Re: [PATCH v3 05/10] v4l: Add support for ov5640 sensor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2012/5/2 Sergio Aguirre <saaguirre@xxxxxx>:
> This adds a very limited driver for ov5640, which
> only supports:
>  - 2592x1944 @ ~7.5 fps
>  - 1920x1080 @ ~15 fps,
>  - 1280x720 @ ~24 fps,
>  - 640x480 @ ~24 fps,
>  - 320x240 @ ~24 fps,
>
> All in YUV422i format, using 1 CSI2 datalane @ 333 MHz.
>

There is already a limited driver in mainline for ov5642.
How does the 5642 differ from 5640 ?
Can a single driver handle both chip ?


> Signed-off-by: Sergio Aguirre <saaguirre@xxxxxx>
> ---
>  drivers/media/video/Kconfig  |    6 +
>  drivers/media/video/Makefile |    1 +
>  drivers/media/video/ov5640.c |  948 ++++++++++++++++++++++++++++++++++++++++++
>  include/media/ov5640.h       |   10 +
>  4 files changed, 965 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/media/video/ov5640.c
>  create mode 100644 include/media/ov5640.h
>
> diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
> index 4482ac4..cc76652 100644
> --- a/drivers/media/video/Kconfig
> +++ b/drivers/media/video/Kconfig
> @@ -480,6 +480,12 @@ config VIDEO_OV7670
>          OV7670 VGA camera.  It currently only works with the M88ALP01
>          controller.
>
> +config VIDEO_OV5640
> +       tristate "OmniVision OV5640 sensor support"
> +       depends on I2C && VIDEO_V4L2
> +       help
> +         This is a ov5640 camera driver
> +
>  config VIDEO_VS6624
>        tristate "ST VS6624 sensor support"
>        depends on VIDEO_V4L2 && I2C
> diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
> index c95cc0d..da40ab3 100644
> --- a/drivers/media/video/Makefile
> +++ b/drivers/media/video/Makefile
> @@ -68,6 +68,7 @@ obj-$(CONFIG_VIDEO_CX25840) += cx25840/
>  obj-$(CONFIG_VIDEO_UPD64031A) += upd64031a.o
>  obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o
>  obj-$(CONFIG_VIDEO_OV7670)     += ov7670.o
> +obj-$(CONFIG_VIDEO_OV5640)     += ov5640.o
>  obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o
>  obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o
>  obj-$(CONFIG_VIDEO_MT9M032) += mt9m032.o
> diff --git a/drivers/media/video/ov5640.c b/drivers/media/video/ov5640.c
> new file mode 100644
> index 0000000..2a64d50
> --- /dev/null
> +++ b/drivers/media/video/ov5640.c
> @@ -0,0 +1,948 @@
> +/*
> + * OmniVision OV5640 sensor driver
> + *
> + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether express or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/videodev2.h>
> +#include <linux/slab.h>
> +#include <linux/i2c.h>
> +#include <linux/log2.h>
> +#include <linux/delay.h>
> +#include <linux/module.h>
> +
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-subdev.h>
> +#include <media/v4l2-ctrls.h>
> +
> +#include <media/ov5640.h>
> +
> +/* OV5640 has only one fixed colorspace per pixelcode */
> +struct ov5640_datafmt {
> +       enum v4l2_mbus_pixelcode        code;
> +       enum v4l2_colorspace            colorspace;
> +};
> +
> +struct ov5640_timing_cfg {
> +       u16 x_addr_start;
> +       u16 y_addr_start;
> +       u16 x_addr_end;
> +       u16 y_addr_end;
> +       u16 h_output_size;
> +       u16 v_output_size;
> +       u16 h_total_size;
> +       u16 v_total_size;
> +       u16 isp_h_offset;
> +       u16 isp_v_offset;
> +       u8 h_odd_ss_inc;
> +       u8 h_even_ss_inc;
> +       u8 v_odd_ss_inc;
> +       u8 v_even_ss_inc;
> +};
> +
> +enum ov5640_size {
> +       OV5640_SIZE_QVGA,
> +       OV5640_SIZE_VGA,
> +       OV5640_SIZE_720P,
> +       OV5640_SIZE_1080P,
> +       OV5640_SIZE_5MP,
> +       OV5640_SIZE_LAST,
> +};
> +
> +static const struct v4l2_frmsize_discrete ov5640_frmsizes[OV5640_SIZE_LAST] = {
> +       {  320,  240 },
> +       {  640,  480 },
> +       { 1280,  720 },
> +       { 1920, 1080 },
> +       { 2592, 1944 },
> +};
> +
> +/* Find a frame size in an array */
> +static int ov5640_find_framesize(u32 width, u32 height)
> +{
> +       int i;
> +
> +       for (i = 0; i < OV5640_SIZE_LAST; i++) {
> +               if ((ov5640_frmsizes[i].width >= width) &&
> +                   (ov5640_frmsizes[i].height >= height))
> +                       break;
> +       }
> +
> +       /* If not found, select biggest */
> +       if (i >= OV5640_SIZE_LAST)
> +               i = OV5640_SIZE_LAST - 1;
> +
> +       return i;
> +}
> +
> +struct ov5640 {
> +       struct v4l2_subdev subdev;
> +       struct media_pad pad;
> +       struct v4l2_mbus_framefmt format;
> +
> +       struct v4l2_ctrl_handler ctrl_handler;
> +
> +       const struct ov5640_platform_data *pdata;
> +
> +       struct v4l2_ctrl *pixel_rate;
> +};
> +
> +static inline struct ov5640 *to_ov5640(struct v4l2_subdev *sd)
> +{
> +       return container_of(sd, struct ov5640, subdev);
> +}
> +
> +/**
> + * struct ov5640_reg - ov5640 register format
> + * @reg: 16-bit offset to register
> + * @val: 8/16/32-bit register value
> + * @length: length of the register
> + *
> + * Define a structure for OV5640 register initialization values
> + */
> +struct ov5640_reg {
> +       u16     reg;
> +       u8      val;
> +};
> +
> +/* TODO: Divide this properly */
> +static const struct ov5640_reg configscript_common1[] = {
> +       { 0x3103, 0x03 },
> +       { 0x3017, 0x00 },
> +       { 0x3018, 0x00 },
> +       { 0x3630, 0x2e },
> +       { 0x3632, 0xe2 },
> +       { 0x3633, 0x23 },
> +       { 0x3634, 0x44 },
> +       { 0x3621, 0xe0 },
> +       { 0x3704, 0xa0 },
> +       { 0x3703, 0x5a },
> +       { 0x3715, 0x78 },
> +       { 0x3717, 0x01 },
> +       { 0x370b, 0x60 },
> +       { 0x3705, 0x1a },
> +       { 0x3905, 0x02 },
> +       { 0x3906, 0x10 },
> +       { 0x3901, 0x0a },
> +       { 0x3731, 0x12 },
> +       { 0x3600, 0x04 },
> +       { 0x3601, 0x22 },
> +       { 0x471c, 0x50 },
> +       { 0x3002, 0x1c },
> +       { 0x3006, 0xc3 },
> +       { 0x300e, 0x05 },
> +       { 0x302e, 0x08 },
> +       { 0x3612, 0x4b },
> +       { 0x3618, 0x04 },
> +       { 0x3034, 0x18 },
> +       { 0x3035, 0x11 },
> +       { 0x3036, 0x54 },
> +       { 0x3037, 0x13 },
> +       { 0x3708, 0x21 },
> +       { 0x3709, 0x12 },
> +       { 0x370c, 0x00 },
> +};
> +
> +/* TODO: Divide this properly */
> +static const struct ov5640_reg configscript_common2[] = {
> +       { 0x3a02, 0x01 },
> +       { 0x3a03, 0xec },
> +       { 0x3a08, 0x01 },
> +       { 0x3a09, 0x27 },
> +       { 0x3a0a, 0x00 },
> +       { 0x3a0b, 0xf6 },
> +       { 0x3a0e, 0x06 },
> +       { 0x3a0d, 0x08 },
> +       { 0x3a14, 0x01 },
> +       { 0x3a15, 0xec },
> +       { 0x4001, 0x02 },
> +       { 0x4004, 0x06 },
> +       { 0x460b, 0x37 },
> +       { 0x4750, 0x00 },
> +       { 0x4751, 0x00 },
> +       { 0x4800, 0x24 },
> +       { 0x5a00, 0x08 },
> +       { 0x5a21, 0x00 },
> +       { 0x5a24, 0x00 },
> +       { 0x5000, 0x27 },
> +       { 0x5001, 0x87 },
> +       { 0x3820, 0x40 },
> +       { 0x3821, 0x06 },
> +       { 0x3824, 0x01 },
> +       { 0x5481, 0x08 },
> +       { 0x5482, 0x14 },
> +       { 0x5483, 0x28 },
> +       { 0x5484, 0x51 },
> +       { 0x5485, 0x65 },
> +       { 0x5486, 0x71 },
> +       { 0x5487, 0x7d },
> +       { 0x5488, 0x87 },
> +       { 0x5489, 0x91 },
> +       { 0x548a, 0x9a },
> +       { 0x548b, 0xaa },
> +       { 0x548c, 0xb8 },
> +       { 0x548d, 0xcd },
> +       { 0x548e, 0xdd },
> +       { 0x548f, 0xea },
> +       { 0x5490, 0x1d },
> +       { 0x5381, 0x20 },
> +       { 0x5382, 0x64 },
> +       { 0x5383, 0x08 },
> +       { 0x5384, 0x20 },
> +       { 0x5385, 0x80 },
> +       { 0x5386, 0xa0 },
> +       { 0x5387, 0xa2 },
> +       { 0x5388, 0xa0 },
> +       { 0x5389, 0x02 },
> +       { 0x538a, 0x01 },
> +       { 0x538b, 0x98 },
> +       { 0x5300, 0x08 },
> +       { 0x5301, 0x30 },
> +       { 0x5302, 0x10 },
> +       { 0x5303, 0x00 },
> +       { 0x5304, 0x08 },
> +       { 0x5305, 0x30 },
> +       { 0x5306, 0x08 },
> +       { 0x5307, 0x16 },
> +       { 0x5580, 0x00 },
> +       { 0x5587, 0x00 },
> +       { 0x5588, 0x00 },
> +       { 0x5583, 0x40 },
> +       { 0x5584, 0x10 },
> +       { 0x5589, 0x10 },
> +       { 0x558a, 0x00 },
> +       { 0x558b, 0xf8 },
> +       { 0x3a0f, 0x36 },
> +       { 0x3a10, 0x2e },
> +       { 0x3a1b, 0x38 },
> +       { 0x3a1e, 0x2c },
> +       { 0x3a11, 0x70 },
> +       { 0x3a1f, 0x18 },
> +       { 0x3a18, 0x00 },
> +       { 0x3a19, 0xf8 },
> +       { 0x3003, 0x03 },
> +       { 0x3003, 0x01 },
> +};
> +
> +static const struct ov5640_timing_cfg timing_cfg[OV5640_SIZE_LAST] = {
> +       [OV5640_SIZE_QVGA] = {
> +               .x_addr_start = 0,
> +               .y_addr_start = 0,
> +               .x_addr_end = 2623,
> +               .y_addr_end = 1951,
> +               .h_output_size = 320,
> +               .v_output_size = 240,
> +               .h_total_size = 2844,
> +               .v_total_size = 1968,
> +               .isp_h_offset = 16,
> +               .isp_v_offset = 6,
> +               .h_odd_ss_inc = 1,
> +               .h_even_ss_inc = 1,
> +               .v_odd_ss_inc = 1,
> +               .v_even_ss_inc = 1,
> +       },
> +       [OV5640_SIZE_VGA] = {
> +               .x_addr_start = 0,
> +               .y_addr_start = 0,
> +               .x_addr_end = 2623,
> +               .y_addr_end = 1951,
> +               .h_output_size = 640,
> +               .v_output_size = 480,
> +               .h_total_size = 2844,
> +               .v_total_size = 1968,
> +               .isp_h_offset = 16,
> +               .isp_v_offset = 6,
> +               .h_odd_ss_inc = 1,
> +               .h_even_ss_inc = 1,
> +               .v_odd_ss_inc = 1,
> +               .v_even_ss_inc = 1,
> +       },
> +       [OV5640_SIZE_720P] = {
> +               .x_addr_start = 336,
> +               .y_addr_start = 434,
> +               .x_addr_end = 2287,
> +               .y_addr_end = 1522,
> +               .h_output_size = 1280,
> +               .v_output_size = 720,
> +               .h_total_size = 2500,
> +               .v_total_size = 1120,
> +               .isp_h_offset = 16,
> +               .isp_v_offset = 4,
> +               .h_odd_ss_inc = 1,
> +               .h_even_ss_inc = 1,
> +               .v_odd_ss_inc = 1,
> +               .v_even_ss_inc = 1,
> +       },
> +       [OV5640_SIZE_1080P] = {
> +               .x_addr_start = 336,
> +               .y_addr_start = 434,
> +               .x_addr_end = 2287,
> +               .y_addr_end = 1522,
> +               .h_output_size = 1920,
> +               .v_output_size = 1080,
> +               .h_total_size = 2500,
> +               .v_total_size = 1120,
> +               .isp_h_offset = 16,
> +               .isp_v_offset = 4,
> +               .h_odd_ss_inc = 1,
> +               .h_even_ss_inc = 1,
> +               .v_odd_ss_inc = 1,
> +               .v_even_ss_inc = 1,
> +       },
> +       [OV5640_SIZE_5MP] = {
> +               .x_addr_start = 0,
> +               .y_addr_start = 0,
> +               .x_addr_end = 2623,
> +               .y_addr_end = 1951,
> +               .h_output_size = 2592,
> +               .v_output_size = 1944,
> +               .h_total_size = 2844,
> +               .v_total_size = 1968,
> +               .isp_h_offset = 16,
> +               .isp_v_offset = 6,
> +               .h_odd_ss_inc = 1,
> +               .h_even_ss_inc = 1,
> +               .v_odd_ss_inc = 1,
> +               .v_even_ss_inc = 1,
> +       },
> +};
> +
> +/**
> + * ov5640_reg_read - Read a value from a register in an ov5640 sensor device
> + * @client: i2c driver client structure
> + * @reg: register address / offset
> + * @val: stores the value that gets read
> + *
> + * Read a value from a register in an ov5640 sensor device.
> + * The value is returned in 'val'.
> + * Returns zero if successful, or non-zero otherwise.
> + */
> +static int ov5640_reg_read(struct i2c_client *client, u16 reg, u8 *val)
> +{
> +       int ret;
> +       u8 data[2] = {0};
> +       struct i2c_msg msg = {
> +               .addr   = client->addr,
> +               .flags  = 0,
> +               .len    = 2,
> +               .buf    = data,
> +       };
> +
> +       data[0] = (u8)(reg >> 8);
> +       data[1] = (u8)(reg & 0xff);
> +
> +       ret = i2c_transfer(client->adapter, &msg, 1);
> +       if (ret < 0)
> +               goto err;
> +
> +       msg.flags = I2C_M_RD;
> +       msg.len = 1;
> +       ret = i2c_transfer(client->adapter, &msg, 1);
> +       if (ret < 0)
> +               goto err;
> +
> +       *val = data[0];
> +       return 0;
> +
> +err:
> +       dev_err(&client->dev, "Failed reading register 0x%02x!\n", reg);
> +       return ret;
> +}
> +
> +/**
> + * Write a value to a register in ov5640 sensor device.
> + * @client: i2c driver client structure.
> + * @reg: Address of the register to read value from.
> + * @val: Value to be written to a specific register.
> + * Returns zero if successful, or non-zero otherwise.
> + */
> +static int ov5640_reg_write(struct i2c_client *client, u16 reg, u8 val)
> +{
> +       int ret;
> +       unsigned char data[3] = { (u8)(reg >> 8), (u8)(reg & 0xff), val };
> +       struct i2c_msg msg = {
> +               .addr   = client->addr,
> +               .flags  = 0,
> +               .len    = 3,
> +               .buf    = data,
> +       };
> +
> +       ret = i2c_transfer(client->adapter, &msg, 1);
> +       if (ret < 0) {
> +               dev_err(&client->dev, "Failed writing register 0x%02x!\n", reg);
> +               return ret;
> +       }
> +
> +       return 0;
> +}
> +
> +/**
> + * Initialize a list of ov5640 registers.
> + * The list of registers is terminated by the pair of values
> + * @client: i2c driver client structure.
> + * @reglist[]: List of address of the registers to write data.
> + * Returns zero if successful, or non-zero otherwise.
> + */
> +static int ov5640_reg_writes(struct i2c_client *client,
> +                            const struct ov5640_reg reglist[],
> +                            int size)
> +{
> +       int err = 0, i;
> +
> +       for (i = 0; i < size; i++) {
> +               err = ov5640_reg_write(client, reglist[i].reg,
> +                               reglist[i].val);
> +               if (err)
> +                       return err;
> +       }
> +       return 0;
> +}
> +
> +static int ov5640_reg_set(struct i2c_client *client, u16 reg, u8 val)
> +{
> +       int ret;
> +       u8 tmpval = 0;
> +
> +       ret = ov5640_reg_read(client, reg, &tmpval);
> +       if (ret)
> +               return ret;
> +
> +       return ov5640_reg_write(client, reg, tmpval | val);
> +}
> +
> +static int ov5640_reg_clr(struct i2c_client *client, u16 reg, u8 val)
> +{
> +       int ret;
> +       u8 tmpval = 0;
> +
> +       ret = ov5640_reg_read(client, reg, &tmpval);
> +       if (ret)
> +               return ret;
> +
> +       return ov5640_reg_write(client, reg, tmpval & ~val);
> +}
> +
> +static int ov5640_config_timing(struct v4l2_subdev *sd)
> +{
> +       struct i2c_client *client = v4l2_get_subdevdata(sd);
> +       struct ov5640 *ov5640 = to_ov5640(sd);
> +       int ret, i;
> +
> +       i = ov5640_find_framesize(ov5640->format.width, ov5640->format.height);
> +
> +       ret = ov5640_reg_write(client,
> +                       0x3800,
> +                       (timing_cfg[i].x_addr_start & 0xFF00) >> 8);
> +       if (ret)
> +               return ret;
> +
> +       ret = ov5640_reg_write(client,
> +                       0x3801,
> +                       timing_cfg[i].x_addr_start & 0xFF);
> +       if (ret)
> +               return ret;
> +
> +       ret = ov5640_reg_write(client,
> +                       0x3802,
> +                       (timing_cfg[i].y_addr_start & 0xFF00) >> 8);
> +       if (ret)
> +               return ret;
> +
> +       ret = ov5640_reg_write(client,
> +                       0x3803,
> +                       timing_cfg[i].y_addr_start & 0xFF);
> +       if (ret)
> +               return ret;
> +
> +       ret = ov5640_reg_write(client,
> +                       0x3804,
> +                       (timing_cfg[i].x_addr_end & 0xFF00) >> 8);
> +       if (ret)
> +               return ret;
> +
> +       ret = ov5640_reg_write(client,
> +                       0x3805,
> +                       timing_cfg[i].x_addr_end & 0xFF);
> +       if (ret)
> +               return ret;
> +
> +       ret = ov5640_reg_write(client,
> +                       0x3806,
> +                       (timing_cfg[i].y_addr_end & 0xFF00) >> 8);
> +       if (ret)
> +               return ret;
> +
> +       ret = ov5640_reg_write(client,
> +                       0x3807,
> +                       timing_cfg[i].y_addr_end & 0xFF);
> +       if (ret)
> +               return ret;
> +
> +       ret = ov5640_reg_write(client,
> +                       0x3808,
> +                       (timing_cfg[i].h_output_size & 0xFF00) >> 8);
> +       if (ret)
> +               return ret;
> +
> +       ret = ov5640_reg_write(client,
> +                       0x3809,
> +                       timing_cfg[i].h_output_size & 0xFF);
> +       if (ret)
> +               return ret;
> +
> +       ret = ov5640_reg_write(client,
> +                       0x380A,
> +                       (timing_cfg[i].v_output_size & 0xFF00) >> 8);
> +       if (ret)
> +               return ret;
> +
> +       ret = ov5640_reg_write(client,
> +                       0x380B,
> +                       timing_cfg[i].v_output_size & 0xFF);
> +       if (ret)
> +               return ret;
> +
> +       ret = ov5640_reg_write(client,
> +                       0x380C,
> +                       (timing_cfg[i].h_total_size & 0xFF00) >> 8);
> +       if (ret)
> +               return ret;
> +
> +       ret = ov5640_reg_write(client,
> +                       0x380D,
> +                       timing_cfg[i].h_total_size & 0xFF);
> +       if (ret)
> +               return ret;
> +
> +       ret = ov5640_reg_write(client,
> +                       0x380E,
> +                       (timing_cfg[i].v_total_size & 0xFF00) >> 8);
> +       if (ret)
> +               return ret;
> +
> +       ret = ov5640_reg_write(client,
> +                       0x380F,
> +                       timing_cfg[i].v_total_size & 0xFF);
> +       if (ret)
> +               return ret;
> +
> +       ret = ov5640_reg_write(client,
> +                       0x3810,
> +                       (timing_cfg[i].isp_h_offset & 0xFF00) >> 8);
> +       if (ret)
> +               return ret;
> +
> +       ret = ov5640_reg_write(client,
> +                       0x3811,
> +                       timing_cfg[i].isp_h_offset & 0xFF);
> +       if (ret)
> +               return ret;
> +
> +       ret = ov5640_reg_write(client,
> +                       0x3812,
> +                       (timing_cfg[i].isp_v_offset & 0xFF00) >> 8);
> +       if (ret)
> +               return ret;
> +
> +       ret = ov5640_reg_write(client,
> +                       0x3813,
> +                       timing_cfg[i].isp_v_offset & 0xFF);
> +       if (ret)
> +               return ret;
> +
> +       ret = ov5640_reg_write(client,
> +                       0x3814,
> +                       ((timing_cfg[i].h_odd_ss_inc & 0xF) << 4) |
> +                       (timing_cfg[i].h_even_ss_inc & 0xF));
> +       if (ret)
> +               return ret;
> +
> +       ret = ov5640_reg_write(client,
> +                       0x3815,
> +                       ((timing_cfg[i].v_odd_ss_inc & 0xF) << 4) |
> +                       (timing_cfg[i].v_even_ss_inc & 0xF));
> +
> +       return ret;
> +}
> +
> +static struct v4l2_mbus_framefmt *
> +__ov5640_get_pad_format(struct ov5640 *ov5640, struct v4l2_subdev_fh *fh,
> +                        unsigned int pad, enum v4l2_subdev_format_whence which)
> +{
> +       switch (which) {
> +       case V4L2_SUBDEV_FORMAT_TRY:
> +               return v4l2_subdev_get_try_format(fh, pad);
> +       case V4L2_SUBDEV_FORMAT_ACTIVE:
> +               return &ov5640->format;
> +       default:
> +               return NULL;
> +       }
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * V4L2 subdev internal operations
> + */
> +
> +static int ov5640_s_power(struct v4l2_subdev *sd, int on)
> +{
> +       struct ov5640 *ov5640 = to_ov5640(sd);
> +
> +       return ov5640->pdata->s_power(sd, on);
> +}
> +
> +static struct v4l2_subdev_core_ops ov5640_subdev_core_ops = {
> +       .s_power        = ov5640_s_power,
> +};
> +
> +static int ov5640_g_fmt(struct v4l2_subdev *sd,
> +                       struct v4l2_subdev_fh *fh,
> +                       struct v4l2_subdev_format *format)
> +{
> +       struct ov5640 *ov5640 = to_ov5640(sd);
> +
> +       format->format = *__ov5640_get_pad_format(ov5640, fh, format->pad,
> +                                                  format->which);
> +
> +       return 0;
> +}
> +
> +static int ov5640_s_fmt(struct v4l2_subdev *sd,
> +                       struct v4l2_subdev_fh *fh,
> +                       struct v4l2_subdev_format *format)
> +{
> +       struct ov5640 *ov5640 = to_ov5640(sd);
> +       struct v4l2_mbus_framefmt *__format;
> +
> +       __format = __ov5640_get_pad_format(ov5640, fh, format->pad,
> +                                           format->which);
> +
> +       *__format = format->format;
> +
> +       /* NOTE: This is always true for now, revisit later. */
> +       ov5640->pixel_rate->cur.val64 = 42000000;
> +
> +       return 0;
> +}
> +
> +static int ov5640_enum_fmt(struct v4l2_subdev *subdev,
> +                          struct v4l2_subdev_fh *fh,
> +                          struct v4l2_subdev_mbus_code_enum *code)
> +{
> +       if (code->index >= 2)
> +               return -EINVAL;
> +
> +       switch (code->index) {
> +       case 0:
> +               code->code = V4L2_MBUS_FMT_UYVY8_1X16;
> +               break;
> +       case 1:
> +               code->code = V4L2_MBUS_FMT_YUYV8_1X16;
> +               break;
> +       }
> +       return 0;
> +}
> +
> +static int ov5640_enum_framesizes(struct v4l2_subdev *subdev,
> +                                  struct v4l2_subdev_fh *fh,
> +                                  struct v4l2_subdev_frame_size_enum *fse)
> +{
> +       if ((fse->index >= OV5640_SIZE_LAST) ||
> +           (fse->code != V4L2_MBUS_FMT_UYVY8_1X16 &&
> +            fse->code != V4L2_MBUS_FMT_YUYV8_1X16))
> +               return -EINVAL;
> +
> +       fse->min_width = ov5640_frmsizes[fse->index].width;
> +       fse->max_width = fse->min_width;
> +       fse->min_height = ov5640_frmsizes[fse->index].height;
> +       fse->max_height = fse->min_height;
> +
> +       return 0;
> +}
> +
> +static int ov5640_s_stream(struct v4l2_subdev *sd, int enable)
> +{
> +       struct ov5640 *ov5640 = to_ov5640(sd);
> +       struct i2c_client *client = v4l2_get_subdevdata(sd);
> +       int ret = 0;
> +
> +       if (enable) {
> +               u8 fmtreg = 0, fmtmuxreg = 0;
> +               int i;
> +
> +               switch ((u32)ov5640->format.code) {
> +               case V4L2_MBUS_FMT_UYVY8_1X16:
> +                       fmtreg = 0x32;
> +                       fmtmuxreg = 0;
> +                       break;
> +               case V4L2_MBUS_FMT_YUYV8_1X16:
> +                       fmtreg = 0x30;
> +                       fmtmuxreg = 0;
> +                       break;
> +               default:
> +                       /* This shouldn't happen */
> +                       ret = -EINVAL;
> +                       return ret;
> +               }
> +
> +               ret = ov5640_reg_write(client, 0x4300, fmtreg);
> +               if (ret)
> +                       return ret;
> +
> +               ret = ov5640_reg_write(client, 0x501F, fmtmuxreg);
> +               if (ret)
> +                       return ret;
> +
> +               ret = ov5640_config_timing(sd);
> +               if (ret)
> +                       return ret;
> +
> +               i = ov5640_find_framesize(ov5640->format.width, ov5640->format.height);
> +               if ((i == OV5640_SIZE_QVGA) ||
> +                   (i == OV5640_SIZE_VGA) ||
> +                   (i == OV5640_SIZE_720P)) {
> +                       ret = ov5640_reg_write(client, 0x3108,
> +                                       (i == OV5640_SIZE_720P) ? 0x1 : 0);
> +                       if (ret)
> +                               return ret;
> +                       ret = ov5640_reg_set(client, 0x5001, 0x20);
> +               } else {
> +                       ret = ov5640_reg_clr(client, 0x5001, 0x20);
> +                       if (ret)
> +                               return ret;
> +                       ret = ov5640_reg_write(client, 0x3108, 0x2);
> +               }
> +
> +               ret = ov5640_reg_clr(client, 0x3008, 0x40);
> +               if (ret)
> +                       goto out;
> +       } else {
> +               u8 tmpreg = 0;
> +
> +               ret = ov5640_reg_read(client, 0x3008, &tmpreg);
> +               if (ret)
> +                       goto out;
> +
> +               ret = ov5640_reg_write(client, 0x3008, tmpreg | 0x40);
> +               if (ret)
> +                       goto out;
> +       }
> +
> +out:
> +       return ret;
> +}
> +
> +static struct v4l2_subdev_video_ops ov5640_subdev_video_ops = {
> +       .s_stream       = ov5640_s_stream,
> +};
> +
> +static struct v4l2_subdev_pad_ops ov5640_subdev_pad_ops = {
> +       .enum_mbus_code = ov5640_enum_fmt,
> +       .enum_frame_size = ov5640_enum_framesizes,
> +       .get_fmt = ov5640_g_fmt,
> +       .set_fmt = ov5640_s_fmt,
> +};
> +
> +static int ov5640_g_skip_frames(struct v4l2_subdev *sd, u32 *frames)
> +{
> +       /* Quantity of initial bad frames to skip. Revisit. */
> +       *frames = 3;
> +
> +       return 0;
> +}
> +
> +static struct v4l2_subdev_sensor_ops ov5640_subdev_sensor_ops = {
> +       .g_skip_frames  = ov5640_g_skip_frames,
> +};
> +
> +static struct v4l2_subdev_ops ov5640_subdev_ops = {
> +       .core   = &ov5640_subdev_core_ops,
> +       .video  = &ov5640_subdev_video_ops,
> +       .pad    = &ov5640_subdev_pad_ops,
> +       .sensor = &ov5640_subdev_sensor_ops,
> +};
> +
> +static int ov5640_registered(struct v4l2_subdev *subdev)
> +{
> +       struct i2c_client *client = v4l2_get_subdevdata(subdev);
> +       struct ov5640 *ov5640 = to_ov5640(subdev);
> +       int ret = 0;
> +       u8 revision = 0;
> +
> +       ret = ov5640_s_power(subdev, 1);
> +       if (ret < 0) {
> +               dev_err(&client->dev, "OV5640 power up failed\n");
> +               return ret;
> +       }
> +
> +       ret = ov5640_reg_read(client, 0x302A, &revision);
> +       if (ret) {
> +               dev_err(&client->dev, "Failure to detect OV5640 chip\n");
> +               goto out;
> +       }
> +
> +       revision &= 0xF;
> +
> +       dev_info(&client->dev, "Detected a OV5640 chip, revision %x\n",
> +                revision);
> +
> +       /* SW Reset */
> +       ret = ov5640_reg_set(client, 0x3008, 0x80);
> +       if (ret)
> +               goto out;
> +
> +       msleep(2);
> +
> +       ret = ov5640_reg_clr(client, 0x3008, 0x80);
> +       if (ret)
> +               goto out;
> +
> +       /* SW Powerdown */
> +       ret = ov5640_reg_set(client, 0x3008, 0x40);
> +       if (ret)
> +               goto out;
> +
> +       ret = ov5640_reg_writes(client, configscript_common1,
> +                       ARRAY_SIZE(configscript_common1));
> +       if (ret)
> +               goto out;
> +
> +       ret = ov5640_reg_writes(client, configscript_common2,
> +                       ARRAY_SIZE(configscript_common2));
> +       if (ret)
> +               goto out;
> +
> +       /* Init controls */
> +       ret = v4l2_ctrl_handler_init(&ov5640->ctrl_handler, 1);
> +       if (ret)
> +               goto out;
> +
> +       ov5640->pixel_rate = v4l2_ctrl_new_std(
> +                               &ov5640->ctrl_handler, NULL,
> +                               V4L2_CID_PIXEL_RATE,
> +                               0, 0, 1, 0);
> +
> +       subdev->ctrl_handler = &ov5640->ctrl_handler;
> +out:
> +       ov5640_s_power(subdev, 0);
> +
> +       return ret;
> +}
> +
> +static int ov5640_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh)
> +{
> +       struct v4l2_mbus_framefmt *format;
> +
> +       format = v4l2_subdev_get_try_format(fh, 0);
> +       format->code = V4L2_MBUS_FMT_UYVY8_1X16;
> +       format->width = ov5640_frmsizes[OV5640_SIZE_VGA].width;
> +       format->height = ov5640_frmsizes[OV5640_SIZE_VGA].height;
> +       format->field = V4L2_FIELD_NONE;
> +       format->colorspace = V4L2_COLORSPACE_JPEG;
> +
> +       return 0;
> +}
> +
> +static int ov5640_close(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh)
> +{
> +       return 0;
> +}
> +
> +static struct v4l2_subdev_internal_ops ov5640_subdev_internal_ops = {
> +       .registered = ov5640_registered,
> +       .open = ov5640_open,
> +       .close = ov5640_close,
> +};
> +
> +static int ov5640_probe(struct i2c_client *client,
> +                        const struct i2c_device_id *did)
> +{
> +       struct ov5640 *ov5640;
> +       int ret;
> +
> +       if (!client->dev.platform_data) {
> +               dev_err(&client->dev, "No platform data!!\n");
> +               return -ENODEV;
> +       }
> +
> +       ov5640 = kzalloc(sizeof(*ov5640), GFP_KERNEL);
> +       if (!ov5640)
> +               return -ENOMEM;
> +
> +       ov5640->pdata = client->dev.platform_data;
> +
> +       ov5640->format.code = V4L2_MBUS_FMT_UYVY8_1X16;
> +       ov5640->format.width = ov5640_frmsizes[OV5640_SIZE_VGA].width;
> +       ov5640->format.height = ov5640_frmsizes[OV5640_SIZE_VGA].height;
> +       ov5640->format.field = V4L2_FIELD_NONE;
> +       ov5640->format.colorspace = V4L2_COLORSPACE_JPEG;
> +
> +       v4l2_i2c_subdev_init(&ov5640->subdev, client, &ov5640_subdev_ops);
> +       ov5640->subdev.internal_ops = &ov5640_subdev_internal_ops;
> +       ov5640->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> +       ov5640->subdev.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR;
> +
> +       ov5640->pad.flags = MEDIA_PAD_FL_SOURCE;
> +       ret = media_entity_init(&ov5640->subdev.entity, 1, &ov5640->pad, 0);
> +       if (ret < 0)
> +               goto err_mediainit;
> +
> +       return ret;
> +
> +err_mediainit:
> +       v4l2_device_unregister_subdev(&ov5640->subdev);
> +       kfree(ov5640);
> +       return ret;
> +}
> +
> +static int ov5640_remove(struct i2c_client *client)
> +{
> +       struct v4l2_subdev *subdev = i2c_get_clientdata(client);
> +       struct ov5640 *ov5640 = to_ov5640(subdev);
> +
> +       v4l2_ctrl_handler_free(&ov5640->ctrl_handler);
> +       v4l2_device_unregister_subdev(subdev);
> +       media_entity_cleanup(&subdev->entity);
> +       kfree(ov5640);
> +       return 0;
> +}
> +
> +static const struct i2c_device_id ov5640_id[] = {
> +       { "ov5640", 0 },
> +       { }
> +};
> +MODULE_DEVICE_TABLE(i2c, ov5640_id);
> +
> +static struct i2c_driver ov5640_i2c_driver = {
> +       .driver = {
> +               .name = "ov5640",
> +       },
> +       .probe          = ov5640_probe,
> +       .remove         = ov5640_remove,
> +       .id_table       = ov5640_id,
> +};
> +
> +static int __init ov5640_mod_init(void)
> +{
> +       return i2c_add_driver(&ov5640_i2c_driver);
> +}
> +
> +static void __exit ov5640_mod_exit(void)
> +{
> +       i2c_del_driver(&ov5640_i2c_driver);
> +}
> +
> +module_init(ov5640_mod_init);
> +module_exit(ov5640_mod_exit);
> +
> +MODULE_DESCRIPTION("OmniVision OV5640 Camera driver");
> +MODULE_AUTHOR("Sergio Aguirre <saaguirre@xxxxxx>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/media/ov5640.h b/include/media/ov5640.h
> new file mode 100644
> index 0000000..65625ce
> --- /dev/null
> +++ b/include/media/ov5640.h
> @@ -0,0 +1,10 @@
> +#ifndef _MEDIA_OV5640_H
> +#define _MEDIA_OV5640_H
> +
> +#include <media/v4l2-subdev.h>
> +
> +struct ov5640_platform_data {
> +      int (*s_power)(struct v4l2_subdev *subdev, int on);
> +};
> +
> +#endif
> --
> 1.7.5.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux