On Friday 02 March 2012 12:25 AM, Tony Lindgren wrote:
We can now remove the setting of GPIO pins with callbacks
as the drivers can access a GPIO offset on a named gpio_chip
directly with gpio_find_by_chip_name().
Cc: Rajendra Nayak<rnayak@xxxxxx>
Signed-off-by: Tony Lindgren<tony@xxxxxxxxxxx>
---
arch/arm/mach-omap2/board-3430sdp.c | 13 ++++---------
arch/arm/mach-omap2/board-cm-t35.c | 8 ++------
arch/arm/mach-omap2/board-devkit8000.c | 7 ++-----
arch/arm/mach-omap2/board-igep0020.c | 8 ++------
arch/arm/mach-omap2/board-omap3beagle.c | 9 +++------
arch/arm/mach-omap2/board-omap3evm.c | 8 ++------
arch/arm/mach-omap2/board-omap3pandora.c | 13 ++++---------
arch/arm/mach-omap2/board-omap3stalker.c | 8 ++------
arch/arm/mach-omap2/board-omap3touchbook.c | 7 ++-----
arch/arm/mach-omap2/board-zoom-peripherals.c | 7 ++-----
10 files changed, 25 insertions(+), 63 deletions(-)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index da75f23..238b95a 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -231,14 +231,16 @@ static struct omap2_hsmmc_info mmc[] = {
* so the SIM card isn't used; else 4 bits.
*/
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+ .gpiochip_cd = "twl4030_gpio",
+ .gpio_cd = 0, /* mmc0_cd offset in twl4030 */
.gpio_wp = 4,
- .deferred = true,
Shouldn't this patch completely get rid of all the 'deferred'
infrastructure that was put in place, including the
omap_hsmmc_late_init() function, since there is no need for it
anymore?
},
[..]
/*
* Most GPIOs are for USB OTG. Some are mostly sent to
* the P2 connector; notably LEDA for the LCD backlight.
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index ace466b..b387264 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -270,19 +270,19 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = {
{
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA,
- .gpio_cd = -EINVAL,
+ .gpiochip_cd = "twl4030_gpio",
+ .gpio_cd = 0, /* mmc0_cd offset in twl4030 */
.gpio_wp = 126,
.ext_clock = 0,
- .deferred = true,
},
{
.mmc = 2,
.caps = MMC_CAP_4_BIT_DATA,
- .gpio_cd = -EINVAL,
+ .gpiochip_cd = "twl4030_gpio",
+ .gpio_cd = 0, /* mmc0_cd offset in twl4030 */
This one should be gpio_cd = 1,
regards,
Rajendra
.gpio_wp = 127,
.ext_clock = 1,
.transceiver = true,
- .deferred = true,
},
{
.mmc = 3,
@@ -299,11 +299,6 @@ static int omap3pandora_twl_gpio_setup(struct device *dev,
{
int ret, gpio_32khz;
- /* gpio + {0,1} is "mmc{0,1}_cd" (input/IRQ) */
- omap3pandora_mmc[0].gpio_cd = gpio + 0;
- omap3pandora_mmc[1].gpio_cd = gpio + 1;
- omap_hsmmc_late_init(omap3pandora_mmc);
-
/* gpio + 13 drives 32kHz buffer for wifi module */
gpio_32khz = gpio + 13;
ret = gpio_request_one(gpio_32khz, GPIOF_OUT_INIT_HIGH, "wifi 32kHz");
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 6410043..6d0deb9 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -211,9 +211,9 @@ static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA,
- .gpio_cd = -EINVAL,
+ .gpiochip_cd = "twl4030_gpio",
+ .gpio_cd = 0, /* mmc0_cd offset in twl4030 */
.gpio_wp = 23,
- .deferred = true,
},
{} /* Terminator */
};
@@ -282,10 +282,6 @@ static int
omap3stalker_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
- /* gpio + 0 is "mmc0_cd" (input/IRQ) */
- mmc[0].gpio_cd = gpio + 0;
- omap_hsmmc_late_init(mmc);
-
/*
* Most GPIOs are for USB OTG. Some are mostly sent to
* the P2 connector; notably LEDA for the LCD backlight.
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 8842e04..cf270b8 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -99,8 +99,9 @@ static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+ .gpiochip_cd = "twl4030_gpio",
+ .gpio_cd = 0, /* mmc0_cd offset in twl4030 */
.gpio_wp = 29,
- .deferred = true,
},
{} /* Terminator */
};
@@ -118,10 +119,6 @@ static struct gpio_led gpio_leds[];
static int touchbook_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
- /* gpio + 0 is "mmc0_cd" (input/IRQ) */
- mmc[0].gpio_cd = gpio + 0;
- omap_hsmmc_late_init(mmc);
-
/* REVISIT: need ehci-omap hooks for external VBUS
* power switch and overcurrent detect
*/
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 3d39cdb..604df86 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -203,9 +203,10 @@ static struct omap2_hsmmc_info mmc[] = {
.name = "external",
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA,
+ .gpiochip_cd = "twl4030_gpio",
+ .gpio_cd = 0, /* mmc0_cd offset in twl4030 */
.gpio_wp = -EINVAL,
.power_saving = true,
- .deferred = true,
},
{
.name = "internal",
@@ -232,10 +233,6 @@ static int zoom_twl_gpio_setup(struct device *dev,
{
int ret;
- /* gpio + 0 is "mmc0_cd" (input/IRQ) */
- mmc[0].gpio_cd = gpio + 0;
- omap_hsmmc_late_init(mmc);
-
ret = gpio_request_one(LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW,
"lcd enable");
if (ret)
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
