From: Anand Gadiyar <gadiyar@xxxxxx> This patch enables the DMA mode1 RX support for endpoints that use BULK transactions. This will result in a throughput increase of around 30-40% for BULK transfers (mass-storage/mtp/ptp usecases) Tested: Mass-storage, MTP, PTP, ADB, RNDIS gadgets Signed-off-by: Anand Gadiyar <gadiyar@xxxxxx> Signed-off-by: Moiz Sonasath <m-sonasath@xxxxxx> Signed-off-by: Vikram Pandita <vikram.pandita@xxxxxx> --- drivers/usb/musb/musb_gadget.c | 38 ++++++++++++++++++++++++++------------ 1 files changed, 26 insertions(+), 12 deletions(-) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 8c41a2e..6841f91 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -624,6 +624,7 @@ void musb_g_tx(struct musb *musb, u8 epnum) /* * Context: controller locked, IRQs blocked, endpoint selected */ + static void rxstate(struct musb *musb, struct musb_request *req) { const u8 epnum = req->epnum; @@ -634,6 +635,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) u16 len; u16 csr = musb_readw(epio, MUSB_RXCSR); struct musb_hw_ep *hw_ep = &musb->endpoints[epnum]; + u8 use_mode_1; if (hw_ep->is_shared_fifo) musb_ep = &hw_ep->ep_in; @@ -683,6 +685,16 @@ static void rxstate(struct musb *musb, struct musb_request *req) if (csr & MUSB_RXCSR_RXPKTRDY) { len = musb_readw(epio, MUSB_RXCOUNT); + + /* + * Enable DMA Mode 1 RX transfers only for endpoints using BULK transactions + */ + + if (musb_ep->type == USB_ENDPOINT_XFER_BULK && len == musb_ep->packet_sz) + use_mode_1 = 1; + else + use_mode_1 = 0; + if (request->actual < request->length) { #ifdef CONFIG_USB_INVENTRA_DMA if (is_buffer_mapped(req)) { @@ -714,10 +726,11 @@ static void rxstate(struct musb *musb, struct musb_request *req) * then becomes usable as a runtime "use mode 1" hint... */ - csr |= MUSB_RXCSR_DMAENAB; -#ifdef USE_MODE1 + if (use_mode_1) { csr |= MUSB_RXCSR_AUTOCLEAR; - /* csr |= MUSB_RXCSR_DMAMODE; */ + musb_writew(epio, MUSB_RXCSR, csr); + csr |= MUSB_RXCSR_DMAENAB; + musb_writew(epio, MUSB_RXCSR, csr); /* this special sequence (enabling and then * disabling MUSB_RXCSR_DMAMODE) is required @@ -725,26 +738,27 @@ static void rxstate(struct musb *musb, struct musb_request *req) */ musb_writew(epio, MUSB_RXCSR, csr | MUSB_RXCSR_DMAMODE); -#else + musb_writew(epio, MUSB_RXCSR, csr); + + } else { if (!musb_ep->hb_mult && musb_ep->hw_ep->rx_double_buffered) csr |= MUSB_RXCSR_AUTOCLEAR; -#endif + csr |= MUSB_RXCSR_DMAENAB; musb_writew(epio, MUSB_RXCSR, csr); + } if (request->actual < request->length) { int transfer_size = 0; -#ifdef USE_MODE1 + if (use_mode_1) { transfer_size = min(request->length - request->actual, channel->max_len); -#else + musb_ep->dma->desired_mode = 1; + } else { transfer_size = min(request->length - request->actual, (unsigned)len); -#endif - if (transfer_size <= musb_ep->packet_sz) - musb_ep->dma->desired_mode = 0; - else - musb_ep->dma->desired_mode = 1; + musb_ep->dma->desired_mode = 0; + } use_dma = c->channel_program( channel, -- 1.6.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html