From: Jon Hunter <jon-hunter@xxxxxx>
For OMAP3+ devices, the clock domains (CLKDMs) support one or more of the
following transition modes ...
NO_SLEEP (0x0) - A clock domain sleep transition is never initiated,
irrespective of the hardware conditions.
SW_SLEEP (0x1) - A software-forced sleep transition. The transition is initiated
when the associated hardware conditions are satisfied
SW_WKUP (0x2) - A software-forced clock domain wake-up transition is initiated,
irrespective of the hardware conditions.
HW_AUTO (0x3) - Hardware-controlled automatic sleep and wake-up transition is
initiated by the PRCM module when the associated hardware
conditions are satisfied.
For OMAP4 devices, SW_SLEEP is equivalent to HW_AUTO and NO_SLEEP is equivalent
to SW_WKUP. For OMAP4 devices, all CLKDMs support HW_AUTO and therefore we can
place the CLKDMs in the HW_AUTO state instead of the SW_SLEEP mode. Hence, we
do not need to use the SW_SLEEP mode. With regard to NO_SLEEP and SW_WKUP it is
preferred to use SW_WKUP mode if the CLKDM supports it and so use this mode
instead of NO_SLEEP where possible.
For a software perspective the above 4 modes are represented by the following
flags to indicate what modes are supported by each of the CLKDMs.
CLKDM_CAN_DISABLE_AUTO --> NO_SLEEP
CLKDM_CAN_ENABLE_AUTO --> HW_AUTO
CLKDM_CAN_FORCE_SLEEP --> SW_SLEEP
CLKDM_CAN_FORCE_WAKEUP --> SW_WKUP
By eliminating the SW_SLEEP mode the the mapping of the flags for OMAP4 devices
can becomes ...
CLKDM_CAN_DISABLE_AUTO --> NO_SLEEP
CLKDM_CAN_ENABLE_AUTO --> HW_AUTO
CLKDM_CAN_FORCE_SLEEP --> HW_AUTO
CLKDM_CAN_FORCE_WAKEUP --> SW_WKUP
Cc: Ming Lei <ming.lei@xxxxxxxxxxxxx>
Cc: Will Deacon <will.deacon@xxxxxxx>
Cc: Benoit Cousson <b-cousson@xxxxxx>
Cc: Paul Walmsley <paul@xxxxxxxxx>
Cc: Kevin Hilman <khilman@xxxxxx>
Signed-off-by: Jon Hunter <jon-hunter@xxxxxx>
---
arch/arm/mach-omap2/clockdomain44xx.c | 7 +++++--
arch/arm/mach-omap2/cminst44xx.c | 14 --------------
2 files changed, 5 insertions(+), 16 deletions(-)
diff --git a/arch/arm/mach-omap2/clockdomain44xx.c b/arch/arm/mach-omap2/clockdomain44xx.c
index 4f04dd1..99ce556 100644
--- a/arch/arm/mach-omap2/clockdomain44xx.c
+++ b/arch/arm/mach-omap2/clockdomain44xx.c
@@ -70,7 +70,7 @@ static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm)
static int omap4_clkdm_sleep(struct clockdomain *clkdm)
{
- omap4_cminst_clkdm_force_sleep(clkdm->prcm_partition,
+ omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
clkdm->cm_inst, clkdm->clkdm_offs);
return 0;
}
@@ -90,7 +90,10 @@ static void omap4_clkdm_allow_idle(struct clockdomain *clkdm)
static void omap4_clkdm_deny_idle(struct clockdomain *clkdm)
{
- omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition,
+ if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+ omap4_clkdm_wakeup(clkdm);
+ else
+ omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition,
clkdm->cm_inst, clkdm->clkdm_offs);
}
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index bd8810c..a44456c 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -227,20 +227,6 @@ void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs)
}
/**
- * omap4_cminst_clkdm_force_sleep - try to put a clockdomain into idle
- * @part: PRCM partition ID that the clockdomain registers exist in
- * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
- *
- * Put a clockdomain referred to by (@part, @inst, @cdoffs) into idle
- * No return value.
- */
-void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs)
-{
- _clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, part, inst, cdoffs);
-}
-
-/**
* omap4_cminst_clkdm_force_sleep - try to take a clockdomain out of idle
* @part: PRCM partition ID that the clockdomain registers exist in
* @inst: CM instance register offset (*_INST macro)
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
