Re: [PATCH 1/2] ARM: OMAP: board-4430sdp: MUX configuration for sys_nirq2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 07/06/2012 11:02 AM, Shilimkar, Santosh wrote:
> On Fri, Jul 6, 2012 at 2:19 PM, Peter Ujfalusi <peter.ujfalusi@xxxxxx> wrote:
>> The sys_nirq2 is used for twl6040, make sure the pin is configured
>> correctly.
>>
>> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
>> ---
> Should remove the boot-loader pin-muxing dependency.
> Was this the reason, Audio had some issues on OMAP4430
> SDP as reported by Russell ?

The boot loader never configured the sys_nirq2, I have sent a patch for u-boot
to do this, but it is said that the kernel should take care of this.

We did not had jack detection working with upstream u-boot, kernel (I have
patched u-boot so I have not seen this issue).
Now if the board is booted without HS connected, upon connecting the HS we
will recognize it and it should be all fine.
So yes this was the reason why Russell had issues with audio.

-- 
Péter


--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux