This set of patches, along with some other patches under
discussion on alkml, should enable omap3 and omap4 kernels to be
built with CONFIG_THUMB2_KERNEL.
This patch set builds on recent cleanup done by the omap
maintainers.
It is also more aggressive than my last post: all affected
low-level code is now built in Thumb-2. At least some of this
code definitely works, most features have been tested
successfully. Further testing is still welcome.
Seems to work with CONFIG_SMP_ON_UP and CONFIG_THUMB2_KERNEL
enabled on Beagle xM A2 and Panda A1.
Thanks also to Santosh Shilimkar <santosh.shilimkar@xxxxxx>
for his help with testing.
v3:
* make SMC instruction syntax more consistent
* remove do_wfi() in favour of the generic wfi() macro
As part of my ongoing commitment to the environment, this patch
contains over 90% recycled material.
Details below.
Cheers,
Dave
The patches can be found, along with a buildable working tree,
in the following repo:
git://git.linaro.org/people/dmart/linux-2.6-arm.git
* arm/omap-thumb2: has the patches proposed here
* arm/omap-thumb2+merged: additionally has some patches cherry-
picked from other trees which are needed in order for the
patches on arm/omap-thumb2 to work usefully.
* dirty/arm/omap-thumb2+merged: buildable test tree, which adds
2 local patches to work around a toolchain bug.
A working kernel config for this tree is here:
http://people.linaro.org/~dmart/arm_omap-thumb2+v2_config :
CONFIG_SMP_ON_UP=y
CONFIG_THUMB2_KERNEL=y
CONFIG_SERIAL_OMAP=n (to avoid garbage on xM; for Panda use console=ttyS2)
(The config is derived from the linaro omap config and so turns on
loads of modules -- don't feel you have to build them all...)
Cherry-picked patches originated from Russell's devel tree
and Tony Lindgren's omap-testing tree:
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm.git devel
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git omap-testing
This series also depends on one un-merged patch to generic-ise
the wfi() macro:
git://git.linaro.org/people/dmart/linux-2.6-arm.git arm/wfi-macro
Dave Martin (5):
ARM: omap4: Replace custom do_wfi() with generic wfi()
ARM: omap4: Convert END() to ENDPROC() for correct linkage with
CONFIG_THUMB2_KERNEL
ARM: omap3: Remove hand-encoded SMC instructions
ARM: omap3: Thumb-2 compatibility for sram34xx.S
ARM: omap3: Thumb-2 compatibility for sleep34xx.S
arch/arm/mach-omap2/include/mach/omap4-common.h | 7 ---
arch/arm/mach-omap2/omap-headsmp.S | 2 +-
arch/arm/mach-omap2/omap-hotplug.c | 3 +-
arch/arm/mach-omap2/omap44xx-smc.S | 8 ++--
arch/arm/mach-omap2/pm44xx.c | 3 +-
arch/arm/mach-omap2/sleep34xx.S | 56 ++++++++++++++++-------
arch/arm/mach-omap2/sram34xx.S | 28 ++++++++---
7 files changed, 68 insertions(+), 39 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
