For various reasons, Linux now only officially supports being built with tools which are new enough to understand the SMC instruction. Replacing the hand-encoded instructions when the mnemonic also allows for correct assembly in Thumb-2 (otherwise, the result is random data in the middle of the code). The Makefile already ensures that this file is built with a high enough gcc -march= flag (armv7-a). Signed-off-by: Dave Martin <dave.martin@xxxxxxxxxx> Tested-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx> --- arch/arm/mach-omap2/sleep34xx.S | 14 +++++++------- 1 files changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index 98d8232..a05c348 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -133,7 +133,7 @@ ENTRY(save_secure_ram_context) mov r6, #0xff mcr p15, 0, r0, c7, c10, 4 @ data write barrier mcr p15, 0, r0, c7, c10, 5 @ data memory barrier - .word 0xE1600071 @ call SMI monitor (smi #1) + smc #1 @ call SMI monitor (smi #1) nop nop nop @@ -408,7 +408,7 @@ skipl2dis: adr r3, l2_inv_api_params @ r3 points to dummy parameters mcr p15, 0, r0, c7, c10, 4 @ data write barrier mcr p15, 0, r0, c7, c10, 5 @ data memory barrier - .word 0xE1600071 @ call SMI monitor (smi #1) + smc #1 @ call SMI monitor (smi #1) /* Write to Aux control register to set some bits */ mov r0, #42 @ set service ID for PPA mov r12, r0 @ copy secure Service ID in r12 @@ -419,7 +419,7 @@ skipl2dis: ldr r3, [r4, #0xBC] @ r3 points to parameters mcr p15, 0, r0, c7, c10, 4 @ data write barrier mcr p15, 0, r0, c7, c10, 5 @ data memory barrier - .word 0xE1600071 @ call SMI monitor (smi #1) + smc #1 @ call SMI monitor (smi #1) #ifdef CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE /* Restore L2 aux control register */ @@ -434,7 +434,7 @@ skipl2dis: adds r3, r3, #8 @ r3 points to parameters mcr p15, 0, r0, c7, c10, 4 @ data write barrier mcr p15, 0, r0, c7, c10, 5 @ data memory barrier - .word 0xE1600071 @ call SMI monitor (smi #1) + smc #1 @ call SMI monitor (smi #1) #endif b logic_l1_restore @@ -443,18 +443,18 @@ l2_inv_api_params: l2_inv_gp: /* Execute smi to invalidate L2 cache */ mov r12, #0x1 @ set up to invalidate L2 - .word 0xE1600070 @ Call SMI monitor (smieq) + smc #0 @ Call SMI monitor (smieq) /* Write to Aux control register to set some bits */ ldr r4, scratchpad_base ldr r3, [r4,#0xBC] ldr r0, [r3,#4] mov r12, #0x3 - .word 0xE1600070 @ Call SMI monitor (smieq) + smc #0 @ Call SMI monitor (smieq) ldr r4, scratchpad_base ldr r3, [r4,#0xBC] ldr r0, [r3,#12] mov r12, #0x2 - .word 0xE1600070 @ Call SMI monitor (smieq) + smc #0 @ Call SMI monitor (smieq) logic_l1_restore: ldr r1, l2dis_3630 cmp r1, #0x1 @ Test if L2 re-enable needed on 3630 -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
