Hello Santosh, On Mon, May 28, 2012 at 12:48 PM, Felipe Balbi <balbi@xxxxxx> wrote: > Hi, > > On Mon, May 28, 2012 at 03:03:26PM +0530, Shilimkar, Santosh wrote: >> On Fri, May 25, 2012 at 1:56 PM, Eduardo Valentin >> <eduardo.valentin@xxxxxx> wrote: >> > This patch exposes OMAP4 thermal sensor as a thermal zone >> > named "cpu". Only thermal creation is done here. >> > >> > TODO: >> > >> > - Add cooling bindings >> > - Add extrapolation rules >> > >> > Signed-off-by: Eduardo Valentin <eduardo.valentin@xxxxxx> >> > --- >> > drivers/thermal/Kconfig | 12 ++++++ >> > drivers/thermal/Makefile | 1 + >> > drivers/thermal/omap-bandgap.c | 1 + >> > drivers/thermal/omap-bandgap.h | 12 ++++++ >> > drivers/thermal/omap4-thermal.c | 72 +++++++++++++++++++++++++++++++++++++++ >> > 5 files changed, 98 insertions(+), 0 deletions(-) >> > create mode 100644 drivers/thermal/omap4-thermal.c >> > >> > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig >> > index ffdd240..2e82797 100644 >> > --- a/drivers/thermal/Kconfig >> > +++ b/drivers/thermal/Kconfig >> > @@ -39,3 +39,15 @@ config OMAP_BANDGAP >> > This includes alert interrupts generation and also the TSHUT >> > support. >> > >> > +config OMAP4_THERMAL >> > + bool "Texas Instruments OMAP4 thermal support" >> > + depends on OMAP_BANDGAP >> > + depends on ARCH_OMAP4 >> > + help >> > + If you say yes here you get thermal support for the Texas Instruments >> > + OMAP4 SoC family. The current chip supported are: >> > + - OMAP4460 >> > + >> It's more of IP feature than OMAP specific, so something like >> >> config HAVE_BANDGAP_THERMAL_SUPPORT >> >> and then let processor's which support enable it. That OMAP varients >> in AMXX etc if needed can make use of it. > > Those are just an OMAP in disguise. > >> If you agree, then rest of the driver also can be cleaned to avoid >> omap_* in file names and variables. >> >> Apart from this minor comment, rest of the patch looks fine to me. > > Then it will appear as a fully generic bandgap driver, which is not the > case. This is really a TI thing, right ? I have to agree with Felipe here. I do see your point to have a name which is applicable to AMxx, but having such generic naming is not helping either :-( as this bandgap driver is not supposed to be generic. I though of "ti_bandgap.*", but still seams to be misleading.. I guess same applies to usb_phy and scm. Again, if you have a name that fits better I won't hesitate to use it :-) > > -- > balbi -- Eduardo Valentin -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
