On Sunday 02 October 2011 08:15 PM, Arnd Bergmann wrote: > These three boards unconditionally use the twl4030 driver > from the board-zoom-display.c file. Make sure that the driver > is always there. > We also need to select the I2C core so we are able to build > that driver. > > Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx> > --- > arch/arm/mach-omap2/Kconfig | 6 ++++++ > 1 files changed, 6 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig > index 57b66d5..4deeade 100644 > --- a/arch/arm/mach-omap2/Kconfig > +++ b/arch/arm/mach-omap2/Kconfig > @@ -253,6 +253,8 @@ config MACH_OMAP_ZOOM2 > select SERIAL_CORE_CONSOLE > select SERIAL_8250_CONSOLE > select REGULATOR_FIXED_VOLTAGE > + select TWL4030_CORE > + select I2C > Another option to ensure I2C is selected when TWL* drivers are selected is let it depends on I2C. That wat we can avoid patching every machine entry with I2C option. Not a strong opinion though. Regards Santosh -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html