Hello, On 06/08/2012 04:01 PM, Peter Ujfalusi wrote: > Hello, > > The following series enable the audio functionality on OMAP4 based devices using > twl6040 as audio codec. > > The series adds the needed bindings in the dts for the OMAP IPs, twl6040 MFD > device and for the audio connection on the board. > > To be able to differentiate between PandaBoard and PandaBoardES (they have a bit > different audio configuration) a new dts file has been created which only > changes the audio properties different between the two boards. > > Patches for the drivers involved and the documentation related to dts sections > has been either in 3.5 or heading for 3.6. Probably this series has been overlooked, since I have not received feedback on it. Should I resend the series? Which tree should I use to rebase it? Thank you, Péter > > Regards, > Peter > --- > Peter Ujfalusi (7): > arm/dts: omap4: Add entry for OMAP McPDM IP > arm/dts: omap4: Add entry for OMAP DMIC IP > arm/dts: omap4-sdp: Add fixed regulator to represent VBAT > arm/dts: omap4-sdp: Add support for twl6040 > arm/dts: omap4-sdp: Enable audio support via device tree > arm/dts: omap4-panda: Audio support for PandaBoard 4430 > arm/dts: New dts file for PandaBoardES (4460) > > arch/arm/boot/dts/omap4-panda.dts | 37 +++++++++++++++++++ > arch/arm/boot/dts/omap4-pandaES.dts | 24 ++++++++++++ > arch/arm/boot/dts/omap4-sdp.dts | 68 +++++++++++++++++++++++++++++++++++ > arch/arm/boot/dts/omap4.dtsi | 18 +++++++++ > 4 files changed, 147 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/boot/dts/omap4-pandaES.dts > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html