On 11/16/2011 05:02 AM, Rajendra Nayak wrote:
> Pass minimal data needed for console boot, from dt, for
> OMAP4 panda/sdp and OMAP3 beagle boards, and get rid of the
> static initialization from generic board file.
>
> Signed-off-by: Rajendra Nayak <rnayak@xxxxxx>
> ---
> arch/arm/boot/dts/omap3-beagle.dts | 17 +++++++++++++++++
> arch/arm/boot/dts/omap3.dtsi | 27 +++++++++++++++++++++++++++
> arch/arm/boot/dts/omap4-panda.dts | 17 +++++++++++++++++
> arch/arm/boot/dts/omap4-sdp.dts | 17 +++++++++++++++++
> arch/arm/boot/dts/omap4.dtsi | 24 ++++++++++++++++++++++++
> arch/arm/mach-omap2/board-generic.c | 1 -
> 6 files changed, 102 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
> index 9486be6..4c8f11e 100644
> --- a/arch/arm/boot/dts/omap3-beagle.dts
> +++ b/arch/arm/boot/dts/omap3-beagle.dts
> @@ -27,3 +27,20 @@
> reg = <0x80000000 0x20000000>; /* 512 MB */
> };
> };
> +
> +&uart1 {
> + clock-frequency = <48000000>;
> +};
> +
> +&uart2 {
> + clock-frequency = <48000000>;
> +};
> +
> +&uart3 {
> + ti,console_hwmod;
> + clock-frequency = <48000000>;
> +};
> +
> +&uart4 {
> + clock-frequency = <48000000>;
> +};
> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
> index d202bb5..ea591c5 100644
> --- a/arch/arm/boot/dts/omap3.dtsi
> +++ b/arch/arm/boot/dts/omap3.dtsi
> @@ -13,6 +13,13 @@
> / {
> compatible = "ti,omap3430", "ti,omap3";
>
> + aliases {
> + uart1 = &uart1;
> + uart2 = &uart2;
> + uart3 = &uart3;
> + uart4 = &uart4;
> + };
> +
> cpus {
> cpu@0 {
> compatible = "arm,cortex-a8";
> @@ -59,5 +66,25 @@
> interrupt-controller;
> #interrupt-cells = <1>;
> };
> +
> + uart1: uart@1 {
Use the generic name serial and the address: uart1: serial@1234abcd
> + compatible = "ti,omap-uart";
> + ti,hwmods = "uart1";
> + };
> +
> + uart2: uart@2 {
> + compatible = "ti,omap-uart";
> + ti,hwmods = "uart2";
> + };
> +
> + uart3: uart@3 {
> + compatible = "ti,omap-uart";
> + ti,hwmods = "uart3";
> + };
> +
> + uart4: uart@4 {
> + compatible = "ti,omap-uart";
> + ti,hwmods = "uart4";
> + };
> };
> };
> diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
> index c702657..aa65449 100644
> --- a/arch/arm/boot/dts/omap4-panda.dts
> +++ b/arch/arm/boot/dts/omap4-panda.dts
> @@ -27,3 +27,20 @@
> reg = <0x80000000 0x40000000>; /* 1 GB */
> };
> };
> +
> +&uart1 {
> + clock-frequency = <48000000>;
> +};
> +
> +&uart2 {
> + clock-frequency = <48000000>;
> +};
> +
> +&uart3 {
> + ti,console_hwmod;
> + clock-frequency = <48000000>;
> +};
> +
> +&uart4 {
> + clock-frequency = <48000000>;
> +};
> diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
> index 066e28c..524f5bf 100644
> --- a/arch/arm/boot/dts/omap4-sdp.dts
> +++ b/arch/arm/boot/dts/omap4-sdp.dts
> @@ -27,3 +27,20 @@
> reg = <0x80000000 0x40000000>; /* 1 GB */
> };
> };
> +
> +&uart1 {
> + clock-frequency = <48000000>;
> +};
> +
> +&uart2 {
> + clock-frequency = <48000000>;
> +};
> +
> +&uart3 {
> + ti,console_hwmod;
> + clock-frequency = <48000000>;
> +};
> +
> +&uart4 {
> + clock-frequency = <48000000>;
It doesn't seem that this frequency ever varies and is likely to be
replaced with clock bindings, so maybe just put it in the dtsi files.
Rob
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
