Under some circumstances, drivers may leave an omap_device enabled due
to driver programming errors, or due to a failure in the drivers
probe method.
Using the recently added omap_device driver_status field, we can
detect conditions where an omap_device is enabled but has no driver
bound and then ensure that the device is properly idled until it can
be probed again.
The goal of this feature is not only to detect and warn on these error
conditions, but also to ensure that devices are properly put in
low-power states so they do not prevent SoC-wide low-power states.
Cc: Paul Walmsley <paul@xxxxxxxxx>
Signed-off-by: Kevin Hilman <khilman@xxxxxx>
---
arch/arm/plat-omap/omap_device.c | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index 150112e..28ab6af 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -1133,3 +1133,33 @@ static int __init omap_device_init(void)
return 0;
}
core_initcall(omap_device_init);
+
+static int __init omap_device_late_idle(struct device *dev, void *data)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct omap_device *od = to_omap_device(pdev);
+
+ if (!od)
+ return 0;
+
+ /*
+ * If omap_device state is enabled, but has no driver bound,
+ * idle it.
+ */
+ if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) {
+ if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
+ dev_warn(dev, "%s: enabled but no driver. Idling\n",
+ __func__);
+ omap_device_idle(pdev);
+ }
+ }
+
+ return 0;
+}
+
+static int __init omap_device_late_init(void)
+{
+ bus_for_each_dev(&platform_bus_type, NULL, NULL, omap_device_late_idle);
+ return 0;
+}
+late_initcall(omap_device_late_init);
--
1.7.9.2
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
