Another issue (through lower priority) is this: twl-common.c:(.init.text+0x2e48): undefined reference to `omap34xx_vddmpu_volt_data' twl-common.c:(.init.text+0x2e4c): undefined reference to `omap34xx_vddcore_volt_data' twl-common.c:(.init.text+0x2e5c): undefined reference to `omap36xx_vddmpu_volt_data' twl-common.c:(.init.text+0x2e60): undefined reference to `omap36xx_vddcore_volt_data' twl-common.c:(.init.text+0x2830): undefined reference to `omap44xx_vdd_mpu_volt_data' twl-common.c:(.init.text+0x283c): undefined reference to `omap44xx_vdd_iva_volt_data' twl-common.c:(.init.text+0x2844): undefined reference to `omap44xx_vdd_core_volt_data' produced by the allnoconfig build. The voltage domain code is always built into the kernel, but it references the operating point code for the voltage tables. The voltage tables are only built in when PM_OPP is enabled. So, this means that either the voltage tables must always be built in, or the references need to be surrounded by #ifdef CONFIG_PM_OPP. The former can be done in two ways: either move those tables out of opp*.c, or get rid of PM_OPP entirely as it must always be enabled. The other allnoconfig issue is: arch/arm/mach-omap2/built-in.o:(.data+0xa3d0): undefined reference to `omap_i2c_reset' which looks like hwmod can't cope with the I2C_OMAP being disabled. I don't propose these are fixed for v3.3, but they certainly should be fixed for v3.4. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
