Hello, The following series enable the audio functionality on OMAP4 based devices using twl6040 as audio codec. The series adds the needed bindings in the dts for the OMAP IPs, twl6040 MFD device and for the audio connection on the board. To be able to differentiate between PandaBoard and PandaBoardES (they have a bit different audio configuration) a new dts file has been created which only changes the audio properties different between the two boards. Patches for the drivers involved and the documentation related to dts sections has been either in 3.5 or heading for 3.6. Regards, Peter --- Peter Ujfalusi (7): arm/dts: omap4: Add entry for OMAP McPDM IP arm/dts: omap4: Add entry for OMAP DMIC IP arm/dts: omap4-sdp: Add fixed regulator to represent VBAT arm/dts: omap4-sdp: Add support for twl6040 arm/dts: omap4-sdp: Enable audio support via device tree arm/dts: omap4-panda: Audio support for PandaBoard 4430 arm/dts: New dts file for PandaBoardES (4460) arch/arm/boot/dts/omap4-panda.dts | 37 +++++++++++++++++++ arch/arm/boot/dts/omap4-pandaES.dts | 24 ++++++++++++ arch/arm/boot/dts/omap4-sdp.dts | 68 +++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/omap4.dtsi | 18 +++++++++ 4 files changed, 147 insertions(+), 0 deletions(-) create mode 100644 arch/arm/boot/dts/omap4-pandaES.dts -- 1.7.8.6 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
