This patch series introduces smartreflex and voltage driver support
for OMAP3430 and OMAP3630. SmartReflex modules do adaptive voltage
control for real-time voltage adjustments.
Originally all the functionalities introduced in this patch
were present in arch/arm/mach-omap2/smartreflex.c file in Kevin's
pm tree. This patch series does a major rewrite of this file
and introduces a separate voltage driver. Major contributors
to the original driver are
Eduardo Valentin (1):
OMAP3: PM: SmartReflex: Fix scheduled while atomic problem
Kalle Jokiniemi (1):
OMAP3: PM: SmartReflex driver integration
Kevin Hilman (2):
temp: SR: IO_ADDRESS conversion
OMAP: SR: OPP interfaces removed from OMAP PM layer
Nishanth Menon (1):
omap3: pm: sr: replace get_opp with freq_to_opp
Paul Walmsley (2):
OMAP SR: use opp_find_opp_by_opp_id()
OMAP SR: use OPP API for OPP ID, remove direct access
Phil Carmody (2):
OMAP3: PM: Don't do unnecessary searches in omap_sr_vdd*_autocomp_store
OMAP3: PM: Early exit on invalid parameters
Rajendra Nayak (9):
OMAP3: SR: Fix init voltage on OPP change
OMAP3: SR: Update VDD1/2 voltages at boot
OMAP3: SR: Use sysclk for SR CLKLENGTH calc
OMAP3: SR: Reset voltage level on SR disable
OMAP3: SR: Replace printk's with pr_* calls
OMAP3: SR: Remove redundant defines
OMAP3: SR: Fix SR driver to check for omap-pm return values
OMAP3: PM: Put optimal SMPS stabilization delay
OMAP3: SR: Wait for VP idle before a VP disable
Roger Quadros (4):
OMAP3: PM: Fix Smartreflex when used with PM_NOOP layer
OMAP3: PM: Make Smartreflex driver independent of SRF
OMAP3: PM: Do not Enable SmartReflex if OPP tables not defined
OMAP3: PM: Smartreflex: Fix VDD2 OPP determining logic
Romit Dasgupta (1):
omap: pm: SR: use enum for OPP types
Teerth Reddy (1):
OMAP3: SR: Replace SR_PASS/FAIL,SR_TRUE/FALSE
Tero Kristo (1):
Smartreflex: Avoid unnecessary spam
This patch series is based against lo-master with the following additional
patches applied.
https://patchwork.kernel.org/patch/266911/
https://patchwork.kernel.org/patch/266921/
https://patchwork.kernel.org/patch/266931/
https://patchwork.kernel.org/patch/183712/
https://patchwork.kernel.org/patch/285872/
The entire series with the dependencies are available at
http://dev.omapzoom.org/?p=thara/omap-dvfs.git;a=summary
head: thara-pm-sr
This patch series has been tested on OMAP3430 SDP with omap2plus_defconfig
with the following menuconfig options enabled.
System type -> TI OMAP Implementations -> Smartreflex Support
System type -> TI OMAP Implementations ->
Class 3 mode of Smartreflex Implementation
Thara Gopinath (9):
OMAP3: PM: Adding voltage driver support for OMAP3
OMAP3: PM: Adding smartreflex driver support.
OMAP3: PM: Adding smartreflex device file.
OMAP3: PM: Adding smartreflex hwmod data
OMAP3: PM: Adding smartreflex class3 driver
OMAP3: PM: Adding T2 enabling of smartreflex support
OMAP3: PM: Adding debug support to Voltage and Smartreflex drivers
OMAP3: PM: Program correct init voltages for VDD1 and VDD2
OMAP3: PM: Register TWL4030 pmic info with the voltage driver.
arch/arm/mach-omap2/Makefile | 5 +-
arch/arm/mach-omap2/control.h | 27 +
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 249 +++++
arch/arm/mach-omap2/pm.c | 68 ++
arch/arm/mach-omap2/smartreflex-class3.c | 59 ++
arch/arm/mach-omap2/smartreflex.c | 1005 ++++++++++++++++++
arch/arm/mach-omap2/sr_device.c | 177 ++++
arch/arm/mach-omap2/voltage.c | 1369 +++++++++++++++++++++++++
arch/arm/plat-omap/Kconfig | 45 +
arch/arm/plat-omap/include/plat/smartreflex.h | 271 +++++
arch/arm/plat-omap/include/plat/voltage.h | 142 +++
arch/arm/plat-omap/opp_twl_tps.c | 17 +
drivers/mfd/twl-core.c | 7 +-
drivers/mfd/twl4030-power.c | 29 +
include/linux/i2c/twl.h | 1 +
15 files changed, 3468 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/mach-omap2/smartreflex-class3.c
create mode 100644 arch/arm/mach-omap2/smartreflex.c
create mode 100644 arch/arm/mach-omap2/sr_device.c
create mode 100644 arch/arm/mach-omap2/voltage.c
create mode 100644 arch/arm/plat-omap/include/plat/smartreflex.h
create mode 100644 arch/arm/plat-omap/include/plat/voltage.h
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
