On 08/31/2011 08:23 AM, Tomi Valkeinen wrote:
Add i2c bus number for DVI output. The driver uses this to detect if a
panel is connected and to read EDID.
Signed-off-by: Tomi Valkeinen<tomi.valkeinen@xxxxxx>
---
arch/arm/mach-omap2/board-omap3beagle.c | 1 +
arch/arm/mach-omap2/board-omap4panda.c | 1 +
2 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 3ae16b4..13244e9 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -207,6 +207,7 @@ static struct panel_generic_dpi_data dvi_panel = {
.name = "generic",
.platform_enable = beagle_enable_dvi,
.platform_disable = beagle_disable_dvi,
+ .i2c_bus_num = 3,
};
static struct omap_dss_device beagle_dvi_device = {
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 9aaa960..d5760e3 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -459,6 +459,7 @@ static struct panel_generic_dpi_data omap4_dvi_panel = {
.name = "generic",
.platform_enable = omap4_panda_enable_dvi,
.platform_disable = omap4_panda_disable_dvi,
+ .i2c_bus_num = 3,
};
struct omap_dss_device omap4_panda_dvi_device = {
Can you add a similar patch for board-overo.c? I've tested earlier
versions of this patch series on a Tide+Tobi successfully. Here's a copy
of my patch:
http://tinyurl.com/3cek5m7
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
