From: Sripathy, Vishwanath <vishwanath.bs@xxxxxx> Add OMAP4460 OPP definitions for voltage and frequencies based on OMAP4460 ES1.0 DM Operating Condition Addendum Version 0.1 The following exceptions are present: * Smartreflex support is still on experimental mode: the gains and min limits are currently pending characterization data. Currently OMAP4430 values are used. * Efuse offset for core OPP100-OV setting is not clear in documentation. * IVA OPPs beyond OPP100 are disabled due to the delta between max OMAP4460 current requirements and Phoenix Max supply on VCORE2 in the default configuration - boards which have supply which can support this should explicitly call opp_enable and enable the same. * MPU OPPs > OPPTURBO can easily be detected using a efuse burnt - currently disabled pending clock changes to support DCC feature. [nm@xxxxxx: cleanups and updates from Datamanual] Signed-off-by: Nishanth Menon <nm@xxxxxx> Signed-off-by: Vishwanath BS <vishwanath.bs@xxxxxx> --- Patch is generated against latest lo master. Changes in V2: Updated the commit log as per Nishant's comments. Patch has some checkpatch warnings related to line over 80 chars. They have been retained to keep the readability of the code. arch/arm/mach-omap2/control.h | 1 + arch/arm/mach-omap2/omap_opp_data.h | 9 ++- arch/arm/mach-omap2/opp4xxx_data.c | 96 ++++++++++++++++++++++--- arch/arm/mach-omap2/voltagedomains44xx_data.c | 14 +++- 4 files changed, 105 insertions(+), 15 deletions(-) diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index a016c8b..a41b9a7 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -195,6 +195,7 @@ #define OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO 0x249 #define OMAP44XX_CONTROL_FUSE_CORE_OPP50 0x254 #define OMAP44XX_CONTROL_FUSE_CORE_OPP100 0x257 +#define OMAP44XX_CONTROL_FUSE_CORE_OPP100OV 0x25A /* AM35XX only CONTROL_GENERAL register offsets */ #define AM35XX_CONTROL_MSUSPENDMUX_6 (OMAP2_CONTROL_GENERAL + 0x0038) diff --git a/arch/arm/mach-omap2/omap_opp_data.h b/arch/arm/mach-omap2/omap_opp_data.h index c784c12..18a750e 100644 --- a/arch/arm/mach-omap2/omap_opp_data.h +++ b/arch/arm/mach-omap2/omap_opp_data.h @@ -89,8 +89,11 @@ extern struct omap_volt_data omap34xx_vddcore_volt_data[]; extern struct omap_volt_data omap36xx_vddmpu_volt_data[]; extern struct omap_volt_data omap36xx_vddcore_volt_data[]; -extern struct omap_volt_data omap44xx_vdd_mpu_volt_data[]; -extern struct omap_volt_data omap44xx_vdd_iva_volt_data[]; -extern struct omap_volt_data omap44xx_vdd_core_volt_data[]; +extern struct omap_volt_data omap443x_vdd_mpu_volt_data[]; +extern struct omap_volt_data omap443x_vdd_iva_volt_data[]; +extern struct omap_volt_data omap443x_vdd_core_volt_data[]; +extern struct omap_volt_data omap446x_vdd_mpu_volt_data[]; +extern struct omap_volt_data omap446x_vdd_iva_volt_data[]; +extern struct omap_volt_data omap446x_vdd_core_volt_data[]; #endif /* __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H */ diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c index 2293ba2..8c285e4 100644 --- a/arch/arm/mach-omap2/opp4xxx_data.c +++ b/arch/arm/mach-omap2/opp4xxx_data.c @@ -1,7 +1,7 @@ /* * OMAP4 OPP table definitions. * - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/ * Nishanth Menon * Kevin Hilman * Thara Gopinath @@ -36,7 +36,7 @@ #define OMAP4430_VDD_MPU_OPPTURBO_UV 1313000 #define OMAP4430_VDD_MPU_OPPNITRO_UV 1375000 -struct omap_volt_data omap44xx_vdd_mpu_volt_data[] = { +struct omap_volt_data omap443x_vdd_mpu_volt_data[] = { VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP50_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP50, 0xf4, 0x0c), VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP100_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP100, 0xf9, 0x16), VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO, 0xfa, 0x23), @@ -48,7 +48,7 @@ struct omap_volt_data omap44xx_vdd_mpu_volt_data[] = { #define OMAP4430_VDD_IVA_OPP100_UV 1188000 #define OMAP4430_VDD_IVA_OPPTURBO_UV 1300000 -struct omap_volt_data omap44xx_vdd_iva_volt_data[] = { +struct omap_volt_data omap443x_vdd_iva_volt_data[] = { VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP50_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP50, 0xf4, 0x0c), VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP100_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP100, 0xf9, 0x16), VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_IVA_OPPTURBO, 0xfa, 0x23), @@ -58,14 +58,14 @@ struct omap_volt_data omap44xx_vdd_iva_volt_data[] = { #define OMAP4430_VDD_CORE_OPP50_UV 1025000 #define OMAP4430_VDD_CORE_OPP100_UV 1200000 -struct omap_volt_data omap44xx_vdd_core_volt_data[] = { +struct omap_volt_data omap443x_vdd_core_volt_data[] = { VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP50_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP50, 0xf4, 0x0c), VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP100_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP100, 0xf9, 0x16), VOLT_DATA_DEFINE(0, 0, 0, 0), }; -static struct omap_opp_def __initdata omap44xx_opp_def_list[] = { +static struct omap_opp_def __initdata omap443x_opp_def_list[] = { /* MPU OPP1 - OPP50 */ OPP_INITIALIZER("mpu", true, 300000000, OMAP4430_VDD_MPU_OPP50_UV), /* MPU OPP2 - OPP100 */ @@ -87,6 +87,82 @@ static struct omap_opp_def __initdata omap44xx_opp_def_list[] = { /* TODO: add DSP, aess, fdif, gpu */ }; +#define OMAP4460_VDD_MPU_OPP50_UV 1025000 +#define OMAP4460_VDD_MPU_OPP100_UV 1200000 +#define OMAP4460_VDD_MPU_OPPTURBO_UV 1313000 +#define OMAP4460_VDD_MPU_OPPNITRO_UV 1375000 + +struct omap_volt_data omap446x_vdd_mpu_volt_data[] = { + VOLT_DATA_DEFINE(OMAP4460_VDD_MPU_OPP50_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP50, 0xf4, 0x0c), + VOLT_DATA_DEFINE(OMAP4460_VDD_MPU_OPP100_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP100, 0xf9, 0x16), + VOLT_DATA_DEFINE(OMAP4460_VDD_MPU_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO, 0xfa, 0x23), + VOLT_DATA_DEFINE(OMAP4460_VDD_MPU_OPPNITRO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO, 0xfa, 0x27), + VOLT_DATA_DEFINE(0, 0, 0, 0), +}; + +#define OMAP4460_VDD_IVA_OPP50_UV 1025000 +#define OMAP4460_VDD_IVA_OPP100_UV 1200000 +#define OMAP4460_VDD_IVA_OPPTURBO_UV 1313000 +#define OMAP4460_VDD_IVA_OPPNITRO_UV 1375000 + +struct omap_volt_data omap446x_vdd_iva_volt_data[] = { + VOLT_DATA_DEFINE(OMAP4460_VDD_IVA_OPP50_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP50, 0xf4, 0x0c), + VOLT_DATA_DEFINE(OMAP4460_VDD_IVA_OPP100_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP100, 0xf9, 0x16), + VOLT_DATA_DEFINE(OMAP4460_VDD_IVA_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_IVA_OPPTURBO, 0xfa, 0x23), + VOLT_DATA_DEFINE(OMAP4460_VDD_IVA_OPPNITRO_UV, OMAP44XX_CONTROL_FUSE_IVA_OPPNITRO, 0xfa, 0x23), + VOLT_DATA_DEFINE(0, 0, 0, 0), +}; + +#define OMAP4460_VDD_CORE_OPP50_UV 1025000 +#define OMAP4460_VDD_CORE_OPP100_UV 1200000 +#define OMAP4460_VDD_CORE_OPP100_OV_UV 1250000 + +struct omap_volt_data omap446x_vdd_core_volt_data[] = { + VOLT_DATA_DEFINE(OMAP4460_VDD_CORE_OPP50_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP50, 0xf4, 0x0c), + VOLT_DATA_DEFINE(OMAP4460_VDD_CORE_OPP100_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP100, 0xf9, 0x16), + VOLT_DATA_DEFINE(OMAP4460_VDD_CORE_OPP100_OV_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP100OV, 0xf9, 0x16), + VOLT_DATA_DEFINE(0, 0, 0, 0), +}; + +static struct omap_opp_def __initdata omap446x_opp_def_list[] = { + /* MPU OPP1 - OPP50 */ + OPP_INITIALIZER("mpu", true, 350000000, OMAP4460_VDD_MPU_OPP50_UV), + /* MPU OPP2 - OPP100 */ + OPP_INITIALIZER("mpu", true, 700000000, OMAP4460_VDD_MPU_OPP100_UV), + /* MPU OPP3 - OPP-Turbo */ + OPP_INITIALIZER("mpu", true, 920000000, OMAP4460_VDD_MPU_OPPTURBO_UV), + /* + * MPU OPP4 - OPP-Nitro + Disabled as the reference schematics + * recommends TPS623631 - confirm and enable the opp in board file + * XXX: May be we should enable these based on mpu capability and + * Exception board files disable it... + */ + OPP_INITIALIZER("mpu", false, 1200000000, OMAP4460_VDD_MPU_OPPNITRO_UV), + /* MPU OPP4 - OPP-Nitro SpeedBin */ + OPP_INITIALIZER("mpu", false, 1500000000, OMAP4460_VDD_MPU_OPPNITRO_UV), + /* L3 OPP1 - OPP50 */ + OPP_INITIALIZER("l3_main_1", true, 100000000, OMAP4460_VDD_CORE_OPP50_UV), + /* L3 OPP2 - OPP100 */ + OPP_INITIALIZER("l3_main_1", true, 200000000, OMAP4460_VDD_CORE_OPP100_UV), + /* IVA OPP1 - OPP50 */ + OPP_INITIALIZER("iva", true, 133000000, OMAP4460_VDD_IVA_OPP50_UV), + /* IVA OPP2 - OPP100 */ + OPP_INITIALIZER("iva", true, 266100000, OMAP4460_VDD_IVA_OPP100_UV), + /* + * IVA OPP3 - OPP-Turbo + Disabled as the reference schematics + * recommends Phoenix VCORE2 which can supply only 600mA - so the ones + * above this OPP frequency, even though OMAP is capable, should be + * enabled by board file which is sure of the chip power capability + */ + OPP_INITIALIZER("iva", false, 332000000, OMAP4460_VDD_IVA_OPPTURBO_UV), + /* IVA OPP4 - OPP-Nitro */ + OPP_INITIALIZER("iva", false, 430000000, OMAP4460_VDD_IVA_OPPNITRO_UV), + /* IVA OPP5 - OPP-Nitro SpeedBin*/ + OPP_INITIALIZER("iva", false, 500000000, OMAP4460_VDD_IVA_OPPNITRO_UV), + + /* TODO: add DSP, aess, fdif, gpu */ +}; + /** * omap4_opp_init() - initialize omap4 opp table */ @@ -96,10 +172,12 @@ int __init omap4_opp_init(void) if (!cpu_is_omap44xx()) return r; - - r = omap_init_opp_table(omap44xx_opp_def_list, - ARRAY_SIZE(omap44xx_opp_def_list)); - + if (cpu_is_omap443x()) + r = omap_init_opp_table(omap443x_opp_def_list, + ARRAY_SIZE(omap443x_opp_def_list)); + else if (cpu_is_omap446x()) + r = omap_init_opp_table(omap446x_opp_def_list, + ARRAY_SIZE(omap446x_opp_def_list)); return r; } device_initcall(omap4_opp_init); diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c index cb64996..f516cfe 100644 --- a/arch/arm/mach-omap2/voltagedomains44xx_data.c +++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c @@ -91,9 +91,17 @@ static int __init omap44xx_voltage_early_init(void) * XXX Will depend on the process, validation, and binning * for the currently-running IC */ - omap4_vdd_mpu_info.volt_data = omap44xx_vdd_mpu_volt_data; - omap4_vdd_iva_info.volt_data = omap44xx_vdd_iva_volt_data; - omap4_vdd_core_info.volt_data = omap44xx_vdd_core_volt_data; + if (cpu_is_omap443x()) { + omap4_vdd_mpu_info.volt_data = omap443x_vdd_mpu_volt_data; + omap4_vdd_iva_info.volt_data = omap443x_vdd_iva_volt_data; + omap4_vdd_core_info.volt_data = omap443x_vdd_core_volt_data; + } else if (cpu_is_omap446x()) { + omap4_vdd_mpu_info.volt_data = omap446x_vdd_mpu_volt_data; + omap4_vdd_iva_info.volt_data = omap446x_vdd_iva_volt_data; + omap4_vdd_core_info.volt_data = omap446x_vdd_core_volt_data; + } else { + return -ENODATA; + } return omap_voltage_early_init(prm_mod, prm_irqst_ocp_mod, omap4_vdd_info, -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
