* Russ Dill <Russ.Dill@xxxxxx> [120507 13:00]: > On Beagleboard-xM (all revisions) only MMC1_DAT0-MMC1_DAT3 are wired up. > Tested on Beagleboard-xM Rev C1 and Beagleboard Rev B4. > > Signed-off-by: Russ Dill <Russ.Dill@xxxxxx> > --- > arch/arm/mach-omap2/board-omap3beagle.c | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c > index 7be8d65..3b9647a 100644 > --- a/arch/arm/mach-omap2/board-omap3beagle.c > +++ b/arch/arm/mach-omap2/board-omap3beagle.c > @@ -523,6 +523,10 @@ static void __init omap3_beagle_init(void) > > if (beagle_config.mmc1_gpio_wp != -EINVAL) > omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT); > + > + /* All xM versions have 4-bit MMC bus */ > + if (cpu_is_omap3630()) > + mmc[0].caps &= ~MMC_CAP_8_BIT_DATA; > omap_hsmmc_init(mmc); > > omap3_beagle_i2c_init(); This would be better done in omap3_beagle_init_rev as various other things are already initialized there based on the revision. Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
