Select COMMON_CLK for ARCH_OMAP2 and switch over to using new data files for OMAP2/3/4. The older data files which get removed in subsequent patches. Signed-off-by: Rajendra Nayak <rnayak@xxxxxx> --- arch/arm/mach-omap2/Kconfig | 1 + arch/arm/mach-omap2/Makefile | 8 ++++---- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 8141b76..b5b7b76 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -17,6 +17,7 @@ config ARCH_OMAP2PLUS_TYPICAL select MENELAUS if ARCH_OMAP2 select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4 select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4 + select COMMON_CLK help Compile a kernel suitable for booting most boards diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 49f92bc..785b861 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -138,14 +138,14 @@ obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o \ clkt2xxx_virt_prcm_set.o \ clkt2xxx_apll.o clkt2xxx_osc.o \ clkt2xxx_dpll.o clkt_iclk.o -obj-$(CONFIG_SOC_OMAP2420) += clock2420_data.o -obj-$(CONFIG_SOC_OMAP2430) += clock2430.o clock2430_data.o +obj-$(CONFIG_SOC_OMAP2420) += cclock2420_data.o +obj-$(CONFIG_SOC_OMAP2430) += clock2430.o cclock2430_data.o obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o \ clock34xx.o clkt34xx_dpll3m2.o \ clock3517.o clock36xx.o \ - dpll3xxx.o clock3xxx_data.o \ + dpll3xxx.o cclock3xxx_data.o \ clkt_iclk.o -obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o \ +obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) cclock44xx_data.o \ dpll3xxx.o dpll44xx.o # OMAP2 clock rate set data (old "OPP" data) -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
