> On Monday 09 July 2012 04:31 PM, Axel Lin wrote: > > 於 一，2012-07-09 於 11:22 +0800，Axel Lin 提到： > >> In twl6030ldo_set_voltage, current code use below formula to calculate vsel: > >> vsel = (min_uV/1000 - 1000)/100 + 1; > >> This is worng because when min_uV is 1000000 uV, vsel is 1. > >> It should be 0 in this case. > > Why? Do you know of any documentation which states this? I double check with the datasheet again now. You are right in this. So we cannot use linear mapping for twl6030ldo_ops here. I'm going to send a patch to fix it, I'd appreciate if someone can review and test it. > > I found a problem that before commit 3e3d3be79c, the voltage tables were > > not linear mapping. So why we can convert these voltage mapping table to > > Voltage(in mV) = 1000mv + 100mv * (vsel - 1)? > > > > Did I miss something? > > All voltage tables before commit '3e3d3be79c' for twl6030 regulators > were clearly wrong. They assumed similarity with twl4030 regulators > which was not right. Good to know that. Thanks, Axel > > regards, > Rajendra > > > > > Regards, > > Axel > > > > > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
