Rex Feany <rfeany@xxxxxxxxx> writes: > Thus spake Tony Lindgren (tony@xxxxxxxxxxx): > >> Please everybody using omaps with mainline give a test for the >> merge of the various fixes planned. I've done a branch with >> v3.3-rc3 + Russell's fixes + Paul's serial port fixes + fixes >> that I've queued up. >> >> If you still see problems with compiling, booting, or slow serial >> port, please post the issues to linux-omap and LAKML lists >> immediately. > > With the testing branch, my serial port is still very slow. > The console is set to 115200, dmesg takes almost a minute to print out. > I'm testing on a beagleboard-xm, which has the DM3730. > (if I change omap2_pm_idle() to never call omap_sram_idle() things improve *a lot*). > > config: http://tonya.fnordsoft.com/omap-testing/config > dmesg: http://tonya.fnordsoft.com/omap-testing/testing-dmesg Looking at your config, I see quite a few changes from the default omap2plus_defconfig. Also, based on your config and your dmesg output, you're booting a 3.3-rc1 kernel. Tony's branch is based on -rc3, so I'm a bit confused about what you're testing. Can you double check that you're building and booting using Tony's -rc3 based branch? Also, can you do a test using omap2plus_defconfig? If it works with omap2plus_defconfig, it would be a great help if you can slowly enable/diable the config options you care about until it breaks so we can isolate the problem you're seeing. Thanks, Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
