Hi On Sun, 12 Feb 2012, Russell King - ARM Linux wrote: > The other allnoconfig issue is: > > arch/arm/mach-omap2/built-in.o:(.data+0xa3d0): undefined reference to `omap_i2c_reset' > > which looks like hwmod can't cope with the I2C_OMAP being disabled. > > I don't propose these are fixed for v3.3, but they certainly should be > fixed for v3.4. Thanks for the report. Here's a patch for this for 3.4. Compile-tested only; will boot-test it as part of the v2 of the 3.4 hwmod changes. - Paul From: Paul Walmsley <paul@xxxxxxxxx> Date: Sun, 12 Feb 2012 11:49:34 -0700 Subject: [PATCH] ARM: OMAP2+: I2C: always compile I2C reset code, even if I2C driver is not built During kernel init, we reset all IP blocks on the OMAP that we can, even if there is no driver compiled for that IP block. Unlike most IP blocks, the I2C block requires some extra programming for this to work. This reset code is incorrectly omitted when the I2C driver is deselected. In this circumstance, the build breaks. Fix by compiling the I2C reset code unconditionally. Problem reported by Russell King <linux@xxxxxxxxxxxxxxxx>. Signed-off-by: Paul Walmsley <paul@xxxxxxxxx> Cc: Russell King <linux@xxxxxxxxxxxxxxxx> --- arch/arm/mach-omap2/Makefile | 5 +---- 1 files changed, 1 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index fc9b238..0d5676c 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -4,7 +4,7 @@ # Common support obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \ - common.o gpio.o dma.o wd_timer.o display.o + common.o gpio.o dma.o wd_timer.o display.o i2c.o omap-2-3-common = irq.o sdrc.o hwmod-common = omap_hwmod.o \ @@ -182,9 +182,6 @@ obj-$(CONFIG_OMAP_IOMMU) += iommu2.o iommu-$(CONFIG_OMAP_IOMMU) := omap-iommu.o obj-y += $(iommu-m) $(iommu-y) -i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o -obj-y += $(i2c-omap-m) $(i2c-omap-y) - ifneq ($(CONFIG_TIDSPBRIDGE),) obj-y += dsp.o endif -- 1.7.9 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
