On Friday 27 of April 2012 14:09:11 Tarun Kanti DebBarma wrote: > Breaking commit: ab985f0f7c2c0ef90b7c832f0c04f470dda0593d > > Initialization of irqenable, irqstatus registers is the common > operation done in this function for all OMAP platforms, viz. > OMAP1, OMAP2+. The latter _gpio_rmw()'s to irqenable register > was overwriting the correctly programmed OMAP1 value at the > beginning. As a result, even though it worked on OMAP2+ > platforms it was breaking OMAP1 functionality. On close > observation it is found that the first _gpio_rmw() which is > supposedly done to take care of OMAP1 platform is generic enough > and takes care of OMAP2+ platform as well. Therefore remove the > latter _gpio_rmw() to irqenable as they are redundant now. > > Writing to ctrl and debounce_en registers for OMAP2+ platforms > are modified to match the original(pre-cleanup) code where the > registers are initialized with 0. In the cleanup series since > we are using _gpio_rmw(reg, 0, 1), instead of __raw_writel(), > we are just reading and writing the same values to ctrl and > debounce_en. This is not an issue for debounce_en register > because it has 0x0 as the default value. But in the case of > ctrl register the default value is 0x2 (GATINGRATIO = 0x1) > so that we end up writing 0x2 instead of intended 0 value. > Therefore correcting it to _gpio_rmw(reg, l, 0), where > l = 0xffffffff so that registers are initialized to 0. > > Also, changing the sequence and logic of initializing the irqstatus. Hi, Sorry for not responding in 2 days, as I promissed. The reason is that there are still more issues with GPIO on my Amstrad Delta, for example those introduced with commit 384ebe1c2849160d040df3e68634ec506f13d9ff, and I'm still trying to understand and fix them. Than, it's hard for me to provide you with my Tested-by: before I'm confident those other issues are not related. Anyway, and with respect to Kevin's comments, reverting the irqstatus vs. irqenable initialization order doesn't seem to break anything for me, and changes to debounce_en and ctrl register handling seem not relevant to my test machine. Thanks, Janusz -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
