On Wed, 2011-08-31 at 10:00 -0500, Andy Doan wrote:
> On 08/31/2011 08:23 AM, Tomi Valkeinen wrote:
> > Add i2c bus number for DVI output. The driver uses this to detect if a
> > panel is connected and to read EDID.
> >
> > Signed-off-by: Tomi Valkeinen<tomi.valkeinen@xxxxxx>
> > ---
> > arch/arm/mach-omap2/board-omap3beagle.c | 1 +
> > arch/arm/mach-omap2/board-omap4panda.c | 1 +
> > 2 files changed, 2 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
> > index 3ae16b4..13244e9 100644
> > --- a/arch/arm/mach-omap2/board-omap3beagle.c
> > +++ b/arch/arm/mach-omap2/board-omap3beagle.c
> > @@ -207,6 +207,7 @@ static struct panel_generic_dpi_data dvi_panel = {
> > .name = "generic",
> > .platform_enable = beagle_enable_dvi,
> > .platform_disable = beagle_disable_dvi,
> > + .i2c_bus_num = 3,
> > };
> >
> > static struct omap_dss_device beagle_dvi_device = {
> > diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
> > index 9aaa960..d5760e3 100644
> > --- a/arch/arm/mach-omap2/board-omap4panda.c
> > +++ b/arch/arm/mach-omap2/board-omap4panda.c
> > @@ -459,6 +459,7 @@ static struct panel_generic_dpi_data omap4_dvi_panel = {
> > .name = "generic",
> > .platform_enable = omap4_panda_enable_dvi,
> > .platform_disable = omap4_panda_disable_dvi,
> > + .i2c_bus_num = 3,
> > };
> >
> > struct omap_dss_device omap4_panda_dvi_device = {
>
> Can you add a similar patch for board-overo.c? I've tested earlier
> versions of this patch series on a Tide+Tobi successfully. Here's a copy
> of my patch:
>
> http://tinyurl.com/3cek5m7
Sure. I only added the boards I know have the ddc i2c on bus 3 (i.e.
those I was able to test).
Tomi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
