These three boards unconditionally use the twl4030 driver from the board-zoom-display.c file. Make sure that the driver is always there. We also need to select the I2C core so we are able to build that driver. Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx> --- arch/arm/mach-omap2/Kconfig | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 57b66d5..4deeade 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -253,6 +253,8 @@ config MACH_OMAP_ZOOM2 select SERIAL_CORE_CONSOLE select SERIAL_8250_CONSOLE select REGULATOR_FIXED_VOLTAGE + select TWL4030_CORE + select I2C config MACH_OMAP_ZOOM3 bool "OMAP3630 Zoom3 board" @@ -263,6 +265,8 @@ config MACH_OMAP_ZOOM3 select SERIAL_CORE_CONSOLE select SERIAL_8250_CONSOLE select REGULATOR_FIXED_VOLTAGE + select TWL4030_CORE + select I2C config MACH_CM_T35 bool "CompuLab CM-T35/CM-T3730 modules" @@ -304,6 +308,8 @@ config MACH_OMAP_3630SDP depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBP + select TWL4030_CORE + select I2C config MACH_TI8168EVM bool "TI8168 Evaluation Module" -- 1.7.5.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
