Re: [PATCH 1/2] ARM: OMAP: board-4430sdp: MUX configuration for sys_nirq2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



+ Russell

On Fri, Jul 6, 2012 at 2:52 PM, Peter Ujfalusi <peter.ujfalusi@xxxxxx> wrote:
> On 07/06/2012 11:02 AM, Shilimkar, Santosh wrote:
>> On Fri, Jul 6, 2012 at 2:19 PM, Peter Ujfalusi <peter.ujfalusi@xxxxxx> wrote:
>>> The sys_nirq2 is used for twl6040, make sure the pin is configured
>>> correctly.
>>>
>>> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
>>> ---
>> Should remove the boot-loader pin-muxing dependency.
>> Was this the reason, Audio had some issues on OMAP4430
>> SDP as reported by Russell ?
>
> The boot loader never configured the sys_nirq2, I have sent a patch for u-boot
> to do this, but it is said that the kernel should take care of this.
>
> We did not had jack detection working with upstream u-boot, kernel (I have
> patched u-boot so I have not seen this issue).
> Now if the board is booted without HS connected, upon connecting the HS we
> will recognize it and it should be all fine.
> So yes this was the reason why Russell had issues with audio.
>
Thanks Peter for tracking it down.

Regards
santosh
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux