This series adds minimal device tree support for OMAP-serial driver, and is based on top of the latest runtime-PM changes from Govind[1] posted here[2]. The series passes minimal data that allows serial console boot, with UART's initialised from device tree. However some of low power support for UART and remote wakeup needs more work. Boot tested on OMAP4 panda and OMAP4 sdp boards. [1] git://gitorious.org/runtime_3-0/runtime_3-0.git 3.2-rc1_uart_runtime [2] http://www.mail-archive.com/linux-omap@xxxxxxxxxxxxxxx/msg58486.html Rajendra Nayak (3): ARM: omap_device: handle first time activation of console device omap-serial: Add minimal device tree support ARM: omap: pass minimal SoC/board data for UART from dt .../devicetree/bindings/arm/omap/omap.txt | 1 + .../devicetree/bindings/serial/omap_serial.txt | 8 ++++ arch/arm/boot/dts/omap3-beagle.dts | 17 +++++++++ arch/arm/boot/dts/omap3.dtsi | 27 ++++++++++++++ arch/arm/boot/dts/omap4-panda.dts | 17 +++++++++ arch/arm/boot/dts/omap4-sdp.dts | 17 +++++++++ arch/arm/boot/dts/omap4.dtsi | 24 +++++++++++++ arch/arm/mach-omap2/board-generic.c | 1 - arch/arm/plat-omap/omap_device.c | 33 +++++++++++++++++- drivers/tty/serial/omap-serial.c | 37 +++++++++++++++++++- 10 files changed, 179 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/serial/omap_serial.txt -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
