Hi Afzal,
On 06/11/2012 09:27 AM, Afzal Mohammed wrote:
> Platform will provide driver with configuration details for
> each CS like configuration, timing, interrupts. Setup GPMC
> based on it. Platform data also provides platform data &
> resources used for connected peripheral (eg. gpio irq).
> GPMC driver tunnels those information to respective driver.
>
> Signed-off-by: Afzal Mohammed <afzal@xxxxxx>
> ---
> arch/arm/mach-omap2/gpmc.c | 146 ++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 146 insertions(+)
>
> diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
> index 9073a8a..281bd23 100644
> --- a/arch/arm/mach-omap2/gpmc.c
> +++ b/arch/arm/mach-omap2/gpmc.c
> @@ -155,6 +155,8 @@ struct gpmc_peripheral {
> struct platform_device *pdev;
> };
>
> +static struct gpmc_peripheral gpmc_peripheral[GPMC_CS_NUM];
> +static unsigned gpmc_num_peripheral;
> static unsigned gpmc_waitpin_map;
>
> static struct gpmc_client_irq gpmc_client_irq[GPMC_NR_IRQ];
> @@ -1235,6 +1237,39 @@ static int gpmc_setup_cs_waitpin(struct gpmc_peripheral *g_per, unsigned cs,
> return 0;
> }
>
> +static int gpmc_setup_cs_config_timing(struct gpmc_peripheral *g_per,
> + struct gpmc_cs_data *cs)
> +{
> + int ret;
> +
> + /* some boards rely on bootloader for configuration */
> + if (cs->have_config) {
> + gpmc_setup_cs_config(cs->cs, cs->config);
> + ret = gpmc_setup_cs_waitpin(g_per, cs->cs, cs->config);
> + if (IS_ERR_VALUE(ret)) {
> + dev_err(gpmc_dev, "error: waitpin on CS %d\n", cs->cs);
> + return ret;
> + }
> + } else
> + gpmc_print_cs_config(cs->cs);
> +
> + /* some boards rely on bootloader for timing */
> + if (cs->time_ctrl.type == has_period) {
> + ret = gpmc_cs_set_timings(cs->cs, &cs->time_ctrl.timings);
> + if (IS_ERR_VALUE(ret)) {
> + dev_err(gpmc_dev, "error: timing on CS: %d\n", cs->cs);
> + return ret;
> + }
> + gpmc_cs_misc_timings(cs->cs, &cs->time_ctrl.bool_timings);
> + } else if (cs->time_ctrl.type == has_clock) {
> + gpmc_cs_set_register_timings(cs->cs, &cs->time_ctrl.timings);
> + gpmc_cs_misc_timings(cs->cs, &cs->time_ctrl.bool_timings);
> + } else
> + gpmc_print_cs_timings(cs->cs);
> +
> + return 0;
> +}
> +
> static inline unsigned gpmc_bit_to_irq(unsigned bitmask)
> {
> return bitmask;
> @@ -1307,10 +1342,100 @@ static int gpmc_setup_waitpin(struct gpmc_peripheral *g_per)
> return 0;
> }
>
> +static __devinit int gpmc_setup_cs(struct gpmc_peripheral *g_per,
> + struct gpmc_cs_data *cs, struct resource *res)
> +{
> + int num, ret;
> +
> + num = gpmc_setup_cs_mem(cs, res);
> + if (IS_ERR_VALUE(num))
> + return num;
> +
> + ret = gpmc_setup_cs_config_timing(g_per, cs);
> + if (IS_ERR_VALUE(ret))
> + return ret;
> +
> + num += gpmc_setup_cs_irq(cs, res + num);
What happens if the above function returns an error?
Jon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
