On 07/14/2012 01:56 AM, Paul Walmsley wrote: > Hi > > On Fri, 13 Jul 2012, Rob Herring wrote: > >> I'm not sure this is really a good use of aliases. UARTs use aliases >> because it is important that the UART number to tty number is known and >> fixed. IIUC, as an example you are picking timer1 because it has >> properties X, Y and Z. If so, then you should describe those h/w >> properties within the timer nodes so you can pick which timer to use >> based on it's h/w properties. > > Some GPTIMER blocks have input and output signals that can be routed to > external package balls. So it's possible that some application may need > to request a specific timer ID, since that timer would be connected to a > specific off-chip device. Yes, I understand that. So you should be describing which ones have i/o and what they are connected to. The PWM binding is probably a starting point. Rob > > > - Paul > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
