Hi Tony, On Tue, May 01, 2012 at 17:49:03, Mohammed, Afzal wrote: > GPMC driver conversion patch series. Some peripherals has GPMC helper > functions, these has been modified to cater to the needs of GPMC > driver. All the boards using GPMC has been adapted to use the new > GPMC driver. > > GPMC HWMOD entry for OMAP2/3 has been added. On OMAP3, kernel does > spit "omap_hwmod: gpmc: cannot be enabled for reset (3)", but > peripherals connected via GPMC are working. Really shaky about OMAP2 > GPMC HWMOD entry. Would be helpful if someone can help me in resolving > warning on OMAP3 & verify whether OMAP2 entry is proper. The series > adapts to HWMOD. > > Drivers, NAND & OneNAND of OMAP has been modified to make use of GPMC > changes & cleaned up the now unnecessary exported symbol usages. > > This series has been made on top of, > 5e136da Linux-omap rebuilt: Updated to -rc5, > A patch by Javier Martinez Canillas <javier@xxxxxxxxxxxx>, > OMAP3: igep0020: Add support for Micron NAND Flash storage memory, > has also been incorporated into the series as this was necessary for > igep0020 board. > > This has been tested on omap3 evm (SMSC911x) & beagle board (NAND) Please let me know your comments on this series. Regards Afzal -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
