kumar Gupta wrote: > > > > > Added device tree data for usbss on am33xx. There are two musb > > controllers > > > on am33xx platform so have port0_mode and port1_mode additional > data. > > > > > Signed-off-by: Ajay Kumar Gupta <ajay.gupta@xxxxxx> > > > --- > > > arch/arm/boot/dts/am33xx.dtsi | 11 +++++++++++ > > > 1 files changed, 11 insertions(+), 0 deletions(-) > > > > > diff --git a/arch/arm/boot/dts/am33xx.dtsi > > b/arch/arm/boot/dts/am33xx.dtsi > > > index 59509c4..b572803 100644 > > > --- a/arch/arm/boot/dts/am33xx.dtsi > > > +++ b/arch/arm/boot/dts/am33xx.dtsi > > > @@ -154,5 +154,16 @@ > > > #size-cells = <0>; > > > ti,hwmods = "i2c3"; > > > }; > > > + > > > + usb_otg_hs: usb_otg_hs@47400000 { > > > > The "reg" property is absent, so why did you give the node name > the > > address postfix? > > Currently "reg" property is coming from "ti hwmods". I meant base addresses are coming from hwmods and so there is no "reg" property added here. I will update the patch dropping address postfix. Ajay > > > + compatible = "ti,musb-am33xx"; > > > + ti,hwmods = "usb_otg_hs"; > > > + multipoint = <1>; > > > + num_eps = <16>; > > > + ram_bits = <12>; > > > + port0_mode = <3>; > > > + port1_mode = <1>; > > > + power = <250>; > > > + }; > > > > WBR, Sergei > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" > in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html