On Fri, Apr 01, 2011 at 01:16:12PM +0300, Ameya Palande wrote:
> Signed-off-by: Ameya Palande <ameya.palande@xxxxxxxxx>
> Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxx>
Reviewed-by: Felipe Balbi <balbi@xxxxxx>
> ---
> arch/arm/mach-omap2/board-rx51-peripherals.c | 66 ++++++++++++++++++++++++++
> 1 files changed, 66 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
> index bbcb677..d8ec895 100644
> --- a/arch/arm/mach-omap2/board-rx51-peripherals.c
> +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
> @@ -38,6 +38,7 @@
> #include <sound/tpa6130a2-plat.h>
> #include <media/radio-si4713.h>
> #include <media/si4713.h>
> +#include <linux/leds-lp5523.h>
>
> #include <../drivers/staging/iio/light/tsl2563.h>
>
> @@ -51,6 +52,7 @@
> #define RX51_WL1251_IRQ_GPIO 42
> #define RX51_FMTX_RESET_GPIO 163
> #define RX51_FMTX_IRQ 53
> +#define RX51_LP5523_CHIP_EN_GPIO 41
>
> /* list all spi devices here */
> enum {
> @@ -67,6 +69,64 @@ static struct tsl2563_platform_data rx51_tsl2563_platform_data = {
> };
> #endif
>
> +#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE)
> +static struct lp5523_led_config rx51_lp5523_led_config[] = {
> + {
> + .chan_nr = 0,
> + .led_current = 50,
> + }, {
> + .chan_nr = 1,
> + .led_current = 50,
> + }, {
> + .chan_nr = 2,
> + .led_current = 50,
> + }, {
> + .chan_nr = 3,
> + .led_current = 50,
> + }, {
> + .chan_nr = 4,
> + .led_current = 50,
> + }, {
> + .chan_nr = 5,
> + .led_current = 50,
> + }, {
> + .chan_nr = 6,
> + .led_current = 50,
> + }, {
> + .chan_nr = 7,
> + .led_current = 50,
> + }, {
> + .chan_nr = 8,
> + .led_current = 50,
> + }
> +};
> +
> +static int rx51_lp5523_setup(void)
> +{
> + return gpio_request_one(RX51_LP5523_CHIP_EN_GPIO, GPIOF_DIR_OUT,
> + "lp5523_enable");
> +}
> +
> +static void rx51_lp5523_release(void)
> +{
> + gpio_free(RX51_LP5523_CHIP_EN_GPIO);
> +}
> +
> +static void rx51_lp5523_enable(bool state)
> +{
> + gpio_set_value(RX51_LP5523_CHIP_EN_GPIO, !!state);
> +}
> +
> +static struct lp5523_platform_data rx51_lp5523_platform_data = {
> + .led_config = rx51_lp5523_led_config,
> + .num_channels = ARRAY_SIZE(rx51_lp5523_led_config),
> + .clock_mode = LP5523_CLOCK_AUTO,
> + .setup_resources = rx51_lp5523_setup,
> + .release_resources = rx51_lp5523_release,
> + .enable = rx51_lp5523_enable,
> +};
> +#endif
> +
> static struct omap2_mcspi_device_config wl1251_mcspi_config = {
> .turbo_mode = 0,
> .single_channel = 1,
> @@ -816,6 +876,12 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
> .platform_data = &rx51_tsl2563_platform_data,
> },
> #endif
> +#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE)
> + {
> + I2C_BOARD_INFO("lp5523", 0x32),
> + .platform_data = &rx51_lp5523_platform_data,
> + },
> +#endif
> {
> I2C_BOARD_INFO("tpa6130a2", 0x60),
> .platform_data = &rx51_tpa6130a2_data,
> --
> 1.7.1
>
--
balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
