Hi Kevin, thanks for your help. > CPU is staying in C0 probably because UARTs are not being idled, so SoC > cannot hit deeper idle states. Try the following at the command line to > to enable UART idle timeouts, so the SoC can attempt idle after the > timeout period > > # UART timeouts: omap-serial (4th UART only on OMAP36xx and OMAP4) > echo 5 > /sys/devices/platform/omap/omap_uart.0/sleep_timeout > echo 5 > /sys/devices/platform/omap/omap_uart.1/sleep_timeout > echo 5 > /sys/devices/platform/omap/omap_uart.2/sleep_timeout > echo 5 > /sys/devices/platform/omap/omap_uart.3/sleep_timeout > > After 5 seconds of inactivity on the UARTs, you should see the SoC > hitting deeper C-states. I've tried that but it still doesn't hit any C-state deeper than 0. I'll try the same test using your pm branch you pointed me out and post the results. Regards. -- Javier Martin Vista Silicon S.L. CDTUC - FASE C - Oficina S-345 Avda de los Castros s/n 39005- Santander. Cantabria. Spain +34 942 25 32 60 www.vista-silicon.com -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
