Re: [PATCH 05/12] Add dummy smsc911x regulators to cm-t35.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



* Igor Grinberg <grinberg@xxxxxxxxxxxxxx> [120327 23:36]:
> Hi Tony,
> 
> On 03/27/12 19:28, Tony Lindgren wrote:
> > * Igor Grinberg <grinberg@xxxxxxxxxxxxxx> [120327 08:56]:
> >> Hi Russ,
> >>
> >> This patch works, but can we, please use the attached patch instead?
> > 
> > Hmm what's the difference here? Do you have some real controllable
> > regulator for one of the smsc911x instances?
> 
> Well, the difference here is that those regulators will only be present
> if the smsc911x controllers are present and their initialization is done
> along with the controllers.
> Also, I want to separate the cm-t35 from sb-t35 for future easier
> refactoring of the sb-t35 code so it can be reused also on cm-t3517.
> 
> Only vddvario for smsc911x.0 is controllable - connected to VIO, but
> VIO will never be disabled as it also controls many other devices
> (DRAM is among them), so I prefer it to be dummy and keep it together
> with vdd33a.

OK thanks for the clarification. 

> > Anyways, I take it that you have tested that both smsc911x interfaces
> > work now?
> 
> Yes, both regulators are registered and found by the smsc911x driver.
> There is some kind of problem with the smsc911x.1, but it looks unrelated
> to the patch:

OK good to hear. Regarding the following problem..
 
> smsc911x: Driver version 2008-10-21
> irq 323: nobody cared (try booting with the "irqpoll" option)
> [<c001ae6c>] (unwind_backtrace+0x0/0xfc) from [<c0088960>] (__report_bad_irq+0x28/0xbc)
> [<c0088960>] (__report_bad_irq+0x28/0xbc) from [<c0088bd4>] (note_interrupt+0x1e0/0x230)
> [<c0088bd4>] (note_interrupt+0x1e0/0x230) from [<c0086e48>] (handle_irq_event_percpu+0xb0/0x1a0)
> [<c0086e48>] (handle_irq_event_percpu+0xb0/0x1a0) from [<c0086f74>] (handle_irq_event+0x3c/0x5c)
> [<c0086f74>] (handle_irq_event+0x3c/0x5c) from [<c00895a0>] (handle_level_irq+0x90/0xfc)
> [<c00895a0>] (handle_level_irq+0x90/0xfc) from [<c008699c>] (generic_handle_irq+0x38/0x40)
> [<c008699c>] (generic_handle_irq+0x38/0x40) from [<c02635a0>] (gpio_irq_handler+0x1b0/0x20c)
> [<c02635a0>] (gpio_irq_handler+0x1b0/0x20c) from [<c008699c>] (generic_handle_irq+0x38/0x40)
> [<c008699c>] (generic_handle_irq+0x38/0x40) from [<c0015404>] (handle_IRQ+0x38/0x84)
> [<c0015404>] (handle_IRQ+0x38/0x84) from [<c000865c>] (omap3_intc_handle_irq+0x48/0x4c)
> [<c000865c>] (omap3_intc_handle_irq+0x48/0x4c) from [<c00140c4>] (__irq_svc+0x44/0x78)
> Exception stack(0xcf02de20 to 0xcf02de68)
> de20: cf02c018 cf02c000 00000000 cf02de58 60000013 c06739fc 00000143 c06739fc
> de40: 60000013 00000508 c06739dc 00000000 00022d69 cf02de68 cf02b3c0 c04890fc
> de60: 20000013 ffffffff
> [<c00140c4>] (__irq_svc+0x44/0x78) from [<c04890fc>] (_raw_spin_unlock_irqrestore+0x64/0x68)
> [<c04890fc>] (_raw_spin_unlock_irqrestore+0x64/0x68) from [<c0087d50>] (__setup_irq+0x1b4/0x3d4)
> [<c0087d50>] (__setup_irq+0x1b4/0x3d4) from [<c00881a0>] (request_threaded_irq+0xdc/0x148)
> [<c00881a0>] (request_threaded_irq+0xdc/0x148) from [<c0482954>] (smsc911x_drv_probe+0x350/0x528)
> [<c0482954>] (smsc911x_drv_probe+0x350/0x528) from [<c02d5a8c>] (platform_drv_probe+0x18/0x1c)
> [<c02d5a8c>] (platform_drv_probe+0x18/0x1c) from [<c02d4580>] (really_probe+0x64/0x160)
> [<c02d4580>] (really_probe+0x64/0x160) from [<c02d46c4>] (driver_probe_device+0x48/0x60)
> [<c02d46c4>] (driver_probe_device+0x48/0x60) from [<c02d4770>] (__driver_attach+0x94/0x98)
> [<c02d4770>] (__driver_attach+0x94/0x98) from [<c02d2ffc>] (bus_for_each_dev+0x54/0x80)
> [<c02d2ffc>] (bus_for_each_dev+0x54/0x80) from [<c02d3730>] (bus_add_driver+0xa8/0x2a4)
> [<c02d3730>] (bus_add_driver+0xa8/0x2a4) from [<c02d4d6c>] (driver_register+0x78/0x184)
> [<c02d4d6c>] (driver_register+0x78/0x184) from [<c0008758>] (do_one_initcall+0x34/0x184)
> [<c0008758>] (do_one_initcall+0x34/0x184) from [<c0613248>] (do_basic_setup+0x34/0x40)
> [<c0613248>] (do_basic_setup+0x34/0x40) from [<c06132b8>] (kernel_init+0x64/0xec)
> [<c06132b8>] (kernel_init+0x64/0xec) from [<c00154cc>] (kernel_thread_exit+0x0/0x8)
> handlers:
> [<c032ea98>] smsc911x_irqhandler
> Disabling IRQ #323
> 
> I still haven't had a chance to look into this.
> Does anyone have a clue?

..care to see if you have OMAP_GPIO_IRQ entry for your board? If so, we're
still waiting for the cleanup-fixes branch to get merged that changes
things to use gpio_to_irq() instead.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux