here is my quick feedback: On Wed, Aug 3, 2011 at 10:29, Tero Kristo <t-kristo@xxxxxx> wrote: > > This patch separates board specific voltage and oscillator ramp / setup > times from the core code. Things changed: > > - on/sleep/ret/off voltage setup moved from common twl code to > VC / VP data (oppxxxx_data.c files) > - added board support for vdd ramp up / down times > - added board support for oscillator setup time declaration > > Todo: split patch into more easily manageable parts. > > Applies on top of pm/wip/voltdm branch, based on work done by Vishwanath > Sripathy. > > Signed-off-by: Tero Kristo <t-kristo@xxxxxx> > Cc: Vishwanath Sripathy <vishwanath.bs@xxxxxx> > --- > arch/arm/mach-omap2/omap_opp_data.h | 15 +++ > arch/arm/mach-omap2/omap_twl.c | 59 ---------- > arch/arm/mach-omap2/opp3xxx_data.c | 62 ++++++++++ > arch/arm/mach-omap2/opp4xxx_data.c | 47 ++++++++ > arch/arm/mach-omap2/prcm.c | 11 ++ > arch/arm/mach-omap2/prm2xxx_3xxx.c | 6 + > arch/arm/mach-omap2/prm2xxx_3xxx.h | 1 + > arch/arm/mach-omap2/prm44xx.c | 7 + > arch/arm/mach-omap2/prm44xx.h | 1 + > arch/arm/mach-omap2/vc.c | 153 +++++++++++++++++++++---- > arch/arm/mach-omap2/vc.h | 1 - > arch/arm/mach-omap2/voltage.c | 22 ++++ > arch/arm/mach-omap2/voltage.h | 55 ++++++++- > arch/arm/mach-omap2/voltagedomains3xxx_data.c | 8 ++ > arch/arm/mach-omap2/voltagedomains44xx_data.c | 8 ++ > arch/arm/mach-omap2/vp.c | 4 +- > arch/arm/plat-omap/include/plat/prcm.h | 7 + > 17 files changed, 377 insertions(+), 90 deletions(-) > > diff --git a/arch/arm/mach-omap2/omap_opp_data.h b/arch/arm/mach-omap2/omap_opp_data.h > index c784c12..b5fe711 100644 > --- a/arch/arm/mach-omap2/omap_opp_data.h > +++ b/arch/arm/mach-omap2/omap_opp_data.h > @@ -86,11 +86,26 @@ extern int __init omap_init_opp_table(struct omap_opp_def *opp_def, > > extern struct omap_volt_data omap34xx_vddmpu_volt_data[]; > extern struct omap_volt_data omap34xx_vddcore_volt_data[]; > +extern struct omap_vp_param omap34xx_mpu_vp_data; > +extern struct omap_vp_param omap34xx_core_vp_data; > +extern struct omap_vc_param omap34xx_mpu_vc_data; > +extern struct omap_vc_param omap34xx_core_vc_data; > + > extern struct omap_volt_data omap36xx_vddmpu_volt_data[]; > extern struct omap_volt_data omap36xx_vddcore_volt_data[]; > +extern struct omap_vp_param omap36xx_mpu_vp_data; > +extern struct omap_vp_param omap36xx_core_vp_data; > +extern struct omap_vc_param omap36xx_mpu_vc_data; > +extern struct omap_vc_param omap36xx_core_vc_data; > > extern struct omap_volt_data omap44xx_vdd_mpu_volt_data[]; > extern struct omap_volt_data omap44xx_vdd_iva_volt_data[]; > extern struct omap_volt_data omap44xx_vdd_core_volt_data[]; > +extern struct omap_vp_param omap44xx_mpu_vp_data; > +extern struct omap_vp_param omap44xx_iva_vp_data; > +extern struct omap_vp_param omap44xx_core_vp_data; > +extern struct omap_vc_param omap44xx_mpu_vc_data; > +extern struct omap_vc_param omap44xx_iva_vc_data; > +extern struct omap_vc_param omap44xx_core_vc_data; > > #endif /* __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H */ > diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c > index f515a1a..d239792 100644 > --- a/arch/arm/mach-omap2/omap_twl.c > +++ b/arch/arm/mach-omap2/omap_twl.c > @@ -30,16 +30,6 @@ > #define OMAP3_VP_VSTEPMAX_VSTEPMAX 0x04 > #define OMAP3_VP_VLIMITTO_TIMEOUT_US 200 > > -#define OMAP3430_VP1_VLIMITTO_VDDMIN 0x14 > -#define OMAP3430_VP1_VLIMITTO_VDDMAX 0x42 > -#define OMAP3430_VP2_VLIMITTO_VDDMIN 0x18 > -#define OMAP3430_VP2_VLIMITTO_VDDMAX 0x2c > - > -#define OMAP3630_VP1_VLIMITTO_VDDMIN 0x18 > -#define OMAP3630_VP1_VLIMITTO_VDDMAX 0x3c > -#define OMAP3630_VP2_VLIMITTO_VDDMIN 0x18 > -#define OMAP3630_VP2_VLIMITTO_VDDMAX 0x30 > - > #define OMAP4_SRI2C_SLAVE_ADDR 0x12 > #define OMAP4_VDD_MPU_SR_VOLT_REG 0x55 > #define OMAP4_VDD_MPU_SR_CMD_REG 0x56 > @@ -53,13 +43,6 @@ > #define OMAP4_VP_VSTEPMAX_VSTEPMAX 0x04 > #define OMAP4_VP_VLIMITTO_TIMEOUT_US 200 > > -#define OMAP4_VP_MPU_VLIMITTO_VDDMIN 0xA > -#define OMAP4_VP_MPU_VLIMITTO_VDDMAX 0x39 > -#define OMAP4_VP_IVA_VLIMITTO_VDDMIN 0xA > -#define OMAP4_VP_IVA_VLIMITTO_VDDMAX 0x2D > -#define OMAP4_VP_CORE_VLIMITTO_VDDMIN 0xA > -#define OMAP4_VP_CORE_VLIMITTO_VDDMAX 0x28 > - > static bool is_offset_valid; > static u8 smps_offset; > /* > @@ -158,16 +141,9 @@ static u8 twl6030_uv_to_vsel(unsigned long uv) > static struct omap_voltdm_pmic omap3_mpu_pmic = { > .slew_rate = 4000, > .step_size = 12500, > - .on_volt = 1200000, > - .onlp_volt = 1000000, > - .ret_volt = 975000, > - .off_volt = 600000, > - .volt_setup_time = 0xfff, > .vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET, > .vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN, > .vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX, > - .vp_vddmin = OMAP3430_VP1_VLIMITTO_VDDMIN, > - .vp_vddmax = OMAP3430_VP1_VLIMITTO_VDDMAX, > .vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US, > .i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR, > .volt_reg_addr = OMAP3_VDD_MPU_SR_CONTROL_REG, > @@ -179,16 +155,9 @@ static struct omap_voltdm_pmic omap3_mpu_pmic = { > static struct omap_voltdm_pmic omap3_core_pmic = { > .slew_rate = 4000, > .step_size = 12500, > - .on_volt = 1200000, > - .onlp_volt = 1000000, > - .ret_volt = 975000, > - .off_volt = 600000, > - .volt_setup_time = 0xfff, > .vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET, > .vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN, > .vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX, > - .vp_vddmin = OMAP3430_VP2_VLIMITTO_VDDMIN, > - .vp_vddmax = OMAP3430_VP2_VLIMITTO_VDDMAX, > .vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US, > .i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR, > .volt_reg_addr = OMAP3_VDD_CORE_SR_CONTROL_REG, > @@ -200,16 +169,9 @@ static struct omap_voltdm_pmic omap3_core_pmic = { > static struct omap_voltdm_pmic omap4_mpu_pmic = { > .slew_rate = 4000, > .step_size = 12660, > - .on_volt = 1375000, > - .onlp_volt = 1375000, > - .ret_volt = 830000, > - .off_volt = 0, > - .volt_setup_time = 0, > .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, > .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, > .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, > - .vp_vddmin = OMAP4_VP_MPU_VLIMITTO_VDDMIN, > - .vp_vddmax = OMAP4_VP_MPU_VLIMITTO_VDDMAX, > .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, > .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, > .volt_reg_addr = OMAP4_VDD_MPU_SR_VOLT_REG, > @@ -222,16 +184,9 @@ static struct omap_voltdm_pmic omap4_mpu_pmic = { > static struct omap_voltdm_pmic omap4_iva_pmic = { > .slew_rate = 4000, > .step_size = 12660, > - .on_volt = 1188000, > - .onlp_volt = 1188000, > - .ret_volt = 830000, > - .off_volt = 0, > - .volt_setup_time = 0, > .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, > .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, > .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, > - .vp_vddmin = OMAP4_VP_IVA_VLIMITTO_VDDMIN, > - .vp_vddmax = OMAP4_VP_IVA_VLIMITTO_VDDMAX, > .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, > .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, > .volt_reg_addr = OMAP4_VDD_IVA_SR_VOLT_REG, > @@ -244,16 +199,9 @@ static struct omap_voltdm_pmic omap4_iva_pmic = { > static struct omap_voltdm_pmic omap4_core_pmic = { > .slew_rate = 4000, > .step_size = 12660, > - .on_volt = 1200000, > - .onlp_volt = 1200000, > - .ret_volt = 830000, > - .off_volt = 0, > - .volt_setup_time = 0, > .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, > .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, > .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, > - .vp_vddmin = OMAP4_VP_CORE_VLIMITTO_VDDMIN, > - .vp_vddmax = OMAP4_VP_CORE_VLIMITTO_VDDMAX, > .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, > .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, > .volt_reg_addr = OMAP4_VDD_CORE_SR_VOLT_REG, > @@ -288,13 +236,6 @@ int __init omap3_twl_init(void) > if (!cpu_is_omap34xx()) > return -ENODEV; > > - if (cpu_is_omap3630()) { > - omap3_mpu_pmic.vp_vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN; > - omap3_mpu_pmic.vp_vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX; > - omap3_core_pmic.vp_vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN; > - omap3_core_pmic.vp_vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX; > - } > - > /* > * The smartreflex bit on twl4030 specifies if the setting of voltage > * is done over the I2C_SR path. Since this setting is independent of > diff --git a/arch/arm/mach-omap2/opp3xxx_data.c b/arch/arm/mach-omap2/opp3xxx_data.c > index d95f3f9..b5d8294 100644 > --- a/arch/arm/mach-omap2/opp3xxx_data.c > +++ b/arch/arm/mach-omap2/opp3xxx_data.c > @@ -26,6 +26,16 @@ > #include "pm.h" > > /* 34xx */ > +/* OMAP VP parameter values */ > +#define OMAP3430_VP1_VLIMITTO_VDDMIN 0x14 > +#define OMAP3430_VP1_VLIMITTO_VDDMAX 0x42 > +#define OMAP3430_VP2_VLIMITTO_VDDMIN 0x18 > +#define OMAP3430_VP2_VLIMITTO_VDDMAX 0x2c NAK -> we should be using voltages here -> depending on the PMIC used, the rounding factor may not map to TWL4030. I had posted patch for this earlier I believe in series http://marc.info/?l=linux-omap&m=130741297821372&w=2 > + > +#define OMAP3_ON_VOLTAGE_UV 1200000 > +#define OMAP3_ONLP_VOLTAGE_UV 1000000 > +#define OMAP3_RET_VOLTAGE_UV 975000 > +#define OMAP3_OFF_VOLTAGE_UV 600000 Here is what concerns me: a) OMAP OFF voltage is 0 b) OMAP has Max and MIN operational voltages, however, PMIC connected can have it's own voltage ranges as well -> here we remove the ability for PMIC to state its capability and the matching with PMIC Vs OMAP capabilties is not done. > > /* VDD1 */ > > @@ -44,6 +54,18 @@ struct omap_volt_data omap34xx_vddmpu_volt_data[] = { > VOLT_DATA_DEFINE(0, 0, 0, 0), > }; > > +struct omap_vp_param omap34xx_mpu_vp_data = { > + .vddmin = OMAP3430_VP1_VLIMITTO_VDDMIN, > + .vddmax = OMAP3430_VP1_VLIMITTO_VDDMAX, > +}; > + > +struct omap_vc_param omap34xx_mpu_vc_data = { > + .on = OMAP3_ON_VOLTAGE_UV, > + .onlp = OMAP3_ONLP_VOLTAGE_UV, > + .ret = OMAP3_RET_VOLTAGE_UV, > + .off = OMAP3_OFF_VOLTAGE_UV, > +}; > + > /* VDD2 */ > > #define OMAP3430_VDD_CORE_OPP1_UV 975000 > @@ -57,7 +79,23 @@ struct omap_volt_data omap34xx_vddcore_volt_data[] = { > VOLT_DATA_DEFINE(0, 0, 0, 0), > }; > > +struct omap_vp_param omap34xx_core_vp_data = { > + .vddmin = OMAP3430_VP2_VLIMITTO_VDDMIN, > + .vddmax = OMAP3430_VP2_VLIMITTO_VDDMAX, > +}; > + > +struct omap_vc_param omap34xx_core_vc_data = { > + .on = OMAP3_ON_VOLTAGE_UV, > + .onlp = OMAP3_ONLP_VOLTAGE_UV, > + .ret = OMAP3_RET_VOLTAGE_UV, > + .off = OMAP3_OFF_VOLTAGE_UV, > +}; > + > /* 36xx */ > +#define OMAP3630_VP1_VLIMITTO_VDDMIN 0x18 > +#define OMAP3630_VP1_VLIMITTO_VDDMAX 0x3c > +#define OMAP3630_VP2_VLIMITTO_VDDMIN 0x18 > +#define OMAP3630_VP2_VLIMITTO_VDDMAX 0x30 > > /* VDD1 */ > > @@ -74,6 +112,18 @@ struct omap_volt_data omap36xx_vddmpu_volt_data[] = { > VOLT_DATA_DEFINE(0, 0, 0, 0), > }; > > +struct omap_vp_param omap36xx_mpu_vp_data = { > + .vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN, > + .vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX, > +}; > + > +struct omap_vc_param omap36xx_mpu_vc_data = { > + .on = OMAP3_ON_VOLTAGE_UV, > + .onlp = OMAP3_ONLP_VOLTAGE_UV, > + .ret = OMAP3_RET_VOLTAGE_UV, > + .off = OMAP3_OFF_VOLTAGE_UV, > +}; > + > /* VDD2 */ > > #define OMAP3630_VDD_CORE_OPP50_UV 1000000 > @@ -85,6 +135,18 @@ struct omap_volt_data omap36xx_vddcore_volt_data[] = { > VOLT_DATA_DEFINE(0, 0, 0, 0), > }; > > +struct omap_vp_param omap36xx_core_vp_data = { > + .vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN, > + .vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX, > +}; > + > +struct omap_vc_param omap36xx_core_vc_data = { > + .on = OMAP3_ON_VOLTAGE_UV, > + .onlp = OMAP3_ONLP_VOLTAGE_UV, > + .ret = OMAP3_RET_VOLTAGE_UV, > + .off = OMAP3_OFF_VOLTAGE_UV, > +}; > + > /* OPP data */ > > static struct omap_opp_def __initdata omap34xx_opp_def_list[] = { > diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c > index 2293ba2..59f695b 100644 > --- a/arch/arm/mach-omap2/opp4xxx_data.c > +++ b/arch/arm/mach-omap2/opp4xxx_data.c > @@ -31,6 +31,18 @@ > * voltage dependent data for each VDD. > */ > > +#define OMAP4_VP_MPU_VLIMITTO_VDDMIN 0x0a > +#define OMAP4_VP_MPU_VLIMITTO_VDDMAX 0x39 > +#define OMAP4_VP_IVA_VLIMITTO_VDDMIN 0x0a > +#define OMAP4_VP_IVA_VLIMITTO_VDDMAX 0x2d > +#define OMAP4_VP_CORE_VLIMITTO_VDDMIN 0x0a > +#define OMAP4_VP_CORE_VLIMITTO_VDDMAX 0x28 > + > +#define OMAP4_ON_VOLTAGE_UV 1350000 > +#define OMAP4_ONLP_VOLTAGE_UV 1350000 > +#define OMAP4_RET_VOLTAGE_UV 837500 > +#define OMAP4_OFF_VOLTAGE_UV 600000 > + > #define OMAP4430_VDD_MPU_OPP50_UV 1025000 > #define OMAP4430_VDD_MPU_OPP100_UV 1200000 > #define OMAP4430_VDD_MPU_OPPTURBO_UV 1313000 > @@ -44,6 +56,18 @@ struct omap_volt_data omap44xx_vdd_mpu_volt_data[] = { > VOLT_DATA_DEFINE(0, 0, 0, 0), > }; > > +struct omap_vp_param omap44xx_mpu_vp_data = { > + .vddmin = OMAP4_VP_MPU_VLIMITTO_VDDMIN, > + .vddmax = OMAP4_VP_MPU_VLIMITTO_VDDMAX, > +}; > + > +struct omap_vc_param omap44xx_mpu_vc_data = { > + .on = OMAP4_ON_VOLTAGE_UV, > + .onlp = OMAP4_ONLP_VOLTAGE_UV, > + .ret = OMAP4_RET_VOLTAGE_UV, > + .off = OMAP4_OFF_VOLTAGE_UV, > +}; > + > #define OMAP4430_VDD_IVA_OPP50_UV 1013000 > #define OMAP4430_VDD_IVA_OPP100_UV 1188000 > #define OMAP4430_VDD_IVA_OPPTURBO_UV 1300000 > @@ -55,6 +79,18 @@ struct omap_volt_data omap44xx_vdd_iva_volt_data[] = { > VOLT_DATA_DEFINE(0, 0, 0, 0), > }; > > +struct omap_vp_param omap44xx_iva_vp_data = { > + .vddmin = OMAP4_VP_IVA_VLIMITTO_VDDMIN, > + .vddmax = OMAP4_VP_IVA_VLIMITTO_VDDMAX, > +}; > + > +struct omap_vc_param omap44xx_iva_vc_data = { > + .on = OMAP4_ON_VOLTAGE_UV, > + .onlp = OMAP4_ONLP_VOLTAGE_UV, > + .ret = OMAP4_RET_VOLTAGE_UV, > + .off = OMAP4_OFF_VOLTAGE_UV, > +}; > + > #define OMAP4430_VDD_CORE_OPP50_UV 1025000 > #define OMAP4430_VDD_CORE_OPP100_UV 1200000 > > @@ -64,6 +100,17 @@ struct omap_volt_data omap44xx_vdd_core_volt_data[] = { > VOLT_DATA_DEFINE(0, 0, 0, 0), > }; > > +struct omap_vp_param omap44xx_core_vp_data = { > + .vddmin = OMAP4_VP_CORE_VLIMITTO_VDDMIN, > + .vddmax = OMAP4_VP_CORE_VLIMITTO_VDDMAX, > +}; > + > +struct omap_vc_param omap44xx_core_vc_data = { > + .on = OMAP4_ON_VOLTAGE_UV, > + .onlp = OMAP4_ONLP_VOLTAGE_UV, > + .ret = OMAP4_RET_VOLTAGE_UV, > + .off = OMAP4_OFF_VOLTAGE_UV, > +}; > > static struct omap_opp_def __initdata omap44xx_opp_def_list[] = { > /* MPU OPP1 - OPP50 */ > diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c > index 2e40a5c..5d94e91 100644 > --- a/arch/arm/mach-omap2/prcm.c > +++ b/arch/arm/mach-omap2/prcm.c > @@ -42,6 +42,7 @@ > void __iomem *prm_base; > void __iomem *cm_base; > void __iomem *cm2_base; > +static struct omap_osc_data *osc_setup; > > #define MAX_MODULE_ENABLE_WAIT 100000 > > @@ -165,3 +166,13 @@ void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals) > WARN_ON(!cm2_base); > } > } > + > +void __init omap_osc_register(struct omap_osc_data *osc) > +{ > + osc_setup = osc; > +} > + > +struct omap_osc_data *omap_osc_get(void) > +{ > + return osc_setup; > +} > diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c > index 3b83763..2c678e9 100644 > --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c > +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c > @@ -212,3 +212,9 @@ u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset) > { > return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset); > } > + > +void omap3_prm_set_clksetup(unsigned long clksetup) > +{ > + clksetup = clksetup * 32768 / (1000 * 1000) + 1; > + omap3_prm_vcvp_write(clksetup, OMAP3_PRM_CLKSETUP_OFFSET); > +} > diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h > index cef533d..32740a0 100644 > --- a/arch/arm/mach-omap2/prm2xxx_3xxx.h > +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h > @@ -314,6 +314,7 @@ void omap3_prm_vp_clear_txdone(u8 vp_id); > extern u32 omap3_prm_vcvp_read(u8 offset); > extern void omap3_prm_vcvp_write(u32 val, u8 offset); > extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); > +extern void omap3_prm_set_clksetup(unsigned long clksetup); > #endif /* CONFIG_ARCH_OMAP4 */ > > #endif > diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c > index 495a31a..c91c66f 100644 > --- a/arch/arm/mach-omap2/prm44xx.c > +++ b/arch/arm/mach-omap2/prm44xx.c > @@ -26,6 +26,7 @@ > #include "prm-regbits-44xx.h" > #include "prcm44xx.h" > #include "prminst44xx.h" > +#include "scrm44xx.h" > > /* PRM low-level functions */ > > @@ -121,3 +122,9 @@ u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset) > OMAP4430_PRM_DEVICE_INST, > offset); > } > + > +void omap4_prm_set_clksetup(unsigned long clksetup) > +{ > + clksetup = clksetup * 32768 / (1000 * 1000) + 1; > + __raw_writel(clksetup, OMAP4_SCRM_CLKSETUPTIME); > +} > diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h > index 3d66ccd..9b21f33 100644 > --- a/arch/arm/mach-omap2/prm44xx.h > +++ b/arch/arm/mach-omap2/prm44xx.h > @@ -762,6 +762,7 @@ void omap4_prm_vp_clear_txdone(u8 vp_id); > extern u32 omap4_prm_vcvp_read(u8 offset); > extern void omap4_prm_vcvp_write(u32 val, u8 offset); > extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); > +extern void omap4_prm_set_clksetup(unsigned long clksetup); > > # endif > > diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c > index 16fa912..8bbc95a 100644 > --- a/arch/arm/mach-omap2/vc.c > +++ b/arch/arm/mach-omap2/vc.c > @@ -1,14 +1,18 @@ > #include <linux/kernel.h> > #include <linux/delay.h> > #include <linux/init.h> > +#include <linux/clk.h> > +#include <linux/io.h> > > #include <plat/cpu.h> > +#include <plat/prcm.h> > > #include "voltage.h" > #include "vc.h" > #include "prm-regbits-34xx.h" > #include "prm-regbits-44xx.h" > #include "prm44xx.h" > +#include "scrm44xx.h" > > /** > * struct omap_vc_channel_cfg - describe the cfg_channel bitfield > @@ -196,42 +200,153 @@ int omap_vc_bypass_scale(struct voltagedomain *voltdm, > > static void __init omap3_vfsm_init(struct voltagedomain *voltdm) > { > + unsigned long clksetup; > + unsigned long voltsetup2; > + struct omap_osc_data *osc; > /* > * Voltage Manager FSM parameters init > * XXX This data should be passed in from the board file > */ > - voltdm->write(OMAP3_CLKSETUP, OMAP3_PRM_CLKSETUP_OFFSET); > - voltdm->write(OMAP3_VOLTOFFSET, OMAP3_PRM_VOLTOFFSET_OFFSET); > - voltdm->write(OMAP3_VOLTSETUP2, OMAP3_PRM_VOLTSETUP2_OFFSET); > + osc = omap_osc_get(); > + if (osc) { > + clksetup = osc->clk_setup_off; > + omap3_prm_set_clksetup(clksetup); > + } > + > + clksetup = voltdm->read(OMAP3_PRM_CLKSETUP_OFFSET); > + > + voltsetup2 = voltdm->board_data->vdd_setup_off.ramp_up; > + voltsetup2 = voltsetup2 * 32768 / (1000 * 1000) + 1; > + voltdm->write(voltsetup2, OMAP3_PRM_VOLTSETUP2_OFFSET); > + > + voltdm->write(clksetup - voltsetup2, OMAP3_PRM_VOLTOFFSET_OFFSET); > } > > static void __init omap3_vc_init_channel(struct voltagedomain *voltdm) > { > - static bool is_initialized; > + unsigned long temp; > + struct clk *sys_ck; > + u32 sys_clk_rate; > > - if (is_initialized) > + if (!voltdm->board_data) { > + pr_warning("%s: no voltdm board data for %s\n", __func__, > + voltdm->name); > return; > + } > > - omap3_vfsm_init(voltdm); > + sys_ck = clk_get(NULL, "sys_ck"); > + if (IS_ERR(sys_ck)) { > + pr_warning("%s: could not get the sys clk to calculate " > + "various vdd_%s params\n", __func__, voltdm->name); > + return; > + } > + sys_clk_rate = clk_get_rate(sys_ck); > + clk_put(sys_ck); > + /* Divide to avoid overflow */ > + sys_clk_rate /= 1000000; > + > + temp = voltdm->board_data->vdd_setup_off.ramp_up; > + temp = temp * sys_clk_rate / 8; > + > + /* Configure the setup times */ > + voltdm->rmw(voltdm->vfsm->voltsetup_mask, > + temp << __ffs(voltdm->vfsm->voltsetup_mask), > + voltdm->vfsm->voltsetup_reg); > > - is_initialized = true; > + omap3_vfsm_init(voltdm); > } > > +static u32 omap4_calc_volt_ramp(u32 time, u32 clk_rate) > +{ > + u32 prescaler; > + u32 cycles; > + > + cycles = clk_rate / 1000 * time; > + > + cycles /= 64; > + prescaler = 0; > + > + /* shift to next prescaler until no overflow */ > + > + /* scale for div 256 = 64 * 4 */ > + if (cycles > 63) { > + cycles /= 4; > + prescaler++; > + } > + > + /* scale for div 512 = 256 * 2 */ > + if (cycles > 63) { > + cycles /= 2; > + prescaler++; > + } > + > + /* scale for div 2048 = 512 * 4 */ > + if (cycles > 63) { > + cycles /= 4; > + prescaler++; > + } > + > + /* check for overflow => invalid ramp time */ > + if (cycles > 63) > + return 0; > + > + cycles++; > + > + return (prescaler << OMAP4430_RAMP_UP_PRESCAL_SHIFT) | > + (cycles << OMAP4430_RAMP_UP_COUNT_SHIFT); > +} > > /* OMAP4 specific voltage init functions */ > static void __init omap4_vc_init_channel(struct voltagedomain *voltdm) > { > - static bool is_initialized; > - u32 vc_val; > + u32 vc_val, temp; > + struct clk *sys_ck; > + u32 sys_clk_rate; > + unsigned long val; > + struct omap_osc_data *osc; > + > + sys_ck = clk_get(NULL, "sys_clkin_ck"); > + if (IS_ERR(sys_ck)) { > + pr_warning("%s: Could not get sys clk to calculate " > + "various vdd_%s params\n", __func__, voltdm->name); > + return; > + } > + sys_clk_rate = clk_get_rate(sys_ck); > + clk_put(sys_ck); > > - if (is_initialized) > + /* Configure the setup times */ > + vc_val = voltdm->read(voltdm->vfsm->voltsetup_reg); > + > + temp = omap4_calc_volt_ramp(voltdm->board_data->vdd_setup_off.ramp_down, > + sys_clk_rate); > + if (!temp) { > + pr_warning("%s: Invalid VoltOff setup time for vdd%s\n", > + __func__, voltdm->name); > return; > + } > + vc_val |= temp << OMAP4430_RAMP_DOWN_COUNT_SHIFT; > + > + temp = omap4_calc_volt_ramp(voltdm->board_data->vdd_setup_off.ramp_up, > + sys_clk_rate); > + if (!temp) { > + pr_warning("%s: Invalid VoltOff setup time for vdd%s\n", > + __func__, voltdm->name); > + return; > + } > + vc_val |= temp << OMAP4430_RAMP_UP_COUNT_SHIFT; > + > + voltdm->write(vc_val, voltdm->vfsm->voltsetup_reg); > + > + osc = omap_osc_get(); > + > + if (osc) { > + val = osc->clk_setup_off; > + omap4_prm_set_clksetup(val); > + } > > /* XXX These are magic numbers and do not belong! */ > vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT); > voltdm->write(vc_val, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET); > - > - is_initialized = true; > } > > /** > @@ -305,7 +420,6 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) > vc->i2c_slave_addr = voltdm->pmic->i2c_slave_addr; > vc->volt_reg_addr = voltdm->pmic->volt_reg_addr; > vc->cmd_reg_addr = voltdm->pmic->cmd_reg_addr; > - vc->setup_time = voltdm->pmic->volt_setup_time; > > /* Configure the i2c slave address for this VC */ > voltdm->rmw(vc->smps_sa_mask, > @@ -329,10 +443,10 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) > } > > /* Set up the on, inactive, retention and off voltage */ > - on_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->on_volt); > - onlp_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->onlp_volt); > - ret_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->ret_volt); > - off_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->off_volt); > + on_vsel = voltdm->pmic->uv_to_vsel(voltdm->vc_param->on); > + onlp_vsel = voltdm->pmic->uv_to_vsel(voltdm->vc_param->onlp); > + ret_vsel = voltdm->pmic->uv_to_vsel(voltdm->vc_param->ret); > + off_vsel = voltdm->pmic->uv_to_vsel(voltdm->vc_param->off); > val = ((on_vsel << vc->common->cmd_on_shift) | > (onlp_vsel << vc->common->cmd_onlp_shift) | > (ret_vsel << vc->common->cmd_ret_shift) | > @@ -343,11 +457,6 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) > /* Channel configuration */ > omap_vc_config_channel(voltdm); > > - /* Configure the setup times */ > - voltdm->rmw(voltdm->vfsm->voltsetup_mask, > - vc->setup_time << __ffs(voltdm->vfsm->voltsetup_mask), > - voltdm->vfsm->voltsetup_reg); > - > omap_vc_i2c_init(voltdm); > > if (cpu_is_omap34xx()) > diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h > index ec50643..e6fdd23 100644 > --- a/arch/arm/mach-omap2/vc.h > +++ b/arch/arm/mach-omap2/vc.h > @@ -80,7 +80,6 @@ struct omap_vc_channel { > u16 i2c_slave_addr; > u16 volt_reg_addr; > u16 cmd_reg_addr; > - u16 setup_time; > u8 cfg_channel; > bool i2c_high_speed; > > diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c > index cebc8b1..a95d2dd4 100644 > --- a/arch/arm/mach-omap2/voltage.c > +++ b/arch/arm/mach-omap2/voltage.c > @@ -428,3 +428,25 @@ void voltdm_init(struct voltagedomain **voltdms) > _voltdm_register(*v); > } > } > + > +/** > + * omap_voltage_register_board_params - set board values for a voltagedomain > + * @voltdm: voltagedomain whose parameters should be set > + * @board_params: board parameters for voltagedomain > + * > + * Sets up board parameters for a voltagedomain. These include the ramp up > + * and ramp down times for the domain. Return 0 for success, -EINVAL for > + * invalid voltagedomain. > + */ > +int omap_voltage_register_board_params(struct voltagedomain *voltdm, > + struct omap_volt_board_data *board_params) > +{ > + if (!voltdm || IS_ERR(voltdm)) { > + pr_warning("%s: VDD specified does not exist!\n", __func__); > + return -EINVAL; > + } > + > + voltdm->board_data = board_params; > + > + return 0; > +} > diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h > index b4c6259..e4b9e0e 100644 > --- a/arch/arm/mach-omap2/voltage.h > +++ b/arch/arm/mach-omap2/voltage.h > @@ -70,6 +70,9 @@ struct voltagedomain { > const struct omap_vfsm_instance *vfsm; > struct omap_vp_instance *vp; > struct omap_voltdm_pmic *pmic; > + struct omap_vp_param *vp_param; > + struct omap_vc_param *vc_param; > + struct omap_volt_board_data *board_data; > > /* VC/VP register access functions: SoC specific */ > u32 (*read) (u8 offset); > @@ -89,6 +92,28 @@ struct voltagedomain { > }; > > /** > + * omap_vdd_setuptime - vdd set up time info > + * @ramp_up : VDD ramp up time in us > + * @ramp_down : VDD ramp down time in us, not used in OMAP3 > + * @clksetup : setup time of the oscillator system clock (sys_clk) in us > + */ > +struct omap_vdd_setuptime { > + u16 ramp_up; > + u16 ramp_down; > + u16 clksetup; > +}; > + > +/** > + * omap_volt_board_data - vdd set up time > + * @vdd_setup_ret : VDD setup time for retention mode > + * @vdd_setup_off : VDD setup time for off mode > + */ > +struct omap_volt_board_data { > + struct omap_vdd_setuptime vdd_setup_ret; > + struct omap_vdd_setuptime vdd_setup_off; > +}; > + > +/** > * struct omap_volt_data - Omap voltage specific data. > * @voltage_nominal: The possible voltage value in uV > * @sr_efuse_offs: The offset of the efuse register(from system > @@ -119,10 +148,6 @@ struct omap_volt_data { > struct omap_voltdm_pmic { > int slew_rate; > int step_size; > - u32 on_volt; > - u32 onlp_volt; > - u32 ret_volt; > - u32 off_volt; > u16 volt_setup_time; > u16 i2c_slave_addr; > u16 volt_reg_addr; > @@ -130,8 +155,6 @@ struct omap_voltdm_pmic { > u8 vp_erroroffset; > u8 vp_vstepmin; > u8 vp_vstepmax; > - u8 vp_vddmin; > - u8 vp_vddmax; > u8 vp_timeout_us; > bool i2c_high_speed; > u8 i2c_mcode; > @@ -139,6 +162,18 @@ struct omap_voltdm_pmic { > u8 (*uv_to_vsel) (unsigned long uV); > }; > > +struct omap_vp_param { > + u8 vddmax; > + u8 vddmin; > +}; > + > +struct omap_vc_param { > + u32 on; > + u32 onlp; > + u32 ret; > + u32 off; > +}; > + > void omap_voltage_get_volttable(struct voltagedomain *voltdm, > struct omap_volt_data **volt_data); > struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, > @@ -149,6 +184,8 @@ int omap_voltage_register_pmic(struct voltagedomain *voltdm, > void omap_change_voltscale_method(struct voltagedomain *voltdm, > int voltscale_method); > int omap_voltage_late_init(void); > +int omap_voltage_register_board_params(struct voltagedomain *voltdm, > + struct omap_volt_board_data *board_params); > #else > static inline int omap_voltage_register_pmic(struct voltagedomain *voltdm, > struct omap_voltdm_pmic *pmic) > @@ -161,6 +198,12 @@ static inline int omap_voltage_late_init(void) > { > return -EINVAL; > } > +static inline int omap_voltage_register_board_params( > + struct voltagedomain *voltdm, > + struct omap_volt_board_data *board_params) > +{ > + return -EINVAL; > +} > #endif > > extern void omap2xxx_voltagedomains_init(void); > diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c > index b0d0ae1..9c907af 100644 > --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c > +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c > @@ -90,9 +90,17 @@ void __init omap3xxx_voltagedomains_init(void) > if (cpu_is_omap3630()) { > omap3_voltdm_mpu.volt_data = omap36xx_vddmpu_volt_data; > omap3_voltdm_core.volt_data = omap36xx_vddcore_volt_data; > + omap3_voltdm_mpu.vp_param = &omap36xx_mpu_vp_data; > + omap3_voltdm_core.vp_param = &omap36xx_core_vp_data; > + omap3_voltdm_mpu.vc_param = &omap36xx_mpu_vc_data; > + omap3_voltdm_core.vc_param = &omap36xx_core_vc_data; > } else { > omap3_voltdm_mpu.volt_data = omap34xx_vddmpu_volt_data; > omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data; > + omap3_voltdm_mpu.vp_param = &omap34xx_mpu_vp_data; > + omap3_voltdm_core.vp_param = &omap34xx_core_vp_data; > + omap3_voltdm_mpu.vc_param = &omap34xx_mpu_vc_data; > + omap3_voltdm_core.vc_param = &omap34xx_core_vc_data; > } > > for (i = 0; voltdm = voltagedomains_omap3[i], voltdm; i++) > diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c > index c4584e9..0a22960 100644 > --- a/arch/arm/mach-omap2/voltagedomains44xx_data.c > +++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c > @@ -104,6 +104,14 @@ void __init omap44xx_voltagedomains_init(void) > omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data; > omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data; > > + omap4_voltdm_mpu.vp_param = &omap44xx_mpu_vp_data; > + omap4_voltdm_iva.vp_param = &omap44xx_iva_vp_data; > + omap4_voltdm_core.vp_param = &omap44xx_core_vp_data; > + > + omap4_voltdm_mpu.vc_param = &omap44xx_mpu_vc_data; > + omap4_voltdm_iva.vc_param = &omap44xx_iva_vc_data; > + omap4_voltdm_core.vc_param = &omap44xx_core_vc_data; > + > for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++) > voltdm->sys_clk.name = sys_clk_name; > > diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c > index 66bd700..34bced5 100644 > --- a/arch/arm/mach-omap2/vp.c > +++ b/arch/arm/mach-omap2/vp.c > @@ -53,8 +53,8 @@ void __init omap_vp_init(struct voltagedomain *voltdm) > sys_clk_rate = voltdm->sys_clk.rate / 1000; > > timeout = (sys_clk_rate * voltdm->pmic->vp_timeout_us) / 1000; > - vddmin = voltdm->pmic->vp_vddmin; > - vddmax = voltdm->pmic->vp_vddmax; > + vddmin = voltdm->vp_param->vddmin; > + vddmax = voltdm->vp_param->vddmax; > > waittime = ((voltdm->pmic->step_size / voltdm->pmic->slew_rate) * > sys_clk_rate) / 1000; > diff --git a/arch/arm/plat-omap/include/plat/prcm.h b/arch/arm/plat-omap/include/plat/prcm.h > index 267f43b..cc19997 100644 > --- a/arch/arm/plat-omap/include/plat/prcm.h > +++ b/arch/arm/plat-omap/include/plat/prcm.h > @@ -27,9 +27,16 @@ > #ifndef __ASM_ARM_ARCH_OMAP_PRCM_H > #define __ASM_ARM_ARCH_OMAP_PRCM_H > > +struct omap_osc_data { > + u32 clk_setup_ret; > + u32 clk_setup_off; > +}; > + > u32 omap_prcm_get_reset_sources(void); > int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest, > const char *name); > +void omap_osc_register(struct omap_osc_data *osc); > +struct omap_osc_data *omap_osc_get(void); > > #endif > > -- Regards, Nishanth Menon -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html